ikago Smart Mug Warmer and Mug Set Owner’s Manual

ikago Smart Mug Warmer and Mug Set

Heat Coaster Pro
Specifications

• Input voltage: 120V~ 60Hz (US, Canada), 230V~50Hz (UK, EU)
• Rated Power: [insert rated power]
• Size: [insert size]

Safety Information
READ ALL INSTRUCTIONS BEFORE USING. The manufacturer declines any liability for failure to observe these safety instructions or inappropriate use of the appliance or incorrect setting of controls. When using the appliance, basic safety precautions should always be followed, including the following

1. Do not touch hot surfaces.
2. To protect against electrical shock, do not immerse any part of the product in water or other liquid.
3. Do not allow children to use the appliance. Close supervision is necessary when the appliance is used near children.
4. The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they are supervised or given instructions by a person responsible for their safety.
5. Do not operate with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
6. Do not hang the power cord over the edge of a table or near hot surfaces.
7. Do not drop or subject the appliance to strong shocks or vibration.
8. The probe window is the most delicate part of the appliance. For accurate measurement keep it away from smoke, droplets, and other dirt that may adhere to the window.
9. The appliance heats when its infrared (IR) detectors detect objects in the heating area. Do not place foreign objects in the heating area to avoid false heating.

FCC Compliance Statement

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Important

1. Some glass cups cannot be recognized by the IR detectors due to their thick bottoms or high IR emissivity of the material (e.g. quartz).
2. Cups made of paper, plastics, Styrofoam, etc. are not recommended to use for safety reasons. Find more information on what cups to use, see the section Hints and Tips.
3. If a cup is not recognized when placed in the heating area, please try moving it slightly.

Package Contents

• [insert package contents]

FAQ

1. Q: Can I use this product with a glass cup?
   A: Some glass cups cannot be recognized by the IR detectors due to their thick bottoms or high IR emissivity of the material (e.g. quartz). It is recommended to use cups that are compatible with the product’s IR detectors.

2. Q: Can I use cups made of paper, plastics, or Styrofoam with this product?
   A: Cups made of paper, plastics, Styrofoam, etc. are not recommended to use for safety reasons. Please refer to the section Hints and Tips for more information on what cups to use.

3. Q: What should I do if a cup is not recognized when placed in the heating area?
   A: If a cup is not recognized when placed in the heating area, please try moving it slightly to ensure proper detection by the IR sensors.

SAFETY INFORMATION

READ ALL INSTRUCTIONS BEFORE USING.
The manufacturer declines any liability for failure to observe these safety instructions or inappropriate use of the appliance or incorrect setting of controls. When using the appliance, basic safety precautions should always be followed, including the following:

1. Do not touch hot surfaces.To protect against electrical shock, do not immerse any part of the product in water or other liquid.
2. Do not allow children to use the appliance. Close supervision is necessary when the appliance is used near children.
3. The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they are supervised or given instructions by a person responsible for their safety.
4. Do not operate with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
5. Do not hang the power cord over the edge of a table or near hot surfaces.
6. Do not drop or subject the appliance to strong shocks or vibration.
7. The probe window is the most delicate part of the appliance. For accurate measurement keep it away from smoke, droplets, and other dirt that may adhere to the window.
8. The appliance heats when its infrared (IR) detectors detect objects in the heating area. Do not place foreign objects in the heating area to avoid false heating.

FCC compliance statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT

1. Some glass cups cannot be recognized by the IR detectors due to their thick bottoms or high IR emissivity of the material (e.g. quartz).
2. Cups made of paper, plastics, Styrofoam, etc. are not recommended to use for safety reasons. Find more information on what cups to use, see the section Hints and Tips.
3. If a cup is not recognized when placed in the heating area, please try moving it slightly.

PACKAGE CONTENTS

• Heat Coaster Pro × 1
• Owner’s Guide × 1 (ikago Coffee Mug + Lid + Coffee Spoon × 1)

SPECIFICATIONS

1. Power Button
2. Thermostat Buttons
3. Display Panel
4. Probe Window
5. IR Receiver
6. IR Emitter
7. Heating Area
8. Cord and Plug

Display Panel

• A Real-time Temperature
• B Status Bar
• C Set Temperature
• D Cup Recognition Indicator

OPERATION

1. Place the ikago Heat Coaster Pro on a flat and level surface.
2. Plug the appliance into a standard household outlet. The screen will show all the lights, with the status bar flashing red, green, and blue. Then it will go out.
3. Press the power button on the side to turn on the appliance. The screen will then display the last  set temperature (150°F / 65°C by default on first use).

