KIRRON G1608L Mobile Power Station User Manual

Powerbank & Solar Generator
Portable Mobile Power Station
LIFEPO4, 1456Wh, 230V, 12V, USB TYPE C, 2000 W, MPPT 400W
User Manual

G1608L Mobile Power Station

ISLAND 1500 LIFEPO

Dear Customer,
Thank you for purchasing our Portable Solar Power Station.
Please read the user manual carefully before using them for the first time and keep them safe!
With the help of this manual you will be able to operate this product safely.
The images in this manual are for reference only.
Thank you for your attention and understanding!
If you want to know more about our products, please visit our website: www.klc.solar

Your New Solar Generator, Power Bank Mobile Power Station

Dear Customer,
Thank you for purchasing this solar converter with power bank. Thanks to it you can provide 230V, 12V and USB devices with new energy at any time any where without mains supply.
Please read these operating instructions and follow the instructions, so that you can use your new solar converter with power bank optimally.

What’s in the package:

• 1*2000W PowerStation
• 1*DC Adapter with Cable
• 1*Anderson-MC4 Cable
• 1*Car Charger
• 1*Bag and Dust Cover
• 1*User Manual

Important Notes

Safety instructions:

• Read the instructions for use carefully. It contains important information on the use, safety and maintenance of the device. Instructions for use carefully keep it and, if necessary, pass it on to subsequent users.
• The device may only be used for the intended purpose, in accordance with these instructions for use.
• Observe the safety instructions when using.
• Before starting up, check the device and its connecting cable and accessories for damage. Do not use the device if it shows any visible damage.
• Only charge the device at standard household sockets. Check whether the mains voltage specified on the rating plate matches that of your mains supply.
• Do not squeeze the connecting cable, do not pull it over sharp edges or hot surfaces; Do not use the connecting cable for carrying.
• If the power cord of this device is damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person in order to avoid hazards.
• Disconnect the device from the mains: -after each use, -in the event of malfunctions during operation, – before cleaning the device.
• Never pull the plug out of the socket by the mains cable or with wet hands.
• The device is intended exclusively for household use or similar purposes. It may not be used for commercial purposes
• The device is only suitable for indoor/outdoor use.
• Make sure that the device is stable during operation and that the power cable can not be tripped over.
• Never use the device after a malfunction, e.g. the device has fallen into water, dropped or damaged.
• The manufacturer assumes no responsibility for incorrect use resulting from non-observance of the instructions for use.
• Modifying or modifying the product affects product safety. Caution: risk of injury
• All changes and repairs to the device or accessories may only be carried out by the manufacturer or persons expressly authorized by the manufacturer to do so.
• Make sure that the product is charged from an outlet that is easily accessible so that you can quickly unplug the device from the mains in an emergency.
• Never open the product yourself. Never carry out repairs yourself !
• Handle the product carefully. It can be damaged by bumps, hits or falling from even a small height.
• Keep the product away from moisture and extreme heat. Never immerse the product in water or other liquids.
• ATTENTION: Only devices with a maximum power output of 2000\ may not exceed the 230V AC output of the device.
• All outputs together (AC + Car + USB A and USB C) must not exceed a max power output of 2000W.
• The solar converter delivers a pure sine wave voltage and it can be used to operate standard electronic devices that corespond to the maximum output power of the solar generator.
• In the event of danger, such as a storm and/or thunderstorm with the risk of lightning, completely disconnect connected devices from the solar generator!
• Position the solar converter in such a way that unhindered access to the on-board socket or to the cable connections is always guaranteed.
• The plug of a connected load should always be disconnected from the solar generator before the solar generator is not used for a longer period of time.
• The solar converter must not be used to feed into the AC grid of house installations.
• Never leave the device unattended during operation.
• The solar converter must not be opened under any circumstances.
• If you notice smoke, unusual noises or smells, switch off the solar converter immediately and completely disconnect it from the connected devices. In these cases, the solar converter must no longer be used.
• Depending on the application situation and consumers of protection class  (with grounding conductor), take measures to protect against electric shock (potential bonding, grounding, earth leakage circuit breaker, etc.).
• Make sure the generator specs match the specs of the device you intend to connect. Otherwise dangerous situations may arise.
• To avoid interference, keep the generator away from TVs, radios, and other devices while charging.
• Keep the generator away from metal objects such as coins, hair clips, keys, etc. to avoid short circuits.
• Do not heat the generator. Do not throw into fire, water or other liquids.
• Keep it away from high temperatures and do not expose it to direct sunlight.
• Technical changes and errors reserved

Important information on rechargeable batteries and disposal

Used batteries do not belong in household waste. As a consumer, you are legally obliged to return used batteries for professional disposal. You can drop off your batteries at the public collection points in your community or wherever batteries of the same type are sold.

