Zicooler XD-1588F Desk Fan Instruction Manual

Instruction Manual
Zicooler
Air Circulation Fan
XD-1588FB

Contact email: PXZicooler@gmail.com
Please read this instruction manual carefully before using the product, and keep it properly.

Product Introduction

Attention

• The picture of the instruction manual is for reference only, the specific to the actual product in the packaging box shall prevail.

Part Name

Accessory List

Instruction Manual x1

Method of Use

Operation Panel

1. Make sure the knob switch is in the “0” position before plugging in the power.
2. Plug in the power, the machine into standby mode, clockwise rotation to “0-1-2-3-0-1” wind speed mode cycle. Counterclockwise rotation, “0-3-2-1-0-3” wind speed mode cycle.
3. The upper half circle, the fan runs with left and right automatic head swing; the lower half circle, no left and right automatic head swing.

Basic Parameters

Implementation
Standards| GB 17625.1-2012 / GB 4343.1-2018
GB4706.1-2005 / GB 4706.27-2008

Electrical Schematic

Cleaning and Maintenance and Storage

Attention

• Before cleaning this product, the power must be disconnected.
• Do not use water to rinse the machine body directly.
• Do not use any abrasive tools and solvents that will damage the surface to clean this product, use detergent to clean it and wipe it with a dry cloth in time.
• It is forbidden to disassemble the product for modification. It is recommended to inspect and clean this product regularly to prolong its service life.

Cleaning and Maintenance

1. Before cleaning and maintaining this product, be sure to unplug it and wait for the machine body to cool completely before cleaning operation.
2. Do not use toluene, bleach and other chemical solvents to avoid scratching and corrosion of the body appearance color. If there is tarnish or dirt that cannot be easily removed, it is recommended to clean with a neutral cleaner for tableware.
3. When cleaning the body, please use a soft cloth with neutral cleaner to wipe, and then wipe the residual cleaner with a dry cloth.

Maintenance before Storage

1. The front and rear nets and fan blades can be disassembled according to the reverse order of assembly, wipe clean with a soft cloth moistened with water or neutral detergent, and then wipe thoroughly with a soft dry cloth.
2. Do not rinse the body directly with water to prevent electrical short-circuit or poor electrical conductivity. If not used for a long time, please wipe clean and cover with a plastic bag, and store in a cool and dry place.
3. Before taking out and using, please check whether the whole machine and the power cord are broken, and clean the dust on the body, after the inspection is completed, please carry out a test run, if there is no fault then it can be used normally.

Disassembly & Assembly Method

1. Turn the fan to the front and use a screwdriver to remove the rear net fixing screw; then press the rear net snap by hand to remove the front net.
2. Fan blade is not removable, the body & fan blade can be cleaned with neutral detergent and soft cloth.
3. The front net can be cleaned with water and dried.
4. After cleaning, assemble the front net in the reverse direction of disassembly.

Troubleshooting

according to the disassembly method and clean the fan blades
Motor fan blade is loose| Tighten the fan blade
Motor failure| Please contact customer service by email
No oscillating| Not pressed to the correct function button| Please rotate to the correct function key
Function button malfunction| Please contact customer service via email
Fan blade stuck and stopped| The fan blade is stuck by a foreign object| Turn off the fan power and remove the foreign object

Quality Assurance Card
We sell products with 1 year warranty, if you encounter any problems during use, you can send pictures or videos to our after-sales email: PXZicooler@gmail.com , so that ourengineers can troubleshoot and give you a satisfactory solution within 24 hours.
Caution

1. When this product is used in a commercial place for profit, the guarantee period is reduced by half according to the time limit contained in the guarantee.
2. The guarantee will be lost if the date of purchase is filled in or altered or does not match the actual product.
3. The product accessories and consumable parts are not included in the warranty (such as: packaging materials, user manuals ……).
4. If one of the following circumstances occurs, the product will not be free of charge even during the warranty period.
5. Failure or damage caused by natural or man-made disasters.
6. Failure or damage caused by the relocation or transportation of the machine.
7. The cause of failure occurs outside the body, such as outdoor activities encountered by external forces of failure or damage.
8. Failure or damage to the product due to negligence or use error.
9. Failure or damage caused by unauthorized modification of the product or maintenance by professionals not affiliated with the company.

