ZICOOLER XD-1855FA Air Circulation Fan User Manual

ZICOOLER XD-1855FA Air Circulation Fan

Product Information

Specifications

• Product Name: Zicooler Air Circulation Fan
• Model: XD-1855FA
• Email: PXZicooler@gmail.com

Part Names

• Front Net
• Fan Blade
• Rear Net
• Knob
• Tie Rod
• Rear Cover
• Upper Column
• Column Tube
• Power Cord
• Lower Column

Accessory List

• Instruction Manual x 1
• Chassis Counterweight Block

Troubleshooting

fan and remove the foreign object

Quality Assurance Card
We sell products with 1 year warranty. If you encounter any problem during use, you can send pictures or videos to our after-sales email: PXZicooler@gmail.com, so that our engineers can troubleshoot and give you a satisfactory solution within 24 hours.

Safety Warning
Note: Please be sure to read this manual carefully before use.
The company reserves the right to analyze the manual. Please refer to the actual product appearance. In case of product technology or software upgrade, no notice will be given.

Safety Precautions

1. Handling: When moving, be sure to stop the main unit and unplug it from the power supply. Please hold the fan column firmly to avoid falling and injuring people.
2. Power Cord: Disconnect the power cord from the AC power outlet before performing maintenance work or moving the unit. Do not over-twist, bend, or twist the AC power cord or the core may be exposed or broken. Do not use an improper AC outlet. Do not use the AC power cord provided with this product on any other device.
3. In Use: Refer to the voltage and frequency markings on the body specification sticker before use, and determine the voltage and frequency that can be supplied before use. Do not insert fingers or other objects into the front and rear grids during use to avoid danger. If the product is abnormal in terms of noise, odor, high temperature, irregular fan rotation, etc., please stop using it immediately.
4. Warning: If used improperly, electric shock, fire, personal injury, and other damage may occur.

Product Usage Instructions

Operation Panel
The operation panel consists of a knob switch and wind speed modes.

Fan Left and Right Swing Head Operation

1. Before plugging in the power supply, please ensure that the knob switch is in the 0 position.
2. Plug in the power. The machine will enter standby mode.
3. Rotate the knob switch clockwise to cycle through wind speed modes 0-1-2-3.
4. If you need to open the left and right swing, press the lever on the back cover.
5. If you need to close the left and right pendulum, lift the lever.

FAQ

• What should I do if the fan does not run?
  Firstly, check if there is power at the power outlet. If not, replace with a powered outlet. Secondly, ensure that the power cord is properly connected. Thirdly, if the fan blades are dirty, remove the front screen and clean them. Lastly, if the motor blades are loose, tighten them.

• How do I troubleshoot motor failure?
  If there is no pendulum head, please press the upper lever on the rear hood. If the lever is not functioning properly, contact customer service via email.

• What should I do if the fan blade gets stuck and stops?
  Power off the fan and remove the foreign object causing the obstruction.

Product Introduction

Attention
The picture of the instruction manual is for reference only, the actual product in the box shall prevail.

Part Name

Accessory List

• Do not insert fingers or foreign objects into the fan front net, fan rear cover or running fan blades. Do not put hair, fabric, etc. near the fan to avoid danger of being caught.
• Do not spray cleaning fluids or insecticides, etc. on the fan to avoid damaging the plastic surface. Do not use outdoors.
• Please do not allow children to touch it to avoid accidents.
• We are not responsible for any injury caused by improper operation.
• When people leave the machine or when the machine is not in use, turn off the power and unplug the power supply to avoid accidents caused by circuit failure.

Troubleshooting

Quality Assurance Card
We sell products with 1 year warranty, if you encounter any problem during use, you can send pictures or videos to our after-sales email: PXZicooler@gmail.com, so that our engineers can troubleshoot and give you a satisfactory solution within 24 hours.

Cautions

1. When this product is used in a commercial place for profit, the guarantee period is reduced by half according to the time limit contained in the guarantee.
2. The guarantee will be lost if the date of purchase is filled in or altered or does not match the actual product.
3. The product accessories and consumable parts are not included in the warranty (such as: packaging materials, user manuals ……).
4. If one of the following circumstances occurs, the product will not be free of charge even during the warranty period.
5. Failure or damage caused by natural or man-made disasters.
6. Failure or damage caused by the relocation or transportation of the machine.
7. The cause of failure occurs outside the body, such as outdoor activities encountered by external forces of failure or damage.

Safety Warning

Note: Please be sure to read this manual carefully before use. The company reserves the right to analyze the manual. Please refer to the actual product appearance. In case of product technology or software upgrade, no notice will be given.

