ZOWZEA AC Motor Speed Controller User Manual

DIALROUTER SPEED CONTROL

Thyristor Electronic Voltage Regulator/Speed Controller/High Power Regulator

PRODUCT DIMENSION

DIAL ROUTER SPEED CONTROL
THYRISTOR ELECTRONIC VOLTAGE REGULATOR

• Adapt to electrical appliances

• Notice Tips: The following products can not use(lnlemal circuit boards and electronic components ) SCR electronic voltage regulator

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read ali instructions before using this product!

1. Non-professionals prohibited operation.Familiar with product perfor-mance and operating instructions.
2. Avoid electrical shock.Non-professionals are forbidden to open the shell, the accessories in the machine are charged, high pressure danger.
3. Keep work area clean.Cluttered areas invite injuries.
4. Observe work area conditions.Do not operate in damp or wet locations. Don’t expose to rain. Keep work area well lighted.
5. Keep children away.Children must never be allowed in the work area.Do not let them handle machines, tools,or extension cords.
6. Store idle equipment.When not in use,tools must be stored ina dry location to inhibit rust. Always lock up tools out of reach of children.
7. Maintain tools with care. Inspect too! cords periodically and, if damaged. have them repaired by an authorized technician.
8. Use the right tool for the job. Do not attempt to force a smail tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool anddonot use this tool for a purpose for which it was not intended.
9. Stay alert. Watch what you are doing,use common sense.Do not operate any tool when you are tired.
10. Check for damaged parts.Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate property and perform its intended function.Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool-if any switch does not turn On and Off property.
11. Replacement parts and accessories.When servicing, use only identical replacement parts.Use of any other parts will void the warranty.
12. Do not operate tool if under the influence ofalcohol or drugs.Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt,do not operate the tool.
13. Use proper size and type extension cord. If an extension cord is required. It must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, orcause electrical damage to the toolThis tool requires use of an extension- cord of 0 to 10 amps capability (up to 50 feet), with wire size rated at 0.75mm’. Longer extension cords require larger size wire.If you are using the tool out- doorsuse an extension cord rated for outdoor use.(Signified byWA”on the jacket).
14. Maintenance.For your safetyservice and maintenance should be performed regularly by a qualified technician.
    Note:Perfor mance of this tool may vary depending on variations in local line voltage Extension cord usage may also affect ool performance.

Functions and precautions

1. The machine has functions such as temperature adjustment, light adjustment, speed adjustment, and voltage adjustment.
   • Temperature adjustment: Resistanceheating wireheating tube, electric furnace, etc.
   • Light adjustment:dimming incandescent lamps,dimmable LED Lamps.HV halogen lamps and Tungsten filament bulbs, etc.
   •  Speed adjustment:Fans, exhaust fans, electric drills.angle grinders.etc.
   • Voltage adjustment:Reduce the mains voltage and change the load power.
   Warning: will not work on soft/slow start voltage regulator and inductive transformer, Ordinary LED lights, household appliances cannot be used.

Operation

1. Before using, read and understand all instructions and safety warnings in theinstruction manual provided by the manufacturer of the router being used. Verify that the router’s Power Switch(2)is in the”OFF*position. and turn the Speed Knob(4)to dial “0%” position, Router’s electrical cord (1)Plug into the power outletLoad power cord piug into the Router’s outlet socket(5)
2. Insert the Router Speed Control Piug(1)intoan electrical outlet or extension cord(see SafetyPrecaution regarding extension cords).
3. For variable speed control, Turn on the power switch(2)”ON” position.and turn the Speed Knob to Low,Medium, or High speed.
4. The output voltmeter( 3)shows the corresponding voltage value(must have connected load to ergulate voltage). The higher the voltage, the faster the speed, the lower the voltagethe slower the speed.
5. During variable speed operation if turn the Speed Knob(4) to dial” 100%” position for full speed operation, if turn the Speed Knob(4)to dial”0%” position for the stop state.
6. When finished, turn-off the Router’s power Switch and press the power Switch to the OFF position.
7. Unplug the Router Speed Control from the electrical outlet.

Maintenance

1. Store the Dial Router Speed Control in a clean and dry location.
2. The machine will be slightly hot when working,so it should be placed in a ventilated and dry place for use
3. The power switch has overload protection function.When the power switches the load off and only on again after some time Overheating protection has tripped.Reduce the connected load.

Fitting and electrical connection

DANGER!!!
Electrical shock when live parts are touched.Electrical shocks can be fatal Before carrying out work on the device or load, disconnect all the corresponding circuit breakers.Cover up live parts in the working environment. Warning: The warnings,cautions,and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.it must be understood by the operator that common sense and caution are factors which cannot be built into this product,but must be supplied by the operator

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>