ASUS B09H41H5TN ROG Falchion Wireless Mechanical Gaming Keyboard User Guide

: June 15, 2024
: Asus

Table of Contents

Package Contents
Keyboard features
Getting started
Setting up as a wireless keyboard
Battery Status
Key combinations
Safety Guidelines **
Notices
Technical Support
Technical Support
Technical Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASUS B09H41H5TN ROG Falchion Wireless Mechanical Gaming Keyboard User Guide

Package Contents

Keyboard cover
Technical documents
USB Type-C* cable
Wireless dangle extender
USB Wireless Dongle
Sticker
The illustration is for reference only. Actual product specifications may vary with models, such as keyboard layout.
Only use the wireless dongle extender for the wireless dongle.

Keyboard features

**Top view (US layout for reference)

Rear view
Button Function
Left view
**

Win lock indicator /Win lock
RB indicat
Caps Lock
Kickstand
Power switch
USBType-C* port/
Magnetic dongle storage
Up button
Slider bar
Down button

Getting started

Connect the bundled Type-C cable to your keyboard.
Connect your keyboard to the PC.
Download and install the Armoury Crate software from https://www.asus.com/supportonly/Armoury%20Crate/HelpDesk_Download/
Follow the software instructions to update your keyboard’s firmware.
Customize your keyboard using Armoury Crate

Setting up as a wireless keyboard

Remove the wireless dongle from the keyboard.
Insert the wireless dongle to a USB port on the PC.
Set the power switch to ON.

Battery Status

The RGB indicator on your gaming keyboard will turn red (breathing) and the LEDs for all the other keys will switch off when the battery power is below 20% in wireless mode. You may charge your gaming keyboard by using the bundled USB cable.

Key combinations

Media Control

Hot Key	Function
PalyPause
Stop
Previous track
Next track
Mute
Volume down
Volume up

Hardware Reset

Hot Key	Function

| Reset the hardware by following the steps below:1. Connect the keyboard to the PC.2. Hold Fn + CAPS Lock for 3 seconds to reset the hardware (repeat this step again if you released the keys before 3 seconds). The keyboard LED effect should be red, flashing, and strobing.

Function Key

Hot Key	Function
Scroll Lock
Menu
Print screen
End
Home
Backtick (‘)
(enable Shift with Fn)	Tilde (~)

Onthe-fly Macro Recording

Hot Key	Function

| Start recording/Stop recording/Assign key

| Search

To record macros:
Step 1: Fn + Left-ALT to start recording
Step 2: Fn + Left-ALT to end recording
Step 3: Assign Macro Key (Whole keys except for Fn/Caps Lock/ Windows/Left- ALT can be assigned a macro)

Default Profiles

Hot Key	Function

| Profile switch

| Lighting effects switch

| Brightness level Increase / decrease (0/25/50/75/100%)

These hot keys will be disabled if AURA Sync is on.

Function Lock

Function name	Hot Key	On	Off
Slider bar lock		+ Slider bar(TAB key will light up white when On)	Use

Sider bar directly (default)
Windows lock| | Windows key will be locked (Win lock indicator will light up when On)| Windows key can be used
Fn lock| | Swap all function keys (1, 2, 3… =) to F1-F12(Ins key will light up white when On)| Function keys (1, 2, 3… =) remain the same

Ukraine Certification Logo
EAC Certification Logo

RED RF Output table

Function	Frequency	Maximum Output Power (EIRP)
2.4GHz wireless	(2403 – 2480MHz) – Mouse	dBm
(2403 – 2480 MHz) – Dongle	dBm

CE Mark Warning

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

Safety Guidelines **

**

Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down,

Notices

Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.

ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.

This limit also applies to ASUS suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA, OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver,
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment..

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This device has also been evaluated and shown compliant with the ISED RF Exposure limits under portable exposure conditions (antennas are less than 20 cm of a person’s body).

Proper disposal
DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the device in fire. DO NOT short circuit the contacts.
DO NOT disassemble the device.

Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions

ASUS contact information

ASUSTeK COMPUTER INC

Address: 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
Telephone: +886-2-2894-3447
Fax : 886-2-2890-7798
Web site: https://www.asus.com