Chicco Baby Monitor Video Deluxe User Manual

BABY MONITOR VIDE
DELUXE

Baby Monitor Video Deluxe

PACK CONTENTS

• 1 baby unit
• 1 parent unit
• 2 switching mains adapters 100-240V~ 50/60Hz / 5Vdc, 1A
• 1 instruction manual

GENERAL WARNINGS

• The Deluxe Video Baby Monitor should not be used as a medical monitor and is not intended to replace the supervision of children by adults; it is only designed to help monitor them. Any other use is to be considered improper.
• Do not leave any packaging materials (plastic bags, cardboard boxes, etc.) within the reach of children as these can be hazardous.
• Before using the device, make sure that there is no damage to the product or its components. If it is damaged, do not use the product and contact a qualified technician or your dealer.
• Contact Artsana S.p.A. Customer Services rather than trying to repair the product yourself.
• Do not open the devices. The baby unit, parent unit and mains adapters do not contain any user-serviceable parts. Contact skilled technical personnel or the Artsana S.p.A. Customer Service in the event of failure. Opening the above-mentioned devices can cause electric shock.
• Place the baby unit and parent unit out of the reach of the child on a flat, level surface.
• Keep the baby unit, parent unit and AC/DC mains adapters out of reach of children (mains adapter cords may cause strangulation).
• It is important to regularly check the proper functioning of the baby unit and the parent unit, particularly before each use, checking that the signal is received in the area at the maximum operating distance.
• The maximum operating distance is around 220 metres in an open space without obstacles (this range may be considerably reduced indoors due to the specific environmental situation, the layout of walls and furniture, the presence of metal structures, electromagnetic fields/ disturbances of internal or external origin, reinforced concrete walls, when rooms are located on different floors or because the batteries are not fully charged etc.).
• Do not use the baby unit, parent unit, rechargeable batteries and adapters in places exposed to the weather (rain, sun, etc.). If the product is used outdoors, the parent unit must be powered by the rechargeable batteries only: the mains adapters supplied with the product are not suitable for outdoor use.
• To avoid the risk of overheating, keep the baby unit, parent unit and especially the AC/DC mains adapters away from sources of heat, such as radiators, stoves, heaters, windows exposed to sunlight, etc.
• Never use (especially if connected to the mains with the mains adapters) the two units close to areas or situations where water can be found, such as bathtubs, washing machines, kitchen sinks or wet surfaces. Do not immerse in water or let product become wet. Do not use the unit and adapters if they have fallen in water. In this case, contact expert technical personnel.
• Position the baby unit, parent unit and AC/DC mains adapters in such a way as to ensure they are adequately ventilated to avoid the risk of the components overheating.
• Do not use this product near fluorescent lamps (Neon) or other electrical appliances such as televisions, motors, personal computers, cordless telephones, radios, microwave ovens, etc. Doing so could interfere with its operation.
• Only use the AC/DC mains adapters supplied with the product or an identical type with the same electrical characteristics. Use of other adapters could damage the baby unit and/or parent unit and cause danger to the user.
• Do not use a mains adapter different from the one supplied with this Artsana S.p.A. product as doing so renders the product non-compliant with the technical specifications established by the relevant EC directives, compromising its safety and integrity. Contact the retailer or Artsana S.p.A. to replace.
• Ensure that the AC/DC mains adapter voltage (see data plate located on the AC/DC mains adapters) matches that of the mains electricity and that the mains adapter plug is compatible with your electrical system sockets.
• Connect the AC/DC mains adapters to easily accessible power sockets that are out of reach of children. Position the AC/DC mains adapter cords so as to prevent the cord from being stood on, from getting caught in items placed upon or against them, and from being accessible to the child and therefore constituting a hazard (tripping, choking).
• The AC/DC mains adapters, baby unit and parent unit may be become hot to the touch when in use. This is normal.
• Periodically inspect the mains adapters (1). If the power cord or plastic parts show signs of damage, do not use them and contact a qualified technician.
• Do not leave the mains adapters (1) plugged into the electrical socket when devices are not in use and/or not connected to the mains adapters (1).
• The adapter power cord cannot be replaced and, therefore, in case of damage, do not continue to use the mains adapter but replace it with an identical type adapter.
• The baby unit has a photosensitive sensor that automatically activates the infrared LEDs in the event of a reduction in environmental light or darkness, to ensure good vision also in poor light. As the infrared LEDs on the baby unit do not emit visible light, check they are working correctly by controlling the image transmitted by the camera to the parent unit when the baby unit is located in a poorly-lit room. The infrared LEDs on the baby unit are not harmful to human health.
• Warning! Risk of explosion if the battery is replaced with one of the wrong type.

