amazon basics B071LQD2XD Xbox One Controller Battery Charger Instruction Manual

: June 15, 2024
: amazon basics

Table of Contents

amazon basics B071LQD2XD Xbox One Controller Battery Charger
Product Description
Safety and Compliance
Setting Up The Battery Charger
Setting Up The Rechargeable Battery Pack
FCC Compliance Statement
Disposal
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

amazon basics B071LQD2XD Xbox One Controller Battery Charger

Product Description

A. Battery Charger
B. Rechargeable battery
- Power up to two battery packs simultaneously with dual charging ports
- View charging status at a glance via LED indicators
- The locking mechanism holds battery packs in place
- USB Port with power and data pass-thru
- 100% compatible with standard Xbox One controllers
- Fully UL-certified battery cells

Safety and Compliance

Incorrect battery use may result in battery leakage, overheating, or explosion. When using batteries, make sure that you follow these instructions:

Keep batteries out of the reach of children.
Do not heat, open, puncture, mutilate, or dispose of batteries in fire.
If a battery leaks, remove the battery, taking care to keep the leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush the skin with water or remove the clothing immediately. Before inserting a new battery, thoroughly clean the controller with a damp paper towel.
Do not allow metal objects to touch the battery terminals, because they can become hot and cause burns. For example, do not carry the battery in a pocket with keys or coins.
Remove the battery when the product will not be used for an extended period.

Setting Up The Battery Charger

Step 1: Plug the rechargeable battery pack into the Battery charger. Orient the battery packs with the lighter stripe facing the locking switch. The end with the contacts goes in first. The battery packs automatically lock in when fully seated.
Step 2: Plug the Battery charger into one of the open USB ports on the Xbox One console.
Step 2a:
Step 3: When the battery pack is fully charged, pull the locking switch to the left to unlock. The battery automatically pops out.

Setting Up The Rechargeable Battery Pack

Open the battery cover and insert the rechargeable battery pack into the battery compartment as shown below. The contacts should be facing left and the darker stripe should be facing outward. Close the battery cover.

FCC Compliance Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / 1V technician for help.

Canada IC Notice

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
This Class B digital apparatus complies with the Canadian CAN ICES-3(8) / NMB-3(8) standard.

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing reuse and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed of separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers to conserve natural resources. Each country should have its own collection centers for electrical and electronic equipment recycling. For information about your recycling drop-off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Battery Disposal
Do not dispose of used batteries with your household waste. Take them to an appropriate disposal/collection site.

Specifications

External dimensions charge station (WxHxD): Approx. 3.14 x 2.75 x 2.51 in (S x 7 x 6.4 cm)
Battery capacity: 1200 mAh
Battery type: Ni-MH LSD battery
External dimensions battery (WxHxD): Approx. 1 .96 x 1.18 x 0.59 in (5 x 3 x 1.5 cm)
Operating temperature: 32°F-104 °F (0°C-40°C)

Feedback and Help
Love it? Hate it? Let us know with a customer review.
AmazonBasics is committed to delivering customerdriven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.