PowerColer RX 7800 XT Red Devil Limited Installation Guide

: June 15, 2024
: PowerColer

Table of Contents

PowerColer RX 7800 XT Red Devil Limited
Product Specifications
Product Usage Instructions
Driver Installation
Driver Installation Links
- Installation and Usage Guide
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PowerColer RX 7800 XT Red Devil Limited

Power-Coler-RX-7800-XT-Red-Devil-Limited-product

Product Specifications

Expansion Slot: Motherboard with one or more PCI Express x16 slot
Display : Monitor or other display device

Product Usage Instructions

Hardware Installation

Turn off the computer, switch off the PSU, and disconnect the power cord.
Open the case.
Remove any existing graphics card (if applicable) or PCIE slot covers.
Insert the Graphics Card into the PCIE slot.
Make sure seating is secured with the PCIE locking mechanism in place.
Secure the graphics card to the PCIE bracket with thumbscrew.
Plug in the required external PCIE power connectors (if applicable) from the appropriate PC Power Supply Unit.
Close the case.
Connect the display cable to the corresponding GPU display output port.
Power on the System, booting to OS. (Removing all drivers for your previous card and performing a clean install of the new drivers is recommended.)

Driver Installation

Please download the driver.
Install the driver based on your product.
Execute the driver and follow the instructions.

Driver Installation Links

Driver for PowerColor : https://www.powercolor.com/downloads
Driver and Support for AMD : https://www.amd.com/en/support

Additional Support (Optional)
If the graphics card has multiple BIOS switches, you can switch to your personal preference.

Confirm that the computer is powered off and switch the BIOS you want.
Reboot your PC.

For additional support details, please refer to: https://www.powercolor.com/ for specific model support.

LED Software Support (Optional)
For graphics cards with RGB functions, the Devil Zone RGB Software will enable color customizations. For additional support details, please refer to: https://www.powercolor.com/downloads for specific model features.

Devil Club (Optional)
Join our DevilClub! If you bought a Red Devil card, you will find an invitation code inside the retail box. Join at: https://devilclub.powercolor.com/

AMD Radeon Setting Software Installation
To take full advantage of the features and capabilities of your Radeon Graphics products, installing the most up-to-date Radeon Software is recommended. For more support, visit: https://www.amd.com/en/support/driverhelp Please make sure you choose Full Install when installing the driver to enjoy the full function of the software.

Addressable RGB (ARGB) LED Cable Connection

The factory default setting is controlled by PowerColor Devil
Zone. If you want to sync with motherboard software, please disable GPU control on Devil Zone.
Connect the ARGB LED cable to the motherboard header.
Connect the ARGB LED cable to the PowerColor graphic card RGB header.
(Optional) Connect the ARGB LED cable to other components such as chassis or chassis cooling fans.

The ARGB LED Header supports ARGB LED cable, with a maximum power rating of 3A (5V) and a total length within 2 meters.

Notices:

Do not install an RGB LED cable in the ARGB LED Header; otherwise, the hardware and cable may be damaged.
Only use the ARGB LED cable to connect on both the motherboard and PowerColor graphics card.

Frequently Asked Questions

What are the system requirements for this product?
The system requirements are a motherboard with one or more PCI Express x16 slots and a monitor or other display device.

How do I install the graphics card?
Follow these steps:

Turn off the computer, switch off the PSU, and disconnect the power cord.
Open the case.
Remove any existing graphics card (if applicable) or PCIE slot covers.
Insert the Graphics Card into the PCIE slot.
Make sure seating is secured with the PCIE locking mechanism in place.
Secure the graphics card to the PCIE bracket with thumbscrew.
Plug in the required external PCIE power connectors (if applicable) from the appropriate PC Power Supply Unit.
Close the case.
Connect the display cable to the corresponding GPU display output port.
Power on the System, booting to OS. (Removing all drivers for your previous card and performing a clean install of the new drivers is recommended.)

How do I install the driver?
Follow these steps:

Download the driver from the provided link.
Install the driver based on your product.
Execute the driver and follow the instructions.

How can I get additional support?
For additional support details, please refer to the provided links and documentation specific to your model.

