zelmer ZMB6000 Beard Trimmer User Manual
- June 15, 2024
- zelmer
Table of Contents
zelmer ZMB6000 Beard Trimmer
ZMB6000 – Beard Trimmer
Specifications
| Description | Value |
|---|---|
| Blades | 1 |
| On switch | 2 |
| Digital display screen | 3 |
| Limit comb | 3mm(a)/6mm(b)/9mm(c)/12mm(d) |
Product Usage Instructions
Safety Instructions
- This device can be used by children aged 3 or over under supervision.
- This device can be used by children aged 8 years and above and persons with reduced physical, sensory or mental abilities or lack of experience and knowledge if they are supervised or have received proper instructions regarding use of the device in a safe manner and understand the dangers involved.
- Children must not play with the device. Cleaning and maintenance operations to be performed by the user must always be supervised.
- This device can only be connected with the USB interface (5VDC, Output Max 1A).
- Follow the DEVICE CHARGE instructions in order to charge it.
- Follow the device BATTERY REMOVAL instructions for removal of the batteries from the device.
- This appliance is intended for use at a maximum altitude of 2000m above sea level.
Device Charge
Before using the device, make sure it is fully charged.
- Connect the USB charging cable (5) to the device and the power source.
- The digital display screen (3) will show the current battery level during charging, and it will always display “99” when fully charged.
- The trimmer cannot be overcharged. However, if the product is not used for an extended period of time (2-3 months), disconnect it from the power source and store it. Recharge the battery fully before using it again. To maintain battery life, discharge it every 2 months and then recharge it for 2-3 hours.
Lock/Unlock Function
To lock the device
- Press and hold the on switch (2) for 3 seconds.
- To unlock the device, press and hold the on switch (2) for 3 seconds again.
- The lock function icon will appear on the display screen after activation.
Trimming Beard
- Choose the desired limit comb (4) based on the desired length: 3mm(a)/6mm(b)/9mm(c)/12mm(d).
- Attach the selected limit comb (4) to the blades (1).
- Turn on the device by pressing the on switch (2).
- Gently move the device over your beard in the desired direction to trim it.
Cleaning and Maintenance
Before cleaning the device, make sure it is disconnected from the power
source.
- Use the brush (6) to remove any hair or debris from the blades (1).
- Apply a small amount of lubricating oil (7) to the blades (1) to ensure smooth operation.
Battery Removal
When removing the batteries, make sure the device is disconnected from the
power source.
FAQ
-
Q: Can children use this device?
A: Yes, children aged 3 or over can use this device under supervision. Children aged 8 years and above and persons with reduced physical, sensory or mental abilities can also use it if they are supervised or have received proper instructions. -
Q: Can I use this device on wet hair?
A: No, do not use the device on wet hair. -
Q: How often should I charge the device?
A: It is recommended to fully charge the device before each use. To maintain battery life, discharge it every 2 months and then recharge it for 2-3 hours. -
Q: How do I lock/unlock the device?
A: To lock the device, press and hold the on switch for 3 seconds. To unlock it, press and hold the on switch for 3 seconds again. -
Q: How do I clean the device?
A: Disconnect the device from the power source and use the brush to remove hair or debris from the blades. Apply lubricating oil to the blades for smooth operation. -
Q: How do I remove the batteries?
A: When removing the batteries, make sure the device is disconnected from the power source. We hope you enjoy using the ZMB6000 Beard Trimmer! If you have any further questions, please refer to the user manual or contact our customer support.
WE WOULD LIKE TO THANKS YOU FOR CHOOSING ZELMER, WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.
WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT.
STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.
DESCRIPTION
- Blades
- On switch
- Digital display screen
- Limit comb 3mm(a)/6mm(b)/9mm(c)/12mm(d)
- USB charging cable
- Brush
- Lubricating oil
SAFETY INSTRUCTIONS
- This device can be used by children aged 3 or over under supervision. This device can be used by children aged 8 years and above and persons with reduced physical, sensory or mental abilities or lack of experience and knowledge if they are supervised or have received proper instructions regarding use of the device in a safe manner and understand the dangers involved. Children must not play with the device. Cleaning and maintenance operations to be performed by the user must always be supervised.
- This device can only be connected with the USB interface (5VDC, Output Max 1A). Follow the DEVICE CHARGE instructions in order to charge it.
- Follow the device BATTERY REMOVAL instructions for removal of the batteries from the device.
- This appliance is intended for use at a maximum altitude of 2000m above sea level.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for
commercial or industrial use under any circumstances.
- Do not use the device on wet hair.
- Do not use connect or disconnect the device to the mains with your hands or feet wet. Do not use any accessories other than those supplied.
- Do not use this device near to bathtubs, showers, sinks or other tanks that contain water.
- The mains connection cable must not be tangled or wrapped around the product during use. Do not pull on the cable to unplug it or use it to carry the product.
- Do not wrap the cable around the device.
