PhoneSoap 3 UV Cell Phone Charger User Manual
- June 15, 2024
- phonesoap
Table of Contents
PhoneSoap 3 UV Cell Phone Charger User Manual
Introduction
The revolutionary and cutting-edge PhoneSoap 3 UV Cell Phone Charger combines the ease of charging your smartphone with the ability of UV-C light technology to disinfect and sanitize your mobile device. With smartphones in our hands all the time and exposure to different germs and bacteria, the PhoneSoap 3 offers a solution that makes sure your phone is fully cleaned and charged at the same time. This small, easy-to-use device uses strong UV-C lamps to remove up to 99.99% of bacteria, viruses, and other dangerous pathogens from the surface of your phone.
It is an indispensable addition to your everyday routine for a more hygienic and healthful mobile experience, thanks to its sleek and modern design and compatibility with a broad variety of smartphones and small accessories. The PhoneSoap 3 is your one-stop shop for charging and sanitizing your device, so wave goodbye to worries about how clean your phone is.
Product Specifications
-
Dimensions:
The PhoneSoap 3’s typical measurements are suitable for the majority of smartphones and tiny accessories. -
UV-C Lamps:
Fitted with strong UV-C lamps that release germicidal ultraviolet light. Built-in charging ports for iPhone and Android devices are available. -
Sanitizing Time:
It typically takes ten minutes to finish the sanitizing cycle. -
Safety Features:
Complete with safety sensors that, if the lid is opened while the sanitizing cycle is in progress, instantly switch off the UV-C lamps. -
Power Source:
Usually powered by an AC adapter and a regular wall outlet. -
Compatibility:
Made to fit the majority of smartphones, including larger models, as well as little add-ons like earbuds, credit cards, and keys.
How To Connect
-
Turn on and plug in:
Connect the supplied AC adapter to a power source. Attach the AC adapter’s other end to the PhoneSoap 3’s back. -
Slide the lid open:
To access the PhoneSoap 3’s sanitizing chamber, lift the lid. -
Put Your Phone Inside:
Put your smartphone in the chamber that is being sanitized. Make sure your phone is positioned correctly to allow for full exposure to UV-C light on all sides. -
Shut the Lid:
Securely close the lid. The cycle of sanitization will begin on its own. -
Await Sanitization:
The PhoneSoap 3 usually takes around ten minutes to finish the sanitizing cycle. During this period, the surface of your phone is sanitized by the germicidal light that the UV-C lamps emit. -
Get Your Sanitized Phone Back:
After the cycle is complete, remove your now-sanitized phone by opening the lid. -
Switch Off:
The PhoneSoap 3 can be turned off after use by pressing any power buttons that may be present or by unplugging it from the electrical outlet.
Product Features
-
UV-C Sanitization:
Up to 99.99% of bacteria, viruses, and other pathogens on the surface of your phone can be eliminated by the PhoneSoap 3 using UV-C light. -
Dual Purpose:
You can charge your phone while it’s being sanitized thanks to its dual functionality as a charger and phone sanitizer. -
Universal Charging:
Having charging ports for both iPhones and Android smartphones makes it adaptable to a variety of users. -
Automatic Shutoff:
To avoid unintentional exposure, safety sensors make sure that the UV-C lamps automatically turn off if the lid is opened during a sanitizing cycle. -
Compatibility:
It is compatible with a wide range of gadgets and objects, accommodating small accessories and smartphones of different sizes. -
Sleek Design:
The PhoneSoap 3 has a sleek, contemporary design that goes well in any environment.
Usage Instructions
-
Plug-In and Power On:
Connect the PhoneSoap 3 to a standard wall outlet using the provided AC adapter. Power on the device by pressing the button on the top. -
Open the Lid:
Lift the lid of the PhoneSoap 3 to reveal the sanitizing chamber. -
Place Your Phone Inside:
Insert your smartphone or small accessories into the sanitizing chamber. Ensure that the phone is positioned properly to allow UV-C light exposure to all sides. -
Close the Lid:
Close the lid securely. The sanitizing cycle will begin automatically. -
Wait for Sanitization:
The PhoneSoap 3 typically completes the sanitization cycle in about 10 minutes. During this time, the UV-C lamps emit germicidal light to disinfect your phone’s surface. -
Retrieve Your Sanitized Phone:
Once the cycle is finished, open the lid and remove your now-sanitized phone or accessories. -
Power Off:
After use, press the button on top of the PhoneSoap 3 to turn it off. -
Charge Your Phone:
You can now use the built-in charging ports to charge your device if needed.
Fits all smartphones, keys, wallets, and more Up to 3.74 by 6.8 inches
Clinically proven results.
