JBC WSBT Stand for WS440 High Temperature Wire Stripper Tweezers Instruction Manual

JBC WSBT Stand for WS440 High Temperature Wire Stripper Tweezers

Instruction Manual

Packing List

The following items are included:

Stand for WS140 and WS440 …………………………………… 1 unit

Stand Cable (length 1m) ……………………1 uni

Manual ………………………………………………. 1 unit

Features and Connections

Changing Cartridges

1. Removing

Loosen the screws and remove the cartridges.

2. Inserting

Insert the cartridge until the reference ring touch against the wire stripper. Take the ring as reference and check that both tips match.
Important: It is esential to insert the cartridge till the end for a good connection.

3. Positioning

Align the tip edges and fi x the cartridges in its working position.

4. Fixing

Tightening the screw. Important: It is essential to tighten the screws for the tool to function.

Changing W440 Cartridges

1. Removing

Loosen the screws and remove the cartridges

2. Inserting

Insert the cartridge until the reference mark.
Take the mark as reference and check that both tips match.
Important: It is esential to insert the cartridge till the mark for a good connection.

3. Positioning

Align the cartridges in working position using a fl at pliers (JBC Ref. PLR-195).
The conical cartridge aligner helps centering both cartridges and ensure a good functionality

4. Fixing

Fix the cartridges in its working position. by tightening the screw.
Important: It is essential to tighten the screws for the tool to function.

Cartridge Range W140

WS140-A is compatible with W140 Blade Cartridge Range. Find the model that best suits your soldering needs on www.jbctools.com.

If an application requires a special tip design, contact JBC by mail customtips@jbctools.com for special blade cartridges.
WS440-A is compatible with W440 Blade Cartridge Range. Find the model that best suits your soldering needs on www.jbctools.com.
If an application requires a special tip design, contact JBC by mail customtips@jbctools.com.

Accessories

Maintenance

Before carrying out maintenance or storage, always unplug the stand from the station and the tool.
– Use a damp cloth to clean the stand. Alcohol can be used only when cleaning the metal parts.
– Check periodically that the metal parts of the tool/stand are clean so that the station can check the tool’s status.
– Periodically check all cables and tube connections.
– Replace any defective or damaged parts. Use original JBC spare parts only.
– Repairs should only be performed by a JBC authorized technical service

Warning

– Do not touch the blade or the metal parts arround.
– Do not allow the blade be close to flammable materials.
– Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
– This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved.
– Maintenance must not be carried out by children unless supervised.
– Place the tool on the stand when is not in use.
– Turn off the power when not in use, changing parts or storing.

Caution

– Do not use the Wire Stripper for other applications than wire stripping.
– Do not modify or customize the Wire Stripper.
– Do not hit the blade against workbench to eliminate stripped insulation debris. This behavior would damage the blade.
– Remove power from the tool by holding the plug, not the wires.
– Be careful with the fumes produced when stripping. We recomend to use our fume extractor

Specifications

WSBT
Stand for WS140 and WS440 Ref.: WSBT-A
– Total Net Weight: 1.30 kg / 2.86 lb
– Package Dimension/Weight: 342 x 155 x 120 mm / 1.64 kg
(L x W x H) 13.46 x 6.10 x 4.72 in / 3.61 lb Complies with CE standards ESD Safe

Warranty

JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase.

Read More About This Manual & Download PDF:

References

• JBC Soldering Stations, Irons and Rework equipment for electronics
• Warranty Extension

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>