SAFETY / WARNINGS

WARNING! Read the instructions
WARNING! It is not advisable to look directly at infrared radiation along the emission axis with either the naked eye or using optical devices.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE PROTECTION OR ATTEMPT TO OPEN MAINS ADAPTERS.
DO NOT WET MAINS ADAPTERS, THE BABY UNIT OR PARENT UNIT. DO NOT EXPOSE TO HUMIDITY OR ATTEMPT TO OPEN THEM. THIS MAY BE A SOURCE OF DANGER AND SHALL VOID THE WARRANTY.
WARNING: the transmitter, the mains adapter and its power cord must be kept out of reach of children.
WARNING: when the lullabies play it may be difficult to hear the sounds made by your child over the tunes. In this event it is advisable to check the parent unit more attentively.
WARNING: when night vision is active the colours of the images will be impaired, and in the event of darkness the images will be seen in black and white. This is normal.
WARNING: when using the ‘Talk to me’ function do not get too close to the parent unit microphone when speaking as the sounds heard by your child may be excessively loud.
WARNING: do not press the button ‘Talk to me’ when the two units are in the same room or within 3 metres of each other as this may generate noises or rustling sounds.
WARNING: the performance of the product may be compromised if multiple monitoring devices are used at the same time.
WARNING: If the volume of the parent unit is deactivated and the display is also manually deactivated afterwards, the volume of the parent unit’s speaker will automatically be set to level 1 to ensure that the user has continuous and safe control of their child.
WARNING: By adjusting or turning off the volume of the parent unit’s speaker, the acoustic alarms will also be adjusted or deactivated. In this case, it is recommended to pay more attention to the parent unit.
WARNING: Disposal of a battery into fire or a hot over, or mechanically crushing or cutting of a battery, can result in an explosion.
WARNING: Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
WARNING:
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
WARNING: The battery shall not be exposed to excessive heat such as sunshine fire or the like.
WARNING!
After switching the parent unit on, always make sure that the baby unit is on.
After switching on the unit always check that it is possible to receive the signal transmitted at the distance and/or in the areas you have set up the devices. With the help of a relative it is advisable to carry out a transmission test from the room in which the baby unit is located, at the same time moving around with the parent unit in the chosen areas in order to check that the signal is being correctly received.
1 CONFIGURATION AND FEATURES
1.1 Baby Unit
External power supply: via 100-240V~50/60Hz / 5VDC, 1A switching mains adapter.
Transmission:Transmission frequency band: 2412~2469MHz. Signal strength: < 19dBm

1. 100-240V~50/60Hz / 5VDC, 1A switching mains adapter.
2. Power indicator light: a) steady green: the baby unit is on; b) OFF: the baby unit is off.
3. Power connector
4. Camera
5. Infrared lighting system
6. Photosensitive sensor
7. Microphone
8. Pairing button
9. Speaker
10. Temperature sensor

11.2 Parent unit
Power supply
External: via 100-240V~50/60Hz / 5VDC, 1A switching mains adapter.
Internal: 3.7V 2000mAh lithium battery, non-replaceable
Reception: Transmission frequency band: 2412~2469MHz. Signal strength: <19 dBm

1. 100-240V~50/60Hz / 5VDC, 1A switching mains adapter.

2. On/Off button

3. Power indicator light:
   a) steady green: the parent unit is on
   b) flashing green: the battery is low
   c) OFF: the parent unit is switched off.

4. Charge indicator light:
   a) steady green: the parent unit is charged
   b) Steady red light: the parent unit battery is charging; OFF: the power adapter (1) is not connected.