Kills 99.99% of Staph, E. Coli, Salmonella, and other harmful bacteria and
viruses. close the lid to begin disinfection, and then remove your new one.
Care and Maintenance
-
Clean the Interior:
Using a soft, lint-free cloth, clean the interior of the PhoneSoap 3 regularly to remove any dust or residues that may accumulate. Make sure the UV-C lamps are clean and free of debris. -
Wipe the Device’s Exterior:
Using a damp cloth, clean the device’s exterior. Avoid using abrasive or harsh chemicals that could damage the surface. UV-C lamps have a limited lifespan and must be replaced. If they stop working, contact the manufacturer or an authorized service center.
Safety Precautions
-
UV-C Light:
UV-C light is harmful to the eyes and skin. Avoid looking directly at the UV-C lamps when the PhoneSoap 3 is in operation and keep the lid closed during the sanitizing cycle. -
Child Safety:
Keep the PhoneSoap 3 out of reach of children to prevent accidental exposure to UV-C light. -
Electrical Safety:
Ensure that the device is connected to a properly grounded electrical outlet and use only the provided AC adapter and power cord. -
Device Compatibility:
Confirm that your phone is compatible with the PhoneSoap 3 and fits comfortably inside the sanitizing chamber. -
Lid Safety:
Do not attempt to force the lid open while the sanitizing cycle is in progress. The safety sensors should automatically turn off the UV-C lamps if the lid is opened during operation.
Troubleshooting
-
The device is not initiating the sanitizing cycle:
Make sure the device is plugged into a working electrical outlet. Make sure the lid is securely closed. If the lid is not properly closed, the sanitizing cycle will not begin. -
The sanitizing cycle is taking longer than usual:
If the UV-C lamps are partially blocked or the device is running on a low battery, the sanitizing cycle may take longer. Make sure the lamps and the device are both clean and fully charged. -
Your Phone Isn’t Charging:
If the PhoneSoap 3 is not charging your phone, make sure that the charging cable from your phone is properly connected to the charging ports on the device.
Warranty
The PhoneSoap 3 UV Cell Phone Charger’s warranty may differ depending on the retailer or manufacturer. For specific details and coverage, consult the product’s warranty information provided by the seller or manufacturer. Typically, such products include a limited warranty that covers manufacturing defects and malfunctions for a set period after purchase. Keep your purchase receipt and warranty information in case you need to file a warranty claim.
FAQs
What is the purpose of the PhoneSoap 3 UV Cell Phone Charger?
The PhoneSoap 3 is designed to sanitize and disinfect your smartphone using UV-C light while also serving as a phone charger.
How does UV-C light work to sanitize my phone?
UV-C light emits high-energy ultraviolet rays that destroy the DNA and RNA of bacteria, viruses, and other microorganisms, rendering them harmless.
Is UV-C light safe for my phone?
Yes, UV-C light is safe for your phone. It primarily targets surface contaminants and does not harm your device.
What can I sanitize in the PhoneSoap 3 besides my phone?
You can sanitize small accessories such as keys, credit cards, earphones, and other small items that fit inside the sanitizing chamber.
How long does it take to sanitize my phone in the PhoneSoap 3?
The sanitizing cycle typically takes about 10 minutes to complete.
Do I need to remove my phone case before sanitizing it?
It is generally recommended to remove your phone case for more effective sanitization. UV-C light may have limited penetration through thick or opaque cases.
Can I use the PhoneSoap 3 to charge my phone and sanitize it simultaneously?
Yes, the PhoneSoap 3 allows you to charge your phone while it's being sanitized.
Is it safe to open the PhoneSoap 3 during the sanitizing cycle?
No, it's not safe to open the device during the sanitizing cycle. The safety sensors should automatically turn off the UV-C lamps if the lid is opened.
Can I use the PhoneSoap 3 for tablets or larger devices?
The PhoneSoap 3 is primarily designed for smartphones, but it can also accommodate smaller tablets or devices that fit within its sanitizing chamber.
How often should I use the PhoneSoap 3 to sanitize my phone?
The frequency of use depends on your preferences and needs. Many users sanitize their phones daily or as often as they feel necessary.
Can I use the PhoneSoap 3 with a phone that has a screen protector or tempered glass?
Yes, the PhoneSoap 3 is safe to use with phones that have screen protectors or tempered glass.
What is the warranty for the PhoneSoap 3 UV Cell Phone Charger?
The warranty terms may vary, so check the product's warranty information provided by the retailer or manufacturer for specific details and coverage. Typically, such products come with a limited warranty covering manufacturing defects and malfunctions within a specified period from the date of purchase.