HIKVISION 4K 8MP PTZ PoE IP Dome Camera Instruction Manual
- May 16, 2024
- Hikvision
Table of Contents
HIKVISION 4K 8MP PTZ PoE IP Dome Camera
Product Information
Specifications
- Product: PG Camera
- Compatibility: Dahua NVR
- IP Address Range: 10.1.1.2 – 10.1.1.254
- Gateway IP: 10.1.1.1
- Manufacturer: Onvif
- Password: 123456
Product Usage Instructions
-
Step 1: Connect the camera to the NVR
Download and install the AjDev Tools from http://ourdownload.store/. -
Step 2: Query the IP address of the camera through the search tool
Use the search tool provided to find the IP address of the camera. -
Step 3: Modify the camera IP address
Select the camera IP address and click on “IP Batch Setting” – “IP Batch Manual Setting”. Modify the IP address to be an address between 10.1.1.2 and 10.1.1.254. Set the gateway IP to 10.1.1.1 and click OK to apply the changes. -
Step 4: Log in to the GUI interface of the NVR
Click on “Camera” and then “Camera List”. Click on “Manual Add”. -
Step 5: Add the camera to the NVR
Select “Manufacturer” as “Onvif”. Enter the camera IP as 10.1.1.2 and the password as 123456. Click OK to complete the camera addition. -
Step 6: Verify successful addition
The display status should be green, indicating that the camera addition was successful.
FAQ
-
Q: How can I find the IP address of the camera?
A: Use the search tool provided to query the IP address of the camera. -
Q: What should I do if the camera addition fails?
A: Ensure that the camera IP address is within the specified range (10.1.1.2 – 10.1.1.254) and that the gateway IP is set to 10.1.1.1. Double-check the password and manufacturer settings as well.
PG camera connected to Dahua NVR
- Step 1: Connect the camera to the NVR Download and install “AjDev Tools”； Download:http://ourdownload.store/
- Step 2：Query the IP address of the camera through the search tool；
- Step 3：Modify camera IP address.
- Select camera IP address；
- Click“IP Batch Setting – IP Batch Manual Setting”；
- Modify the IP address to be an address between 10.1.1.2—10.1.1.254 and the gateway is set to 10.1.1.1；
- Click “OK” to apply；
- Step 4：Log in to the GUI interface of the NVR -Click “Camera –Camera list–Click Manual Add”.
- Step 5：
- Manufacturer (Choose Onvif)
- IP Address （Camera IP：10.1.1.2）
- Password ：123456
- OK–Complete the camera addition
- Step 6：The display status is green, indicating that the addition is successful