• Children can not touch the batteries by hand.
• Do not heat the battery to over 60 °C and do not throw it into fire: risk of fire, explosion and fire
• Do not short-circuit the battery.
• Do not try to open batteries.
• When charging the battery, stay close by and check its temperature regularly.
• Do not subject the battery to any mechanical stress. Avoid dropping, hitting, bending or cutting the battery * In the event of severe overheating, stop charging immediately. A battery that overheats or deforms when charging is defective and must no longer be used.
• When charging the battery, make sure that the polarity of the charging plug is correct. If the charging plug connection is incorrect, the charger is unsuitable or the polarity is reversed, there is a risk of short circuits and explosion!
• Never completely discharge the battery, this shortens its lifespan.
• If the battery is to be stored for a longer period of time, a residual capacity of approx. 30% of the charging volume is recommended.
• Avoid direct sunlight at the storage location. The ideal temperature is 10-20°C.
• Check the charge level regularly every 6-12 weeks and recharge the device to the desired level.

Important information Battery Recycle
This electronic device does not belong in household waste. For professional disposal, please contact the public collection points in your community. Details on the location of such a collection point and any existing quantity restrictions per day / month / year can be found in the information from the respective municipality.
Declaration of Conformity
KIRRON Light Components GmbH & Co KG hereby declares that the product
ISLAND 1500 LIFEPO is in compliance with the following standard EU certificates:
RoHS directive 2011/65/EU+(EU)2015/863 + (EU )2017/2102
CE EMC directive 2014/30/EU
CE LVD directive 2014/35/EU.
KIRRON light components GmbH & Co KG
Zuffenhauser Strafle 83
70825 Korntal- Minchingen
Telefon: +49 (0) 7 11/ 838 896 – 870

Product Details

1. Handle
2. AC Button
3. USB Button
4. AC Output
5. DC lutput
6. PV Anderson Input
7. Power On/Off Button| 8. LCD Display
9. DC Button
10. DC Output
11. Cigar Port Output
12. USB Output
13. USB C Output
14. LED Light Button
15. LED Light
---|---

Technical Data

LCD Display

1. Battery Capacity in %
2. AC OUT
3. USB OUT
4. USB C OUT
5. DC OUT| 6. FAN
7. Charge Input Power
8. Output Power
9. Temperature
10. Error
---|---

Note:

1. It will light up when Power is ON.
2. It will light up when AC ports start work.
3. It will light up when USB ports start work.
4. It will light up when Type-C ports start work.
5. It will light up when DC ports start work.
6. It will light up when the power station temperature over 40°C, or AC output over 600W, the fan start working to cool down.
7. It will show total Charge Input Power When Charging.
8. It will show total Output Power When work with USB/AC/DC OUTPUT.
9. It will light up when the power station temperature over 40°Cor -10°C, turn off the AC output
10. It will light up when the power station is faulty and show the corresponding error code. (Please see page 29 the Error Code).

Error Code & Troubleshooting

| USB short circuit or overload protection
---|---
| QC3.0 short circuit or overload protection
| DC short circuit or overload protection
| AC short circuit protection
| Explain: There is potentially a short circuit inside your device or the power station.
| Troubleshooting:Please plug out the devices firstly, press power button to recover  the function.
| AC overload protection
| Explain:the loading power of the electrical applications over 2000W.
| Troubleshooting:Press the AC button 3s to recover the function.choose our
models >2000W to fit your devices.
| AC inverter over temperature protection
| Explain:The inverter will automatically cut off the output if the temperature over 80°C (176 F)
****| Battery over temperature protection when discharging.
| Explain:The output will be cut off when the battery temperature is over 60°C  (140F)
| Troubleshooting:Press the AC button 2s to eliminate it.let the power station stay for a period of time until temperature down.
| Battery low temperature protection when discharging
| Explain:The output will be cut off when the battery temperature is over -10C (14°F)
| Battery over temperature protection when charging
| Battery low temperature protection when charging
| Charge input over voltage protection
| Battery over voltage protection
| Battery low voltage protection