Handling

• When moving, be sure to stop the main unit and unplug it from the power supply.
• Please hold the fan column firmly to avoid falling and injuring people.

Power Cord

• Disconnect the power cord from the AC power outlet before performing maintenance work or moving the unit.
• Do not over-twist, bend, or twist the AC power cord or the core may be exposed or broken.
• Do not use an improper AC outlet.
• Do not use the AC power cord provided with this product on any other device.

In use

• Refer to the voltage and frequency markings on the body specification sticker before use, and determine the voltage and frequency that can be supplied before use.
• Do not insert fingers or other objects into the front and rear grids during use to avoid danger.
• If the product is abnormal in terms of noise, odor, high temperature, irregular fan rotation, etc., please stop using it immediately.

Warning(If used improperly, electric shock, fire, personal injury, and other damage may occur.)

• Do not use this product in a place where it is easy to tip or unstable.
• Do not use the product in high temperature and humid environment such as bathroom.
• Do not use the product if the power cord is damaged or the power cord plug is loose.
• Do not operate the product if the front net of the fan is not installed or if the rear cover of the fan is loose or falling off.
• Do not allow children or adults who do not understand the instruction manual to operate the product.
• Do not change the power cord without permission, or connect the power cord in the middle or use it in parallel with other electrical appliances.
• Do not place the fan body near water sources.
• Do not disassemble, modify or repair the internal parts without permission.
• Do not climb or sit on the fan.
• Do not store flammable and explosive materials around the fan body, and do not place it near a heat source.
• Do not shower the fan body directly with water.
• Do not turn off the fan by unplugging it directly from the power source.

Usage

1. Before plugging in the power supply, please ensure that the knob switch is in the “0” position.
2. Plug in the power, the machine into standby mode, clockwise rotation, to “0-1-2-3” wind speed mode cycle.
3. If you need to open the left and right swing , press the lever on the back cover; if you need to close the left and right pendulum, lift the lever.

Basic Parameters

The following are the design parameters, the actual measured parameters are subject to the product.

Circuit Schematic

Installation Method

Caution
When installing the fan, it is forbidden to plug the power cord into the socket.

1. Chassis Installation
   Align the threaded end of the lower column with the threaded hole in the chassis and turn the lower column clockwise until it is tight. (The same applies to the head unit and column tube installation)

2. Fan Head Assembly Installation
   Align the threaded end of the fan head with the threaded hole in the lower column or column tube and rotate the lower column counter-clockwise by hand holding the fan head assembly until tight.
   (The lower column and column tube can be removed and the fan head attached directly to the chassis for use as a table fan.)

How to Use the Pendulum Head

1. Left and Right Wide Angle Air Supply
   The angle of the left and right pendulum head is automatically adjusted.

2. Pitch Angle Air Supply
   Up and down tilt angle can be adjusted manually.

Cleaning Maintenance and Storage

Attention

• Before cleaning this product, the power must be disconnected first.
• It is forbidden to rinse the machine body directly with water.
• Do not use any abrasive tools or solvents that will damage the surface to clean this product. Use detergent to clean it and wipe it with a dry cloth in time.
• It is forbidden to disassemble the product for modification. It is recommended to inspect and clean this product regularly to prolong its service life.

Cleaning and Maintenance

1. Before cleaning and maintaining this product, be sure to unplug and wait until the electrical body is completely cooled before cleaning operation.
2. Do not use chemical solvents such as toluene, bleach, etc. to avoid scratching and corrosion of the body color. If there is stain or not easy to fall off the dirt, it is recommended to use a neutral cleaner for tableware to clean.
3. When cleaning the body, please use a soft cloth with neutral detergent to wipe, and then use a dry cloth to wipe clean the residual detergent.

Disassembly & Assembly Method

1. Front net disassembly: use a screwdriver to unscrew the net cover fixing screw, turn the front net counterclockwise until it loosens, and remove the front net. (As shown in Figure 1)
2. Please unscrew the fixing cap clockwise or rotate the fan blade counterclockwise to remove the fixing cap and gently remove the fan blade by hand along the axial direction. (As shown in Figure 2)
3. The front net and fan blades can be cleaned with water and dried. (As shown in Figure 3)
4. The body can be cleaned with a neutral detergent and a soft cloth.
5. After cleaning, the front screen, fan blade Assemble in the reverse direction of disassembly.
6. Failure or damage to the product due to negligence or use error.
7. Failure or damage caused by unauthorized modification of the product or maintenance by professionals not affiliated with the company.

Harmful Substance Composition Table

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>