Sunco WPD Series LED Slim Wall Pack Instruction Manual

Sunco WPD Series LED Slim Wall Pack

Specifications

• Lumen Packages: 11,780 to 19,375 lumens
• Wide and even distribution
• Occupies the same area as a typical metal halide glass wall pack
• High-quality polycarbonate lens
• Rugged die-casting aluminum housing with bronze powder coating
• Integral gaskets to prevent the ingress of external contaminants
• 4-6KV surge protection
• Input Voltage: AC120-277V (50/60Hz)
• Electronic drivers ensure system power factor >90%
• The 0-10V dimming driver is standard
• Light engine configuration includes high-efficiency LEDs
• Color Temperature (CCT) options: 3000K/4000K/5000K selectable
• Minimum Color Rendering Index (CRI): 70
• Selectable Wattage: 125W, 105W, 76W
• Selectable CCT: 3000K, 4000K, 5000K
• Dark bronze finish
• Compliances: WET LOCATION
• Warranty: 5-years limited warranty

Product Usage Instructions

Installation:

1. Select a suitable location for mounting the LED Wall Pack Light.
2. Ensure the mounting surface is sturdy and can support the weight of the fixture.
3. Securely attach the fixture to the mounting surface using appropriate screws or brackets.
4. Connect the electrical wires to the corresponding terminals, following local electrical codes.
5. Adjust the direction of the light by rotating the fixture if necessary.

Operation:

1. Ensure the power supply to the LED Wall Pack Light is switched off before operation.
2. Turn on the power supply.
3. To adjust the wattage and color temperature (CCT), locate the dial on the fixture.
4. Rotate the dial to select the desired wattage and CCT.
5. The LED Wall Pack Light will now operate at the selected settings.

Maintenance:

Regularly inspect the LED Wall Pack Light for any signs of damage or wear. Clean the lens and housing as needed using a soft cloth and mild detergent. Do not use abrasive cleaners or solvents. If any component is damaged, contact customer support for assistance.

FAQ

• Q: Can I install the LED Wall Pack Light in wet locations?
  A: Yes, the LED Wall Pack Light is suitable for wet locations.

• Q: Can I dim the LED Wall Pack Light?
  A: Yes, the LED Wall Pack Light comes with a 0-10V dimming driver as standard.

• Q: How long is the warranty for the LED Wall Pack Light?
  A: The LED Wall Pack Light comes with a 5-years limited warranty.

Introduction

• The WPD series is available in lumen packages from 11,780 to 19,375 lumens with a wide and even distribution. Since WPD occupies the same area as a typical metal halide glass wall pack, it can completely cover unsightly stains.
• A high-quality polycarbonate lens, which work with a high-efficiency light engine to provide superior illumination.
• Available with Photocell.

Features

Construction:

Rugged die-casting aluminum housing with bronze powder coating for durability. Castings are sealed with integral gaskets to prevent the ingress of external contaminants. It has 4-6KV surge protection. Consult factory for Photocell surge ratings.

Electrical:
The Input voltage is AC120-277V (50/60Hz). Electronic drivers ensure system power factor >90%. 0-10V dimming driver is standard.

Optics:
The light engine configuration includes highefficiency LEDs. Color temperature (CCT) option is 3000K/ 4000K/5000K selectable with a minimum CRI of 70.

Product Selectable

Finish:
The standard color is dark bronze

Warranty

5-year limited warranty.

Parameters

• Wattage & CCT Selectable – Dial in the desired lumens and CCT via the dial located in the fixture
• The geometry covers the footprint of a typical HID wall pack, covering any unsightly stains.

Dimension

Photometrics

Electrical Data

Voltage (V)

| Model

XS-WPD-125W-304050K-UV-P

Max. Current (A)

1.04

---|---
120V
208V| 0.60
240V| 0.52
277V| 0.45

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>