Loddery ID217 Smart Watch Men User Manual
- June 15, 2024
- Loddery
Table of Contents
Loddery ID217 Smart Watch Men
Product Information
- Specifications
- Model: Smartwatch ID 217
- Bluetooth: Yes
- Supported Notifications: SMS, WhatsApp, Facebook, Instagram, calendar, email
Product Usage Instructions
-
Connecting to the Device via Bluetooth
- To connect your device to your phone via Bluetooth:
- Make sure your phone’s Bluetooth is enabled.
- Refer to the FAQ section for troubleshooting if you are unable to connect.
-
Synchronizing Data via Bluetooth
- To sync data via Bluetooth:
- Ensure that the Bluetooth connection is working (refer to the FAQ section for troubleshooting)
- Swipe down on the home screen of the Veryfit app or manually refresh data to start the sync.
- If syncing fails, check whether the Bluetooth connection timed out.
-
Enabling Phone’s Bluetooth
- You need to enable your phone’s Bluetooth all the time while wearing the device.
-
Using Message Notifications
- To use message notifications:
- Ensure that the device is connected to your phone via Bluetooth.
- When you receive a message, the notification icon on the device displays the notification count.
- You can view the last 10 notifications that were received.
- To dismiss a notification, touch and hold it.
- WhatsApp, SMS, and Incoming Call Notifications
- If you are not receiving WhatsApp, SMS, or incoming call notifications:
- Ensure that WhatsApp is running even when the screen is switched off and is not logged in on your phone and computer simultaneously.
- Make sure the device is always connected to your phone via Bluetooth.
- Refer to the FAQ section for additional troubleshooting steps.
-
Incoming Call Notifications
- To use incoming call notifications:
- Ensure that the device is connected to your phone via Bluetooth.
- You can only use the smartwatch to reject calls; answering or initiating calls is not supported.
- If the caller is not in your contacts, the phone number will be displayed.
-
Vibrations on Incoming Calls
- If the device doesn’t vibrate on incoming calls:
- Make sure Bluetooth is enabled on your phone and that the device is connected.
- On Android devices, ensure that the Veryfit app is running (in the foreground or background).
- Add the Veryfit app to the relevant whitelist to prevent RAM clearing or blocking by home screen widgets or phone manager apps.
- Changing Vibration Count for Incoming Call Notifications
- The vibration count for incoming call notifications cannot be changed. The device vibrates at the set time until you answer or reject a call. You can press the touch key to disable vibrations.
-
Step Count Accuracy
- To improve step count accuracy:
- The device has a minimum threshold of ten steps. The total step count shown in the Veryfit app only changes when you take more than 10 steps.
- The device starts recording data after your tenth step and only saves data when you have completed 30 steps.
-
Frequently Asked Questions (FAQ)
-
Q: Why can’t I connect to the device via Bluetooth?
-
A: Make sure your phone’s Bluetooth is enabled. Refer to the troubleshooting steps in the manual for further assistance.
-
Q: Why does Bluetooth keep disconnecting?
-
A: Refer to the troubleshooting steps in the manual for possible solutions to the Bluetooth disconnection issue.
-
Q: Why does it take so long to sync data via Bluetooth? Why does syncing fail?
-
A: There could be various reasons for slow syncing or syncing failure. Make sure the Bluetooth connection is working, refresh data manually, and check if the Bluetooth connection timed out. Refer to the manual for more troubleshooting steps.
-
Q: Do I need to enable my phone’s Bluetooth all the time while wearing the device?
-
A: Yes, you need to keep your phone’s Bluetooth enabled at all times while wearing the device.
-
Q: How do I use message notifications?
-
A: Follow the instructions provided in the manual to configure and use message notifications for SMS, WhatsApp, Facebook, Instagram, calendar, and email.
-
(FAQ)
Smartwatch ID 217 Frequently Asked Questions
- Why can’t I connect to the device via Bluetooth?
