TAO 1tiny UVC-HDMI Capture Converter User Manual
- June 15, 2024
- TAO
Table of Contents
TAO 1tiny UVC-HDMI Capture Converter User Manual
Overview
About TAO 1tiny
TAO 1tiny is the essential accessory for compact webcam and apt camera
users, enabling those cameras to become HDMI native devices connectable almost
anywhere. This tiny inline convertor- measuring at just 9x5x3cm, provides HDMI
connectivity for camera sand similar USB-C UVC capture devices, supporting
popular VESA standard resolutions up to4KVideo transcoded to HDMI is
uncompressed with full fidelity maintained for superior visual performance.
Parts Info
- Type C Power Port
- USB 2.0 COM Port
- USB Type C Input Port
- HDMI 2.0 Output Port
Note:
- If the input UVC signal is 4K@30 and the HDMI OUT connecting to 4K monitor, the output resolutionupto4K@60.
- Power of Adapter is not less than:5V/2A/10W;Do not use the USB port of the computer for power supply
Connecting TAO 1tiny
Installing TAO 1tiny
TAO 1tiny supports USB 3.0 (UVC compliance) to HDMI 2.0 output. It can work
with USB camera and mini series.
How to Work With USB Camera
Please operate as shown in the following figure:
- Connecting Power Port with power supply.
- Connecting USB-C Input Port with USB Camera via USB-C cable.(TAO 1tiny can supply power toUSBcamera:5V/1A)
- Connecting HDMI 2.0 Output Port with monitor via HDMI cable.
⚠ If necessary, you can plug in USB Receiver into USB 2.0 Port to control USB camera via remote control.
How to Work With mini Series
Please operate as shown in the following figure:
- Connecting Power Port of TAO 1tiny with power supply.
- Connecting mini-pro with USB-C Input Port via USB 3.0 to USB-C cable.
- Connecting HDMI 2.0 Output Port with monitor via HDMI cable.
Firmware Upgrade
TAO 1tiny can be upgraded via USB disk. The device will auto-upgrade after plugging USB disk(including the late subgrade firmware) to USB 2.0 port. The device will auto-restart after upgrade and you can find a file of upgrade done in the USB disk. Besides, the HDMI monitor will show the message of “Upgrade Done” and upgrade version. ⚠ Do not disconnect the device during firmware upgrade.
Warranty
All products are designed and tested to the highest quality standard and backed by 1 years parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RG Blink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages. Warranty is return to base. Return for repairs are accepted only where shipping charges are prepaid.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>