EARUELETRIC AC100-240V WiFi Switch User Manual

EARUELETRIC AC100-240V WiFi Switch

Warnings:

1. The product can only be paired with a 2.4G WIFi router, 5G WIFI router is not accepted
2. Set the Wil account name and password to the numbers and letters used by the family, and do not use special symbols

installation guide

1. Live cable ronnection tem,inal “L
2. Bulb cable connection terminals “L 1, L2, L3, L4”
3. Neutral cable connection terminal “N”
   (Note: Neutral cable is required)

Cable wiring diagram

Fix the switch to the wall

1. Put the bracket in the box on the wall
2. Install two fixing screws
3. Connect cables as required
4. Clip the equipment into the mounting bracket
5. Turn on the power and the device

will start to work
Indicator Status

1. WiFi indicator flashes quickly
   • Fast distribution network mode(EZ Mode)
2. WiFi indicator flashes slowly
   • AP distribution network mode(AP Mode)
3. WiFi indicator is always on on-line
4. WiFi indicator is always off off-line

How to download an application

Scan the QR code shown on the right, or search for Smart Life i1 in the IOS app store or Google play store

How to log application

1. Download or scan the QR code and install Smart Life Application
2. The app will ask you to register your account
3. Enter your previous phone number or email, and then select the country/region
4. Get the verification code
5. Input the verification code
6. Login with password

Create a family

1. Enter the family name and select the n0m
2. Successful creation offamMy

How to add new devices in quick connect {EZ Mode)

1. Make sure the phone is connected to the WiFi network, and then tum on the power
2. press and hold any touched button for 5-8 seconds until the WiFi indicator flashes rapidly
3. Open the application, press “add device” or” +” and select “wifi switch”to add.
4. Select the WiFi network, input the WiFi password, and use “EZ Mode” to connect.
5. After connecting, the application win request to connect
6. Rename the device and select the room, then click Finish (Note: names must be number.; and letter.;, do not use special symbols)

Add new device to the tAP Model

1. Make sure the phone is connected to a WiFi network, and then tum on the power
2. When the WiFi indicator flashes rapidly (EZ Mode), continue to press for 5-8 seconds, the WiFi indicator will flash slowly, about once every 3 seconds (AP Mode)
3. Open the application, press “add device” or” +” and select “wifi switch” to add
4. Select WiFi network, input the WiFi password, and use “AP Mode” to connect
5. press·gotoconnecf’
6. select smart life XXXX, and then click Connect
7. Return to page
8. Waiting for the completion of the distribution network

Specifications

• Input voltage : AC100-240V
• Rated current :16A
• Frequency : 50/60 Hz
• WiFi frequency : 2.4 GHz

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>