- Check whether the operating system of your mobile phone is Android 6.0 and above, or iOS 8.0 and above;
- For a better experience, please download the latest VeryFit app.
- Check whether the Bluetooth is enabled and working properly on your phone. It is recommended to turn off all programs and restart the Bluetooth before reconnecting.
- Scan the QR code displayed on the smartwatch or tap “Add Device” in the app to connect.
- It is recommended to pair with the device in an open area to avoid interference from other devices;
- Why does Bluetooth keep disconnecting?
- Make sure the distance between the phone and the device does not exceed 7 m, otherwise, the signal may be too weak.
- Make sure there is nothing between the phone and device that might obstruct the Bluetooth signal, for example, your body or metal objects such as jewelry.
- Make sure the device battery has sufficient power to use Bluetooth and keep the screen lit.
- Make sure your phone s Bluetooth is working. Try closing all apps, and then disable and re-enable Bluetooth.
- If the Veryfit app is running in the background, iOS may close the app automatically, which can cause Bluetooth to disconnect.
- Bluetooth may automatically disconnect if your phone is in power-saving mode or if you are using a phone manager app. Please check your phone settings and then try again.
- Why does it take so long to sync data via Bluetooth? Why does syncing fail?
- Make sure the Bluetooth connection is working. You can refer to the previous two questions.
- Swipe down on the home screen Of the Veryfit app or manually refresh data to start the sync.
- Check whether the Bluetooth connection timed out.
- Do I need to enable my phone’s Bluetooth all the time while wearing the device?
- The device does not need to be connected to your phone to count steps, record sleep data, or use the alarm clock. For example, you can do your exercise while wearing your device, and then connect the device to your phone and perform a sync to view exercise data.
- Alarm clock: Use the Veryfit app to configure the alarm time and sync it to the device. Once you have configured the alarm time, you can disconnect the device from your phone. To use the Call Reminder and Find Phone features, you have to turn on your phone’s Bluetooth and connect the device to your phone.
- Find My Phone, Music Control, Lift your wrist to turn on the screen, and Weather Push.
- Before you use the device for the first time, please remove the protective film on its screen and charge it to activate it. Keep the screen on and keep the device ready for pairing.
- Turn on the VeryFit app, and tap [Scan] in the upper right Of (Device] interface to scan the QR code displayed on the smartwatch to connect.
- In the app, tap (Device], enter the (More settings] page and enable the functions such as “Find
- My Phone”, “Music Control”, Lift your wrist to turn on the screen” “Weather Notifications”, etc. Finally, sync the smartwatch again.
- How do I use message notifications?
- The device supports SMS, WhatsApp, Facebook, Instagram, calendar, and email notifications. These can be configured through the Veryfit app.
- Ensure that the device is connected to your phone via Bluetooth.
- When you receive a message, the notification icon on the device displays the notification count. You can view the last 10 notifications that were received.
- Touch and hold a notification to dismiss it.
- Why don’t I receive WhatsApp, SMS, or incoming call notifications on my device?
- In [Device], enter [Notifications] enable [Allow notifications] enable [WhatsApp/SMS…] to enable the Smart Reminder in the App.
* In (Device), enter [Call Alert] enable [Call Alert) to enable the Call Reminder in the App.
* It will save and synchronize the settings to the smartwatch. For the iOS system, you also need to allow Bluetooth pairing and enable Share Notifications.
2. Ensure that Bluetooth is always connected. The device does not display notifications for messages or calls that are received while Bluetooth is disconnected.
3. For iOS 13 and above, go to [Settings] – turn on [Bluetooth] – select (My Device] – select (ID217] – turn on [Share System Notification).
4. After the device is set to DND (DO Not Disturb) mode, you will not receive notifications.- Why don’t I receive notifications when notifications for WhatsApp messages are enabled?
- The following conditions must be met to receive WhatsApp message notifications:
- WhatsApp are running even when the screen is switched Off.