5. Light bar to display the sounds made by the child:
   indicator lights 5a and 5b gradually turn green and indicator lights 5.c and 5.d turn red as the intensity of the sounds made by the child varies, allowing parents to monitor the sounds even when the parent unit speaker is deactivated.

6. Power and/or charging connector of the rechargeable battery

7. Speaker

8. Microphone

9. 4.3” colour display

10. Setting/browsing buttons

11. Menu access and setting confirmation key

12. Menu exit and “ Talk to me” key

13. Digital zoom key

14. RESET key

15. Base
    Non-replaceable rechargeable lithium battery

OPERATION

2.1 UNIT POSITIONING:
The Baby unit must be positioned around 1 – 1.5 metres from the child, on a flat, level surface, making sure that the camera is pointing towards the child. The parent unit should be placed at least 3 metres from the baby unit, possibly not in the same room, to avoid annoying whistling or rustling.
2.2 BABY UNIT ON/OFF
Insert the mains adapter plug (1) in to the power connector on the back of the unit (3). Insert the mains adapter plug in an easily accessible power socket. The baby unit will turn on automatically and the power indicator (2) will have a steady green light. To turn off the baby unit and power indicator (2), remove the power adapter plug (1) from the power connector (3) and pull the plug from the power socket.
2.3 PARENT UNIT ON/OFF AND CHARGING
Press the ON/OFF button (2) for about 3 seconds to turn the parent unit on/off. Power indicator (3) will have a steady green light. To charge the rechargeable battery (16), insert the plug of the power adapter (1) into the power connector (4) on the side of the unit and insert the plug of the power adapter (1) into an easily accessible power socket. Check that the charging indicator (4) has a steady red light and that the icon with the moving bars is shown on the display (9). When charging is complete, the charging indicator (4) turns steady green and the icon on the display (9) is steady. For quicker results, charge the batteries by connecting the off parent unit. The parent unit can still be used while the batteries are charging, but it will take longer for them to fully charge.
WARNING. The battery should only be charged using the supplied mains adapter.
For more details on the operation of the product, please refer to the full version of the manual on the Chicco website: www.chicco.com. For more details on the operation of the product, refer to the full version of the manual by scanning the QR code on the product box.
2.4 AUTOMATIC NIGHT VISION
In the event of reduced light or darkness in the room in which the baby unit is positioned, the photosensitive sensor (6) automatically activates the infrared lighting system (5) so it is also possible to see in poor light. The icon appears on the display setting bar (9)
2.5 DEACTIVATING THE DISPLAY
To save energy, you can switch off the image on the display (9) by pressing the on/off button (2) on the parent unit once. To reactivate the display (9), press the button again.
2.6 ADJUSTING THE VOLUME ON THE PARENT UNIT
Press the (10) keys to increase or decrease the speaker (7) volume by one level. The screen (A) appears on the display (9) and on the settings bar the volume icon will change to show the chosen level. At minimum level, the speaker turns off and the icon (icon with cross) is displayed. 5 volumes levels are available.
2.7 ADJUSTING THE BRIGHTNESS OF THE DISPLAY
Press the (10) keys to increase or decrease the brightness of the display (9) by one level. The screen (B) appears on the display (9). 5 levels of light are available.
2.8 2X DIGITAL ZOOM
To activate the zoom, press the zoom key (13) once. The icon appears on the display (9). In this set-up, to move up, down, right or left within the field of vision, press keys (10). To restore the initial image size, press the zoom key (13) again.
2.9 RESET
If the parent unit is locked, normal product operation can be restored by pressing the reset key (14) on the back of the unit with a pointed tool. If necessary, press the on/off button (2) to turn the unit on again.
2.10 ‘TALK TO ME’ FUNCTION
By holding down the button (12) it is possible to use the parent unit microphone (8) to speak to your child. To finish speaking release the button (12). When this function is active it is not possible to hear the sounds coming from the baby unit through the parent unit and the icon is displayed.
2.11 FUNCTION SETTING MENU
To access the main menu, press the menu access and settings confirmation key (11). The screen (C) will be displayed. To browse through the menu, press keys (10). To confirm the settings, press the menu access and settings confirmation key (11). To exit the menu, press the menu exit key (12) once or wait about 30 seconds. The following functions can be set from the main menu (C):
2.11.1 PAIRING
If the baby unit and the parent unit are consistently unable to communicate, even when just a few centimetres from each other, it is advisable to initiate the pairing procedure, which is performed by the manufacturer by default. Selecting the function from the main menu (C) will open the screen (D), where, by selecting the camera icon, the screen (E) will open. Press the baby unit pairing button (8) down within around 30 seconds. If the procedure concludes successfully, the screen (F) and then real-time video will appear on the display; if not, the screen (G) and the absence/loss of signal screen will appear (H). If necessary repeat procedure.
2.11.2 VOICE ACTIVATION
The parent unit can function in continuous transmission mode or Voice Activation mode. To save energy, you can set the Voice Activation function by selecting the function from the main menu (C). In the screen (I) choose one of the three microphone sensitivity levels (7) of the baby unit. One of the icons will appear on the settings bar. When voice activation is set, if the intensity of the sounds detected by the baby unit’s microphone (7) is below the preset threshold of the selected level, the parent unit goes into stand-by mode, automatically deactivating the display (9) and speaker (7). The latter will be reactivated if the baby unit detects sounds above the preset threshold of the selected level. Selecting OFF deactivates the voice activation function and restores continuous transmission. : Low sensitivity : Medium sensitivity : High sensitivity
2.11.3 REMINDER FUNCTION
By selecting the function from the main menu ( ), you can set an alarm in the screen ( ) as a reminder to take care of your child (from 1 hour and 30 minutes to 3 hours and 30 minutes). Once the setting is done, the icon will appear on the settings bar and the icon with the timer will appear on the display (9). diabetes management.
2.11.4 LULLABY FUNCTION
Two lullabies and three relaxing sounds are available for your child. Selecting the function from the main menu ( ) displays the screens (M and N) where you can choose which lullabies and sounds to activate cyclically. From the same screens you can set the playback of a single lullaby or all the lullabies in sequence. To play back the tunes, select their duration (from 15 to 90 minutes). When the selected time runs out, the tunes will automatically switch off.
2.11.5 TEMPERATURE ALARM SETTING
Selecting the function from the main menu ( ) displays the screen (O) where you can set the ideal temperature range, the unit of measurement and choose to receive an acoustic alarm if the temperature in the child’s room falls below or rises above the set range.
2.11.6 FACTORY SETTINGS
Selecting the function from the main menu ( ) displays the screen ( ) where you can return to the factory settings by selecting ,