How To Use:

Note:
The solar power supplies a pure sine wave voltage. This can be used to operate all common electrical devices that correspond to the output voltage of the solar power.
Note:
Use it when charging and output charge in the same time if battery power is enough.
ATTENTION!
Auto shutdown of the outputs when there is no load.

1.Power ON/OFF
Press power on/off button to turn on the power. Press it again to turn off.
Note:
If there is no charging process within 20 seconds, the display switches off automatically to save power.
2. Charge Input
Note:
Fully charge the built-in battery before first use.
The battery can be charged by DC adapter, or using a suitable solar panel (not included in the scope of delivery). or Car Port Charger. The loading time depends on the input source:
2.1 By DC Adapter

• Please connect DC adaptor to household AC socket,
  Connect plug with power DC input .

• Power will in charge and battery icon will twinkle.
  When is full of charge, battery icon will fully light.
  And then please remove adapter in time.

2.2 By Solar Panel (not Included)

• Place solar panel where will get as much direct sunshine as possible.12V-45V /12A , 400 Watt solar panel will use for this power station.

• Plug solar panel Output and Connect Power PV Input and then will start charging.
  

• Connect with the solar,you will see input power on display and battery icon light up, When is full of charge power, battery icon will fully light.

• Please Note: DC input max is 200W, PV Anderson input is 400W. Solar Panel is not include. Please buy Solar Panel together if need.

2.3 By Car Charger

• Connect DC input with Car Charger (5.5 x 2.1 mm)

• Connect the car charger plug of the adapter to the cigarette lighter socket in your car. The charge will starts and show charging on the LCD display.

• Take off the car charger when not use and remove it from power generator.

Note:
We don’t suggest for car charging for long time, it will be too slow. Please charge mainly by DC adapter and Solar Panels.

3. AC Outputs
ATTENTION!!
Only one device may be operated at each 230 V output of the solar converter. The power consumption of all connected devices must not exceed 2,000 watts.
There is also a risk of electric shock when several devices are connected to one socket.

1. Connect electric device to 230V AC socket.

2. Press AC button for 2 seconds to turn on the AC outlets.
   AC Output work and will show AC-OUT on the display .

3. Press AC button again, close AC OUT.

4. USB Outputs

1. Press USB button, and USB icons will on the display.

2. Connect Mobile Phones, Tablet, Iphone…with USB /QC3.0/Type C output to charge your device.

3. Press USB button to close USB outputs.
   Note:
   The power will turns off automatically when no USB charging work within 30s.

4. Remove your device from power generator if not charge.

5. DC OUTPUTS
5.1 DC OUTPUTS
Note:
You need a suitable DC adapter cable(DC 5521) to use the DC outputs.
Your device power Max should < 100W. (If power > 100W will shut off.)

1. Press DC button and DC out icon will on the display.

2. Connect DC adapter cable to the DC output on the power and the desired device.

3. Press DC button again to turn off DC output.
   Note:
   The power will turns off automatically when no DC output work within 30s.

4. Remove your device from power generator if not charge.

5.2 CAR PORT OUTPUTS
Note:
You need a 12V Car charge cable to use the 12V Car Port outputs.
Your device power Max should < 120W. (If power > 120W will shut off.)

1. Press DC button and DC out icon will on the display.

2. Connect Car Charge adapter cable to the Car Port output and your device.

3. Press DC button again to turn off DC output.
     Note:
   The power will turns off automatically when no DC output work within 30s.

4. Remove your device from power generator if not charge.

Customer Service:
KIRRON light components GmbH & Co KG
DE: +49 (0) 711 838896870
Zuffenhauserstrasse 83
D-70825 Korntal-Minchingen
Rev. 1.0 -10.01.2023
KIRRON- www.klc.solar

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>