Govee H7170 Smart Electric Kettle User Guide

Govee H7170 Smart Electric Kettle

Getting Started

A Water Test is needed when first used to make sure the kettle is working properly.
Caution: DO NOT drink the water that is boiled during this first test.

1. Remove all packaging from the kettle and its accessories.
   • Step 1: Open the packaging and read the Quick Start Guide.

  *  **Step 2:** Place the packaging upside down and slightly shake it until the protective foam and the included products slide out of it.

  *  **Step 3:** Place the protective foam as shown in the picture (with the flat side facing up). Remove the top part of the foam and take out the product.

2. Place the kettle on a dry, level surface.
3. Open the lid, run water into the kettle until it reaches but not sits higher than the MAX fill line, and then close the lid tightly.
4. Plug the power cord into a polarized 120 V AC wall outlet.
5. Press the ON/OFF button on the control panel to turn on the kettle.
6. When the MODE indicator is flashing, press the MODE button to switch the kettle to BLK/BOIL (212°F). The indicator will then switch to solid to indicate the BOIL status.
7. The kettle will automatically turn off once it finishes boiling. Let the kettle cool for a little while before pouring out the hot water inside, and then rinse out the kettle thoroughly 2 to 3 times with cold water.

Controls

• ON/OFF Button
  Press to turn the kettle on or off. When powered back on, the kettle will restore to the mode, hold temperature, and DIY set previously.

• HOLD Button
  Press to turn the HOLD function on or off to maintain or cancel the temperature mode you have chosen.

• DIY Button
  Press to turn the DIY mode on or off to adjust the temperature as you like. The default temperature of DIY mode is 170°F/ 77°C, which can be adjusted via Govee Home App.

MODE Button

Press to cycle through COFFEE, BLK/BOIL, GREEN, and OOLONG:

• COFFEE (205°F): Sets the kettle to 205°F/ 96°C, the ideal temperature for coffee.

• BLK/BOIL (212°F ): Sets the kettle to 212°F/ 100°C, the ideal temperature for black tea or boiled water.

• GREEN (180°F): Sets the kettle to 180°F/ 82°C, the ideal temperature for green tea.

• OOLONG (195°F): Sets the kettle to 195°F/ 91°C, the ideal temperature for oolong tea.
  Note:

  • The MODE set during last use will still be active when the kettle is powered back on.
  • Press both DIY and MODE buttons and hold for 5 seconds to restore to factory settings.

Govee Home App

You can access more features using Govee Home App.

Downloading Govee Home App
To download Govee Home App, scan the QR code or search for “Govee” in the Apple App Store® (iOS) or Google Play Store (Android).

Note:

• Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These permissions allow the app’s features to function normally and are not used to record personal, private information.
• Due to ongoing updates, Govee Home App may be slightly different than shown in this manual. In case of any differences, always follow the in-app instructions.

Pairing with Govee Home App

1. Turn on your smartphone’s Bluetooth.
2. Open Govee Home App, touch the “+” icon in the top right corner and search for “H7170.”
3. Touch the device icon and follow the in-app instructions to touch the Power Button to complete pairing.

Note:

• Method to turn off Bluetooth and Wi-Fi connection: press and hold the ON/OFF Button and MODE Button for 5 seconds to restore the device to factory settings. For the next device connection, please make sure to delete the device on the app.
• You can use Govee Home App to connect your kettle to Amazon Alexa or Google Assistant. Follow the in-app instructions to connect to each voice assistant.
• Govee Home App is being continually updated and its features expanded.
  For FAQs and more information, please visit: www.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>