Vocevos Table Lamp with Speaker User Manual

Vocevos Table Lamp with Speaker

Installation Instructions

1. Install the lampshade on the lamp base
2. Lock the lamp cap nut
3. Install the bulb into the base
   • (Don’t tighten the bulb too hard, or the bulb will be poorly contacted, just feel slight resistance)

Introduction of keys

Touch switch :
Touch to turn on,hold on to touch to turn off

1. Power key: function mode
2. Time set/Bluetooth playback pause
3. – key
4. + key
5. VOL – key
6. VOL + key

Product Function Introduction

1. Touch switch: three levels of brightness (low, medium and high) can be adjusted
2. Dual alarm clocks : three alarm times available (Mon to Fri, Sat to Sun, Mon to Sun)
3. Bluetooth supported: connected with playback devices
4. Dual output port: USB A + USB C
5. LED display: two levels of brightness (Exit Bluetooth mode, hold on to press to adjust)
6. Twelve-hour clock (AM/PM): automatically calibrates the time when Bluetooth connected

Specification

• Lamp Wattage : 120V/21W
• Bulb Wattage: 120V/6W
• Voltage Output: 5V-2.1A(USB A, USB C)
• Color Temperature : 2700K
• Bluetooth Name: CA0503BT
• Bluetooth Connection Distance: 10M/33FT

Packing list

• Bulb x1
• Lampshade x1
• Lamp body x1
• Lamp cap nut x 1
• Instruction x1

Warm Tips

• Before you set the clock and alarm clock, pls press to exit Bluetooth mode.
• When the alarm clock rings, Bluetooth will exit automatically, pls connect again after the alarm clock ends.
• When the table lamp is unplugged or power cut, it will factory reset, pls set it again.
• In the uninterrupted power system, cancel and restart the alarm clock, the alarm time set before will be kept.
• Any questions about the lamp or manual, pls contact us, we will surely help with videos and more details.

Bluetooth Setting

• Enter Mode: Press ( ) to enter Bluetooth mode, “BT” will flash on the display screen, there will be a voice prompt after connecting CA0503BT
• Function Selection: Press to play/pause music,press to play the last song,press to play the next song
• Vol Setting: Press or hold on to press to reduce vol, press or hold on to press to increase vol

Clock Setting

Pls press( ) to exit Bluetooth mode before set clock time, “BT” off

• Enter Mode : Hold on to press , enter the time set mode
• Manual Setting: Press to adjust the hour, press to adjust minute, wait for the digitals to stop flashing, and save automatically
• Auto Setting: Time will be automatically synchronized when Bluetooth is connected
  ( PS : Time automatically updates with the iOS system; Time can be only updated after the information is authorized with the Android system)

**Alarm Clock Setting

**

AL 1 Setting Pls press ( ) to exit Bluetooth mode before setting AL 1, “BT” off)

• AL1 State : Press to turn on or turn off AL 1, AL 1 state shows on the display screen
• Enter Mode : Hold on to press until the digitals flash to enter the AL 1 setting.
• Setting Steps: Press to adjust the hour, press to adjust minute➔  to enter AL 1 time selection, press or to select AL 1 time( 1-5, 6-7, 1-7) ➔ wait for the digitals to stop flashing, save automatically (default ringtone, the volume will gradually increase )
• Turn Off : Press or ( ) to turn off when AL 1 rings

AL2 Setting Pls press to exit Bluetooth mode before setting AL2, “BT” off)

• AL2 State : Press to turn on or turn off AL2, AL2 state shows on the display screen.
• Enter Mode: Hold on to press until the digitals flash to enter the AL2 setting.
• Setting Steps : Press to adjust the hour, press to adjust minute➔ to enter AL2 time selection, press or to select AL2 time(1-5, 6-7, 1-7) ➔ wait until the digitals stop flashing, save automatically (default ringtone, the volume will gradually increase)
• Turn Off: Press or ( ) to turn off when AL2 rings

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>