Safety Warning

Note: Please be sure to read this manual carefully before use. The company reserves the right to explain the manual. Please refer to the actual product appearance. In case of product technology or software upgrade, no notice will be given.
Safety Precautions

1. Moving
   When moving, be sure to stop the machine and unplug it from the power supply.
   Please hold the fan stand or base firmly to avoid falling and injuring people.

2. Power Cord
   Before performing maintenance work or moving the machine, disconnect the power cord from the AC power outlet.
   Do not over-twist, bend or twist the AC power cord as the core may be exposed or broken.
   Do not use an improper AC outlet.
   Do not use the AC power cord provided with this product on any other device.

3. In Use
   Before use, please refer to the voltage indication on the label of the machine body specification.
   Then, determine the voltage that can be provided before use.
   Do not insert fingers or other objects into the front and rear nets during use to avoid danger.
   If the product occurs abnormalities such as abnormal noise, odor, high temperature, irregular rotation of the fan, please stop using it immediately.

4. Warning (If used improperly, electric shock, fire, personal injury, and other damage may occur.)
   Do not use this product in a place where it is easy to tip or unstable.
   Do not use the product in high temperature and humid environment such as bathroom.
   Do not use the product if the power cord is damaged or the power cord plug is loose.
   Do not operate the product if the front net of the fan is not installed or if the rear cover of the fan is loose or falling off.
   Do not allow children or adults who do not understand the instruction manual to operate the product.
   Do not change the power cord without permission, or connect the power cord in the middle or use it in parallel with other electrical appliances.
   Do not place the fan body near water sources.
   Do not disassemble, modify or repair the internal parts without permission.
    Do not climb or sit on the fan.
   Do not store flammable and explosive materials around the fan body, and do not place it near a heat source.
   Do not shower the fan body directly with water.
   Do not turn off the fan by unplugging it directly from the power source.
   Do not over-twist, bend or twist the AC power cord to prevent the cord core from being exposed or broken.
   Do not insert fingers or foreign objects into the fan front net, fan rear cover or running fan blades.
   Do not put hair, fabric, etc. near the fan to avoid danger of being caught.
   Do not use inappropriate AC outlets.
   Do not use the AC power cord provided with this product on any other device.
   Do not spray cleaning fluids or insecticides, etc. on the fan to avoid damaging the plastic surface.
   Do not use outdoors.
   Please do not allow children to touch it to avoid accidents.
   We are not responsible for any injury caused by improper operation.
   When people leave the machine or when the machine is not in use, turn off the power and unplug the power supply to avoid accidents caused by circuit failure.

Harmful Substance Composition Table

Polybrominated Biphenyls (PBB)
Motor| X| ◯| 0| ◯| ◯
Switch Components| X| ◯| 0| ◯| ◯
Plastic Parts| ◯| ◯| 0| ◯| ◯
Power Cord| ◯| ◯| 0| ◯| ◯
Packaging Printing Products| ◯| ◯| 0| ◯| ◯
Hardware| ◯| ◯| 0| ◯| ◯

This form is prepared in accordance with the provisions of SJ/T 11364
O: It means that the content of the harmful substance in all homogeneous materials of the component is below the limit requirement specified in GB/T 26572.
X: It means that the content of the harmful substance in at least one homogeneous material of the part exceeds the limit requirement of GB/T 26572. However, with the existing technology, it is extremely difficult to make the product parts completely free of the above-mentioned harmful substances, and the design will be gradually improved with the subsequent technological progress.
The product’s “environmental use life” is 10 years, and its logo is shown on the left.
The “environmental use life” is valid only when the product is used under normal conditions as described in this manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>