dyson Purifier Big Quiet Formaldehyde User Guide
- June 15, 2024
- dyson
Table of Contents
- Getting Started
- Assembling Your Machine
- Positioning Your Machine
- Connecting to the MyDyson™ app
- Connecting to your smart home
- Power on/off
- **Continuous monitoring
- Information menu
- Auto purity
- Set airflow speed and direction
- Night mode and Sleep timer
- Changing your HEPA filter
- Reset Your HEPA filter life
- Changing your carbon filter
- **Reset your carbon filter life
- Looking after your machine
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Purifier big+quiet formaldehyde
User guide
Dyson purifier big+quiet formaldehyde logo
The Dyson purifier big+quiet formaldehyde. Power button onan LCD screen, mesh filter cover and integrated sensor system on the side.
Getting Started
Assembling Your Machine
Use both hands to lift your machine out of the box, by its base.
Your machine comes with a HEPA filter, carbon filter and permanent cotolytic
filter. These ore already installed in your machine.
Lift the conic amplifier out of the box and place it on the top of your
machine.
Rotate the conic amplifier until it clicks securely into place.
Plug in and press the power button on the screen or remote control.
Image demonstrates how to assemble the Dyson purifier big + quiet
formaldehyde’s conic emplifier. Position and twist. A dick indicctes a secure
lock.
Place the remote control on the front of your machine with the buttons facing
down.
The image demonstrates the location ef the standby duttan and remote control.
Positioning Your Machine
Your machine is fitted with wheels to make it easier to move.
Position your machine on a level floor.
For the most effective purification, position your machine on the edge of the
room at least 1 metre from the wall, with the conic amplifier pointing to the
furthest point, along the wall.
You can also position your machine facing diagonally across the room.
The purifier positioned on the edge of a room. A blue arrow shows the conic amplifier direction, pointing to furthest point, along the wall.
The purifier positioned on the edge of a room. A blue arrow shows the conic amplifier direction, pointing diagonally across the room.
Connecting to the MyDyson™ app
Take full control with the MyDyson™ app and access step-by-step setup and
support, control how and when your Dyson air purifier operates, monitor air
quality with visual updates and automatically keep up to date with the latest
software updates.
Download the MyDyson™ app from the App Store or Google Play.
Open the app and follow the on-screen instructions to create a new account.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other
countries.
Google Play and the Google Play logo are trademarks of Google Inc.
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.
Connecting to your smart home
Using Amazon Alexa
Ask Alexa to enable the Dyson skill – to help control your air purifier.
Set a routine that automates how your machine works with other devices in your
home.
Using Google Assistant
Control all of your connected purifiers with Google or set a routine to
automate how your machine works with other devices in your home.
Just say “Hey Google” to get started.
Using Siri
Connect your Dyson machine to Siri Shortcuts to control it by voice on your
Apple device.
Power on/off
Press the Stand-by on/off button on your Dyson air purifier or remote control to start/stop your machine. It will continue to monitor the air quality.
The remote control with the Stand-by button on the top left.
**Continuous monitoring
**
Continuous monitoring is turned off by default. You’ll need to activate it to
see your historic AQ data.
With continuous monitoring active, your Dyson air purifier will gather air
quality and temperature information, displaying it on the LCD screen and in
the MyDyson™ app.
Continuous monitoring on/off
You’ll be prompted to activate Continuous monitoring on the MyDyson™ app.
To turn if on or off using the remote control, press and hold the Auto mode
button for five seconds. The LCD screen will indicate the Continuous
monitoring status.
Wi-Fi connectivity
Wi-Fi is turned on by default. To turn the Wi-Fi on or off, press and hold the
Stand-by on/off button on your machine for five seconds.
Information menu
Press this button to scroll through information monitored by your Dyson air
purifier.
Information about air quality, temperature, humidity and filter levels is
shown on the LCD screen.
When a particular type of pollutant causes air quality to decrease, a symbol
for the pollutant will show on the LCD screen.
The remote control with the information button highlighted on the right hand side.
| Indoor air quality
Air quality graph shows the last 12 seconds of data.
---|---
| Particulate matter (PM10)
Larger microscopic particles up to 10 microns in size, suspended in the air we
breathe.