Quick Installation Guide

$Power-Coler-RX-7800-XT-Red-Devil-Limited-fig- $1$$ $Power-Coler-RX-7800-XT-Red-Devil-Limited-fig- $2$$

System Requirements

Expansion Slot : Motherboard with one or more PCI Express x16 slots.
Display : Monitor or other display device with compatible connectivity to the output interface of your graphics card.
Power requirement: Power Consumption differs by model. (For additional support details, please refer to: www.powercolor.com/ to calculate your minimum system power requirement.)
Operation System: Linux©/Windows® 10/Windows® 11 (For additional support details, please refer to: https://www.amd.com/en/support)

Hardware Installation

Turn off the computer, switch off the PSU, and disconnect the power cord.
Open the case.
Remove any existing graphics card (if applicable) or PCIE slot covers.
Insert the Graphics Card into the PCIE slot.
Make sure seating is secured with the PCIE locking mechanism in place.
Secure the graphics card to the PCIE bracket with a thumbscrew.
Plug in the required external PCIE power connectors (if applicable) from the appropriate PC Power Supply Unit.
Close the case.
Connect the display cable to the corresponding GPU display output port.
Power on the System, booting to OS. (Removing all drivers for your previous card and performing a clean install of the new drivers is recommended.)

Driver Installation

Please download the driver.
Install the driver based on your product.
Execute the driver and follow the instructions.

Driver Installation Link

Driver for PowerColor
https://www.powercolor.com/downloads
Driver and Support for AMD
https://www.amd.com/en/support

Additional Support (Optional)
*If the graphics card has multiple BIOS switches, you can switch to your personal preference.

Confirm that the computer is powered off and switch the BIOS you want.
Reboot your PC. (For additional support details, please refer to: https://www.powercolor.com/ for specific model support)

LED Software Support (Optional)
*For graphics cards with RGB functions, the Devil Zone RGB Software will enable color customizations. (For additional support details, please refer to: https://www.powercolor.com/downloads for specific model features)

Devil Club (Optional)

Join our DevilClub!
If you bought a Red Devil card, you will find an invitation code inside the retail box.

Join at : https://devilclub.powercolor.com/

AMD Radeon Setting Software Installation
To take full advantage of the features and capabilities of your Radeon Graphics products, installing the most up-to-date Radeon Software is recommended. (For more support, visit: https://www.amd.com/en/support/driverhelp)

*Please make sure you choose “Full Install” when installing the driver to enjoy the full function of the software.

Addressable RGB (ARGB) LED Cable Connection

Connect the ARGB LED cable to the ARGB LED Headers between the PowerColor graphics card and your motherboard, the PowerColor LED light can be controlled by PowerColor Devil Zone software or synchronized via motherboard software.
The factory default setting is controlled by PowerColor Devil Zone, if you want to sync with motherboard software, please disable GPU control on Devil Zone.
- You can also connect another ARGB device to the male connector for syncing with the motherboard ARGB control. $Power-Coler-RX-7800-XT-Red-Devil-Limited-fig- $3$$
The ARGB LED Header supports ARGB LED cable, with a maximum power rating of 3A (5V) and a total length of 2 meters.

Notices:

Do not install an RGB LED cable in the ARGB LED Header; otherwise, the hardware and cable may be damaged.
Only use the ARGB LED cable to connect on both the motherboard and PowerColor graphics card.
The PowerColor graphics card is compatible with motherboards that have headers for ARGB LED cables. The headers should have the 3-pin configuration. For further information concerning compatibility, refer to the manual of your mainboard, or visit the manufacturer’s website.
To avoid damaging any hardware, please make sure the system is turned off and the power cord is unplugged before connecting or removing the ARGB LED cable.

Graphics Card Holder Installation Guide

Contents $Power-Coler-RX-7800-XT-Red-Devil-Limited-fig- $4$$

Instructions $Power-Coler-RX-7800-XT-Red-Devil-Limited-fig- $5$$

Installation and Usage Guide

Usage Notice
As the swappable backplate includes magnets, the inappropriate use and storage environment or temperature may cause magnetic aging to different level. Please follow the advices below when using the product.

Please prevent the product from being impacted, to avoid the magnets from being cracked or falling off the backplate.
Humidity may lead to corrosion. Please use or store the product in a dry environment.
Avoid storing the product in a continuing high-temperature environment.
Keep the product away from impurities such as iron filing so as not to affect the contact with the original backplate.
Store the product away from magnetic field-sensitive items like credit cards, watches, or iron products to avoid demagnetization or magnetization of such items.
Please note that some designs might need some spaces between the Graphics card and other components.

$Power-Coler-RX-7800-XT-Red-Devil-Limited-fig- $7$$

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>