Customize the temperature

• Tap the – or + button to decrease or increase the set temperature by 1°F / °C. Press the – or + button to fast backward or forward.
• The ikago Heat Coaster Pro will keep the beverage temperature constant at the set temperature.

Lock and unlock

• The thermostat buttons will be locked if there is no temperature adjustment within 5 seconds. There will be two beeps after they are locked.
• To unlock before customizing the temperature, double tap the – or + button. Then there will be a beep.

Display panel

• Once a mug is detected in the heating area, the current temperature of the beverage and the  heating indicator D will show up.
• The status bar will display the following colors according to the difference between the set beverage temperature and the current tempera-ture:

Conversion between units

• To convert the unit from Fahrenheit to Celsius or vice versa, long press the – and + buttons at the same time for 2 to 3 seconds.

Power off

• When finished, press the power button to turn off the unit. The status bar wB ill be red to indicate a high temperature warning until the heater area cools.

Automatic shut down

• The ikago Heat Coaster Pro will automatically shut down when the IR sensors detect no mug movement for 2 hours or no mug in the heating area for 15 minutes.

HINTS AND TIPS
What may cause less accurate temperature measurements

1. Cups other than ikago Coffee Mug
   The ikago Heat Coaster Pro are calibrated to the ikago Coffee Mugs. Therefore, an ikago Coffee Mug will provide the highest temperature measurement accuracy as well as thermal efficiency.

2. Smoke, droplets, vapors, airflow, etc.
   Small particles will block the probe window and airflow will affect heat dissipation, leading to less accurate temperature measurements.

What cups can I use?

1. We recommend using the ikago coffee mug for the best experience. You can also use other pottery and some glass mugs. (Glasses with thick bottoms or have high IR emissivity, such as those made of quartz, cannot be recognized.)
2. Metal cups are not recommended due to the risk of burning lips and slightly less accurate temperature measurements.
3. Avoid double-wall insulated cups due to the low heat efficiency caused by insulation.
4. For better heating efficiency, use thin cups with flat bottoms.
5. Put a lid on your mug if you would like the beverage heated faster or up to 175 °F (80 °C). For optimal heating, mugs with bottom no more than 3.5 inches (9 cm) in diameter match the heating area perfectly. The coaster can fit cups with a bottom diameter of up to 4.4 inches (11.3 cm).

• S Suitable Size ≤ 3.5 inches (9 cm)
• M Maximum Size = 4.4 inches (11.3 cm)

Safe, smart, and energy-saving heating

1. Only when detecting a mug in the heating area will the ikago Heat Coaster Pro start heating.
2. The ikago Heat Coaster Pro will automatically shut down when the IR sensors detect no mug movement for 2 hours or no mug in the heating area for 15 minutes.
3. The NTC temperature control system plus the aerogel insulation double layer protect against overheating.

Scan the QR code below to

1. Learn more about making better use of ikago Heat Coaster Pro.
2. Solve problems that you encounter .

CARE AND MAINTENANCE

1. Always remember to unplug the appliance and allow the heating area to cool down before cleaning.
2. Wipe the liquid stain on the heating area with a dry cloth. For adhering dirt use a damp cloth before drying the surface with a clean and dry cloth.
3. DO NOT immerse the unit in water for cleaning. When the probe window gets dirty, wipe it lightly with a soft dry cloth or a cotton swab carefully to avoid damaging it. Do not use a paper tissue to clean it.
4. Store the appliance in a cool, dry, and well-ventilated area.

WARRANTY INFORMATION

• ikago guarantees all products of the highest quality in materials, workmanship, and service for a minimum of 2 years from the date of purchase. If you encounter any problems or have any questions about the product, please feel free to contact our customer service team.
• Customer Service
  • Facebook: facebook.com/ikagopro
  • Email: support@ikago.tech

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>