- Proceed according to the cleaning section of this manual for cleaning. Do not use the product on animals.
- Unplug the product immediately from the mains in the event of any breakdown and contact an authorized Technical support service.
- In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the brand´s Official Technical support service may carry out repairs or procedures on the device.
- Any incorrect use or improper handling of the product shall render the warranty null and void. Only an authorized technical support service center may carry out repairs on this product.
- B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.
CHARGING THE DEVICE
- Before using your beard trimmer for the first time, charge for 2-3 hours, and charge 2 hours regularly. Ensure the product is switched off. First insert the plug on the end of the USB charging cable lead into the unit ?(Fig. 1) and then connect the USB charging cable to the USB interface. This appliance is suitable for 5V DC Max 1A charger, computer and other power interface (Fig. 2). The charging indicator icon will flash on the LCD display when it’s charging and when it’s fully charged it will show 99. The display will always show the remaining battery level.
- Your hair clipper cannot be overcharged. However, if the product is not going to be used for an extended period time (2-3 months), unplug it from the mains and store. Fully recharge your hair clipper when you like to use it again.
- To preserve the life of your batteries, let them run out every 2 months then recharge for 2-3 hours again.
INSTRUCTIONS FOR USE
Prior to turning the device on, select the desired comb guide (a,b,c or d)
fitting it by pushing forward in a proper way (fig 3-4). If the hand combing
needs to be replaced, pull upwards by hand. Open the bottom end of the comb
lock and push forward (fig 5-6).
Choose between four levels of matching comb to cut hair of different lengths. The length of the cut is indicated on each limit comb as follows
HOW TO SWITCH ON/OFF THE LOCK FUNCTION?
Long press for 3 seconds to lock the machine and then long press for 3 seconds to unlock. The display will show lock function icon when it’s activated.
HOW TO TRIM BEARD
For different beard styling please refer from Fig.7 to Fig.12
MAINTENANCE AND CLEANING
- After a continuous use of more than 15 minutes, the display will show washing function icon as a reminder.
- It will disappear if you turn off the machine and turn it on again.
- You can rinse the blades under the tap and make sure to dry them properly. Unplug the product when you do not intend to use it for an extended period of time to prolong its shelf-life. Allow the device to cool down prior to storage. Separate the tool head from the body and use the cleaning brush to remove dust from the internal parts (Fig.13).
- Apply a drop of oil on one of the edges of the blades for their maintenance, and turn on the device for a few seconds to distribute it. This should be done when you notice a certain amount of difficulty during the trimming operation (Fig. 14)
- Ensure that the device is unplugged prior to cleaning it.
- This device may only be cleaned with a damp cloth, and chemical products must never be used for the same.
PRODUCT DISPOSAL
- This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead going to the electrical and electronic waste collection center closest to your home.
- The product may contain batteries. Remove them before disposing of the product and dispose in special containers approved for this purpose.
REMOVING BATTERY
- The appliance must be disconnected from the supply mains when removing the battery Ensure that the clipper is discharged of all power First remove the comb. Then remove the blade.
- Unscrew the 2 screws in the blade base of the unit. Unscrew the other screw on the lower back housing of the clipper. Lift or pry the clipper halves apart, exposing the battery.
- Cut the metal pieces on both ends of the battery and remove it from the PCB. Pull downward the battery set from the unit.
- The battery must be removed from the appliance before it is scrapped. The battery is to be disposed of safety.
- We hope that you will be satisfied with this product.
WARRANTY REPORT
- B&B TRENDS, S.L. guarantees compliance of this product for the use for which it is intended for a period of two years. In the case of breakdown during the term of this warranty, users are entitled to repair or else the replacement of the product at no charge if the former is unavailable, unless one of these price or cancellation of the sale, which must be dealt with directly with the sales vendor. This also covers replacement of spare parts provided that the product has been used according to the recommendations authorised by B&B TRENDS, S.L. The warranty will not cover any parts subject to wear and tear.
- This warranty does not affect your rights as a consumer in accordance with the provisions in Directive 1999/44/EC for member states of the European Union.
USE OF WARRANTY
- Customers must contact a B&B TRENDS, S.L. authorized Technical Service for repair of the product. Since any tampering of the same by anyone not authorised by B&B TRENDS, S.L., or the careless or improper use of the same shall render this warranty null and void. The warranty must be fully completed and delivered along with the receipt or delivery docket for the effective exercise of rights under this warranty.
- This warranty should be retained by the user as well as the invoice, receipt or the delivery docket to facilitate the exercise of these rights. For technical service and after-sales care outside the Polish territory, please submit your query to the point of sale where you purchased the item or check for further aftersales information at www.zelmer.com
Триммер / Тример
- Series: ZMB. Mod: ZMB6000
- Input : 5V 1A
- Type : FK-8688T
- Made in China
- B&B TRENDS, S.L.
- C. Cataluña, 24 · P.I. Ca
- 08130 Santa
- (Barcelona) · SPAIN