• Parent unit volume: Level 3
• Brightness: Level 3
• Voice activation: off
• Alarms: off
• Unit of measurement of temperature: °C
• Upper temperature limit: 40°C
• Lower temperature limit: 0°C
• Zoom: 1x
• Lullabies: off

2.12 ACOUSTIC ALARMS
2.12.1 Alarm indicating the absence or loss of the link with baby unit:
Every time the link with the baby unit is absent or lost an acoustic alarm will be heard on the parent unit, the screen (H) is displayed. When the link with the baby unit has been restored, the alarm is deactivated, the icon appears on the settings bar and the regular audio and video signal are restored in real time.
2.12.2 Rechargeable batteries almost at alarm:
When the rechargeable battery (16) is low, an acoustic alarm sounds, the power indicator light ( ) flashes green and the low battery icon appears in red on the display ( ). If you wish to continue using the parent unit, it is recommended to charge the battery ( ), otherwise the unit will stop working optimally and will switch off. Charge the rechargeable battery ( ). When charging starts, the alarm is deactivated and the icon with the moving bars is displayed.
2.12.3 Reminder alarm:
When the set reminder expires, an acoustic alarm is heard and the icon appears on the display ( ). To deactivate the alarm, press any key.
2.12.4 Temperature alarm:
If the temperature in the child’s room falls below or rises above the set range, an acoustic alarm sounds and the icon appears on the display ( ). To deactivate the alarm, press any key.

TECHNICAL DATA

• Audio/video transmission via FHSS digital technology system.
• Outdoor operating range of 220 metres without obstacles.
  The maximum operating range is about 220 metres in an open space with no obstacles and with fully charged batteries and the aerial up (this range may be considerably reduced indoors due to the specific environmental situation, the layout of walls and furniture, the presence of metal structures, electromagnetic fields/disturbances of internal or external origin, reinforced concrete walls, when rooms are located on different floors or because the batteries are not fully charged etc.).