These include dust, mould and pollen.
| Nitrogen dioxide and other oxidising gases
Potentially harmful gases released into the air by combustion from cooking and
vehicle exhaust emissions.
| Indoor humidity
The amount of water vapour in the air, shown as a percentage.
| Formaldehyde (HCHO)
A common indoor pollutant released for many years from furnishings, floorings
and glue.
| Carbon dioxide (CO₂)
CO₂ can build up indoors without adequate ventilation, which can impact
cognitive function.
| Particulate matter (PM2.5)
Microscopic particles up to 2.5 microns in size, suspended in the air we
breathe. These include smoke, bacteria and allergens.
| Volatile organic compounds
VOCs are potentially harmful odours found in cleaning products, paints and
furnishings.
| Indoor temperature
Monitor the ambient temperature of the room.
| Filters
Remaining filter life on LCD screen indicates when filters need replacing.
| Wi-Fi
The current status of connection to the Wi-Fi network.
Auto purity
Set your air purifier to Auto mode and the on-board sensors will intelligently
adjust the settings of the machine according to the air quality.
Air quality: your machine will pause when the target air quality has been
reached, switching on again when the air quality levels drop.
Airflow speed: the airflow speed will increase to its maximum until the target
air quality has been reached.
The remote control with the Auto mode button highlighted on the left hand side.
Set airflow speed and direction
Increase or decrease the airflow speed and change air direction from 0° to 50°
using the remote or MyDyson”™ app.
Select Breeze mode by repeatedly pressing down on the airflow direction button
until it activates or by using the MyDyson™ app.
Night mode and Sleep timer
In Night mode, your Dyson air purifier will continue to clean the air quietly,
in a lower airflow speed with its LCD screen dimmed.
Press the Night mode and Sleep timer button to scroll through the timer
options.
The remote control with the Night mode button on the bottom right and Sleep timer button on the bottom left.
Changing your HEPA filter
The MyDyson™ app and the LCD screen will alert you when your filter life is
running low. Replacement filters are available to buy on
https://www.dyson.hk/en-HK
Remove the conic amplifier
Slide the Release button on the back of the conic amplifier to unlock.
Lift the conic amplifier off your machine.
Lift the outer cover off the base of your machine.
Remove the filter
The HEPA filter is located in the outer cover. Press the filter release
buttons located on the inner rim and lift the outer cover off the filter.
Dispose of the filter.
Install a new filter
Remove your replacement filter from any packaging. Place the filter on the
base of your machine.
Place the outer cover over the filter and press down until it clicks securely
into position.
Place the conic amplifier on your machine and rotate until it clicks securely
in position.
Plug in, switch on and reset your filter life.
Reset Your HEPA filter life
It’s important to reset the filter life after replacing your filter.
Press and hold the Night mode button on the remote control.
The LCD screen on your machine will count down from five, until a tick appears
on the screen.
The filter life has been reset and your machine is ready to use.
Changing your carbon filter
The MyDyson™ app and the LCD screen will alert you when your filter life is
running low. Replacements are available to buy on https://www.dyson.hk/en-
HK
Remove the conic amplifier
Slide the Release button on the back of the conic amplifier to unlock.
Lift the conic amplifier off your machine.
Lift the outer cover off the base of your machine.
Remove the filter
The carbon filter is wrapped around the central body of your machine.
Pull each of the four clips towards you to release the filter.
Dispose of the filter.
Install a new filter
Remove your replacement filter from any packaging.
Wrap the filter around the base of your machine, fit the clips in position and
push each one to secure the filter.
Place the outer cover and HEPA filter back in position on the base of your
machine.
Place the conic amplifier on your machine and rotate until it clicks securely
in position.
Plug in and switch on, and reset your filter life.
**Reset your carbon filter life
**
It’s important to reset your filter life after you have replaced your filter.
Press and hold the down airflow direction button on the remote control.
The LCD screen on your machine will count down from five, until a tick appears
on the screen.
The filter life has been reset and your machine is ready to use.
Looking after your machine
To always get the best performance from your Dyson air purifier, it’s
important to regularly clean it and check for blockages.
Cleaning your machine
If your machine is dusty, wipe with damp, lint-free cloth.
Check the sensor inlets on the left hand side of the conic amplifier for dust
and debris.
Look for dust and debris in the outer cover and in the conic amplifier.
Use a soft brush to remove dust and debris.
Don’t use detergents or polishes to clean your machine.
Eye icons identify where a user should regularly check for dust and debris, in outer cover and conic amplifier. Use a soft brush on the areas highlighted to clean the purifier.