Laphivieh 12 Inch Semi Flush Mount Lighting Vintage Brass Ceiling Light Fixture Instruction Manual

**Laphivieh 12 Inch Semi Flush Mount Lighting Vintage Brass Ceiling Light Fixture Instruction Manual

**

Before Getting Started

Please read and understand the entire manual before attempting to assemble, operate or install the product. If you feel you do not have enough electrical wiring experience, we recommend installation of this lighting fixture be done by a licensed electrician.
When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
When you have finished assembling the product, place it on a flat surface and make sure it is stable before use.
Do not let children play with this product.

Risk of suffocation! Keep any packaging materials away from children.

Lighting Care Instructions

Caution there is a risk of shock. Turn off power source before installation or cleaning.
Switch off and allow bulb to cool before replacing bulb or cleaning.
Use a soft clean dry cloth that will not scratch or smudge the surface when cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Cleaning & Maintenance

Keep the product away from direct heat and sunlight.
Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Regular vacuuming or light brushing helps to remove dirt and prevent soil build-up, which increases the appearance wear.
Periodically (every 90 days) make sure that the screws are fully tightened.

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

ASSEMBLING THE FIXTURE

1. Connect the lamp socket with glass shade by screwing two nuts (Fig. 1).
   

2. Remove back plate (A) from fixture base (B) by unscrewing base screws (C).

3. Unscrew the nut (H) at the top of the fixture body (D).

4. Connect the fixture base (B) with the fixture body (D) by screwing the nut (H).
   MOUNTING THE FIXTURE (Fig.2)
   

5. Attach back plate (A) to ceiling outlet box and tighten with mounting screws (E).
   CONNECTING THE WIRES (Fig. 3)
   

6. At this point, connect the electrical wires as shown in Fig.2, making sure that all wire connectors (G) are secured. You may have to wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixtures ground wire to it. No loose strands or loose connections should be present. Secure wire connectors with U.L./CSA Listed electrical tape. After the wires are connected, tuck them neatly into the ceiling junction box.
   COMPLETING THE INSTALLATION

7. Raise the fixture base (B) to the affixed back plate (A) and insert base screws (C) to secure fixture base to the ceiling.

8. Insert the light bulb (F) into socket. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING! Bulb NOT INCLUDED in the package.

Your installation is now complete. Return the power to the junction box and test the fixture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>