- WhatsApp should not be logged in on your phone and computer simultaneously.
- The device is always connected to your phone via Bluetooth.
- Cannot receive notifications?
- Try to:
- GO to Device > Notifications and turn the setting on;
- Shut down your phone and start it again, but do not use the “Restart” function. When you use the device for the first time, please remove the protective film on the screen and charge the device to activate. Keep the screen on and keep the device in pairable mode.
- How do I use incoming call notifications?
- Ensure that the device is connected to your phone via Bluetooth.
- You can only use the smartwatch to reject calls; answering or initiating calls is currently not supported.
- If the caller is not in your contacts, the phone number will be displayed.
- Why doesn’t the device vibrate on incoming calls, even when I have enabled this feature?
- Make sure Bluetooth is enabled on your phone and that the device is connected.
- On Android devices, ensure that the Veryfit app is running (in the foreground or background).
* **Note:** Home screen widgets that clear RAM and phone manager apps may close or block apps on your phone. Therefore, it is recommended that you add the Veryfit app to the relevant whitelist.- Can I change the number Of vibrations for incoming call notifications? What is the maximum vibration count?
- The vibration count for incoming call notifications cannot be changed.
- The device vibrates at the set time until you answer or reject a call. When you have an incoming call, you can also press the touch key to disable vibrations.
- Why doesn’t the device count my steps as soon as I start walking?
* TO improve step count accuracy, the device has a minimum threshold Of ten steps.
* This means that the total step count shown in the Veryfit app only changes when you take more than 10 steps.
* The device starts recording data after your tenth step and only saves data when you have completed 30 steps.- Which factors affect the accuracy Of heart rate readings?
* Factors like wearing the device too loosely, swinging your arms, or sliding Of the device over your skin can impact heart rate readings. In addition, wearing the device too tightly, raising your arms,or clenching your fists can affect blood circulation, which also affects sensor performance. When testing your heart rate, it is recommended that you keep your arm straight, remain static, and relax your muscles. Ensure that the device remains in close contact with your skin.
* **Note:** Even when you wear the device correctly, individual differences such as skin color, body hair, tattoos, and scars can also affect heart rate sensor performance slightly.- Which factors affect the accuracy Of step counting?
* The accelerometer and algorithms that the device uses to count your walking steps are highly sensitive, even small differences may affect the accelerometer and algorithms. You must provide accurate personal data during the device’s initial configuration. For example, if you enter the wrong gender, height, weight, or age, it would result in inaccurate exercise data, such as incorrect counting Of steps, distance, or calories.
* In addition, factors such as your arm swing, stride, posture, road surface, and slope can also affect the step count.- Effective exercise
* Only when the exercise duration meets the minimum requirement will its data be saved to the exercise records. The minimum requirement is 1 minute.- How do I sync data? What should I do if the connection failed” message is shown.
- Data is automatically synced when you open the Veryfit app. You can also swipe down on the message list on the app’s home screen to sync data.
- If the “Connection failed” message is shown, try the following steps:
- Swipe down on the home screen again.
- Close and re-open the Veryfit app.
- If neither Of the above works, disable and re-enable Bluetooth on your phone, or restart your phone. (You can also try clearing the Bluetooth cache before restarting your phone.)
* **Note:** On iOS devices, turn on the Bluetooth settings and locate your device in the device list. Touch the symbol next to the device name and touch “Forget this Device”. Disable and re-enable Bluetooth or restart your phone.- Can the device store data without being connected to my phone? How long can it storedata for?
- The device doesn’t need to be connected to your phone to store exercise or sleep data. TOsync data from the device, enable Bluetooth on your phone and ensure it is within range Of the device.
- The device can retain seven days’ exercise and sleep data in typical use.
- Why can’t I sync sleep data? Why is the sleep data inaccurate?
- Ensure that you always wear the device when asleep; otherwise, no sleep data will be available when you sync the device with the Veryfit app.