Mains adapter
2 100-240V~50/60Hz / 5VDC, 1A mains adapters.
Mod. K05S050100G
INPUT: 100-240V~ 50/60Hz 0.2 A
OUTPUT: 5VDC, 1A
Li-Polymer rechargeable battery
Rated capacity: 2000mAh
Nominal voltage: 3.7V
Li-Polymer batteries perform best when used at normal room temperature (20°C±5°C).
Battery Charging Temperature: 10°C~40°C.
INDEX OF SYMBOLS
Single-phase alternating current
Direct current
For indoor use only
Class II – double insulation equipment
** Complies with relevant EC directives as amended
DISPOSAL
THIS PRODUCT COMPLIES WITH EU DIRECTIVE 2012/19/EU.
The crossed bin symbol on the appliance indicates that the product, at the end of its life, must be disposed of separately from domestic waste, either by taking it to a separate waste disposal site for electric and electronic appliances or by returning it to your dealer when you buy another similar appliance. The user is responsible for taking the appliance to a special waste disposal site at the end of its life.
If the disused appliance is collected correctly as separate waste, it can be recycled, treated and disposed of ecologically; this avoids a negative impact on both the environment and health, and contributes towards the recycling of the product’s materials. For further information regarding the waste disposal services available, contact your local waste disposal agency or the shop where you bought the appliance.
CONFORMITY WITH EU DIRECTIVE 2006/66/EC as amended.**
The crossed bin symbol on the batteries or the product packaging indicates that, at the end of their life, they must be disposed ofseparately from domestic waste, either by taking them to a separate waste disposal site for batteries or by returning them to your retailerwhen you buy similar rechargeable or non-rechargeable batteries. Chemical symbols (Hg for mercury, Cd for cadmium, Pb for lead)printed beneath the crossed-out wheeled bin symbol indicate the type of substance contained in the battery. The user is responsible for taking thebatteries to special waste disposal sites at the end of their life so they can be processed and recycled. The correct separate waste disposal of your oldtoy will help prevent potential negative consequences for the environment and human health and favour the recycling of the materials of which theproduct is made. Illegal disposal of the product by the user will damage the environment and human health. For further information regarding thewaste disposal services available, contact your local waste disposal agency or the shop where you bought the appliance.

DECLARATION OF COMPLIANCE

Hereby, Shenzhen Videotimes Technology Co.,Ltd, declares that the radio equipment MOD. 06949 is in compliance with Directive 2014/53/EU.
The complete text of the EU Declaration of Compliance is available at: www.chicco.com/declarations. In accordance with European Commission Decision No. 2000/299/EC dated 06/04/2000, the frequency band used by this product has been harmonised for all EU Countries and this is therefore a Class 1 product which can be used in all European Union Countries.

WARRANTY

The product is guaranteed against any conformity defect in normal conditions of use as stated in the instructions. Therefore, the warranty does not apply in the case of damage caused by improper use, wear or accidental events. For the duration of warranty on conformity defects, please refer to the specific provisions of national laws applicable in the country of purchase, where provided. ARTSANA S.p.A. reserves the right to change information provided in this manual at any time and without notice. The reproduction, transmission, transcription and translation into another language of this manual, even partially, are strictly prohibited without the prior written consent of ARTSANA.

Manufacturer:
Shenzhen Videotimes Technology Co.,Ltd,
Room 601, 6th Floor, Block B, Chuang Ling Tong Technology Building, ShiHua Road, Fubao Community,
Fubao District, Futian District, Shenzhen, China
Distributed by:
Artsana S.p.A. – Via Saldarini Catelli, 1 – Grandate (CO) – Italy – www.chicco.com

Documents / Resources

| Chicco Baby Monitor Video Deluxe [pdf] User Manual
Baby Monitor Video Deluxe, Baby, Monitor Video Deluxe, Video Deluxe
---|---

References

• Official Corporate Chicco website
• Official Corporate Chicco website
• Official Corporate Chicco website
• Официальный сайт Chicco Россия

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>