- Sleep will be tracked around the clock. However, your sleep will be recorded only if it lasts for three hours (there are three stages of sleep: deep sleep, light sleep and REM sleep). Going back to sleep after getting out of bed, sleeping in, or playing with mobile phone in bed will affect the recording of your sleep.
- If you don’t wear the device before going to bed, or if you take off the device immediately after getting up, the recorded sleep time will be prolonged or inaccurate.
- Why is the weather data not synced to the device? Why is the weather data displayed incorrectly?
* The device does not download weather data directly. To update weather data, you must sync the device with the Veryfit app as follows:
1. Ensure that the device is connected to the Veryfit app.
2. Ensure that the “Device” > “More” > “Weather Forecast” switch is enabled.
* **Note:**
1. If location permissions have been granted to the Veryfit app, the app determines your location automatically. If the app cannot determine your location, weather data will not be available. For better service, enable GPS to improve positioning accuracy.
2. When the device is connected to the Veryfit app, the app periodically sends updated weather data to the device. However, when network coverage is poor, weather data may not be synced. In this case, earlier weather data is displayed (if available), or the message “data unavailable” is displayed.
3. When the device is not connected to the Veryfit app, weather data is not synced. In this case, earlier weather data is displayed (if available), or the message “data unavailable” is displayed.- Why is there a green light on the back of the device?
* The green light is used to measure your heart rate. If you have enabled automatic heart rate monitoring, the light will turn on periodically. To disable this feature, select Manual Heart Rate
* Monitoring. Your device features an industry-standard optical heart-rate sensor that is certified as safe to use.- Is the device waterproof? Can I wear it in the shower?
* The device is waterproof and can be worn in a shower, but the water temperature must be controlled below 400C.
* **5 ATM resistant:** Keep the device at a water depth of 50 meters for 3-5 minutes, then take it out.
* If its functions and appearance are normal, we define it as 5 ATM resistant.
* The device is suitable for use in showers, swimming pools and shallows, but is not suitable for use while diving or in a sauna. It is not resistant to acidic and alkaline solutions, chemical reagents, and other aggressive liquids.- Which version of the Veryfit app should I download for better compatibility?
- For a better experience, please download the latest VeryFit app.
- To install the App, please make sure that the operating system of your mobile phone is Android 6.0 and above, or iOS 8.0 and above.
- Why doesn’t the screen always turn on when I raise my wrist?
* We have adapted this feature to prevent the screen from turning on by accident, such as when you move your arms while asleep.
* To turn on the screen, twist your wrist so that the screen faces upwards.
* We recommend that you practice this action until you get familiar with the optimum tilt angle.- How do I charge the device?
- Remove the device from the wrist strap. Connect the device with the USB adapter via a USB cable, and plug it into a power outlet (ensure that the USB connector is correctly oriented). To reduce the charging time, the device’s screen switches off while charging. However, you can swipe the screen to wake it and check the charging progress.
- Typically it takes 1—2 hours to fully charge the device. The battery life is approximately 7-10 days for normal use and up to 45 days of standby time.
- Choose a power source to charge the device: either via a USB port of a PC or a charger of a mobile phone (the rated voltage of the device is 3.7VN4.2V, while the rated voltage of a USB port is usually 5V, so a USB port is an ideal choice). It usually takes 1-2 hours to fully charge the device via a USB port. Do not use a fast charging power source (9V), otherwise, it may shorten the device’s battery life.
- How to set the unit of measurement (metric/imperial), unit of temperature, time format, and start of the week?
- Open the App, go to “My” – “Preferences”, and set the unit of measurement. Once the setting is done, it will be synchronized to the device.
- Tap “Time Format” to switch between 12-hour and 24-hour.
- Tap “Distance/Temperature” to switch between Metric and Imperial, and set the unit of temperature.
- Tap “Week Start Day” to set the start day of the week.
Read User Manual Online (PDF format)
Loading......