OSSURET BMW X3 E83 Android Car Stereo Instructions
- June 15, 2024
- OSSURET
Table of Contents
- [Customer]
- [Instructions for use]
- Tips and warnings
- Safety Tips
- Machine Reset
- Installation
- Product Dimension
- Back interface diagram
- Harness
- Installation Steps
- “REVERSE/BACK/REAR CAMERA”)
- Wiring method:
- Fixed machine
- Suitable models
- Parameters
- Introduction to basic functions
- Icon Introduction
- Main functions and usage
- Car Setting:
- Common troubleshooting wizard
- Documents / Resources
OSSURET BMW X3 E83 Android Car Stereo Instructions
[Customer]
Dear Customer:
Thanks for buy our car player, it is our honor and pleasure to server you to
using our product. Before using this product, please read this manual very
carefully and keep it properly. Your kindly feed back and support will prompt
us to do the better. Thank you.
[Instructions for use]
For the sake of your safety, please don’t watch the video while driving and operating machine; Please dispatch the volume to clearly while driving to the voice to the outside world. Before operation ,please read this manual and other manual system, understand the use of manual and machine related safety tips and warning signs, after reading in a readily accessible place for ready reference.
- Pay attention to traffic safety in the first place.
- If you meet difficulty in operating the system, please again after he parked his car in aside place.
- Don’t let children operate this machine, lest cause personal injury and damage to the machine
- Please follow the traffic rules when using satellite navigation function to drive.
- Please do not ban the use of electronic equipment or it is forbidden to use open flame surcharges stations, brewery, strong electromagnetic interference region, otherwise may cause danger.
- Don’t maintenance, installation of the machine itself. Under the condition of the plug monotints all or repair the machine, by not trained in electronic equipment or vehicles accessories installation personnel or the lack of experience installation and maintenance of this machine is very dangerous.
- Do not install the machine storage or in direct sunlight place, don’t put it in other harmful material environment, especially the LCD screen, if the installation of the LCD screen is in the air conditioner near the air duct, please keep cool and hot air blows directly to the machine, other wisest may damage the machine, even on the bus or personal injury.
- Please do not use some sharp objects painted screen, don’t use hard objects to press the screen, otherwise will cause damage to display or touch screen.
- In order to guarantee the normal operation of the machine, and prevent the occurrence of fire or get an electric shock, please don’t expose machine in damp air, more can’t liquid drying machine.
Tips and warnings
In order to emphasize the important information in the user manual, please pay special attention to the label when you see. It indicates some important warning and prompt information.
Safety Tips
Please read all instructions before installation, and it is recommended that car audio profession assist all the machine.
This machine is suitable for vehicle-mounted 12V power supply system(there
must be grounding wire), please do not install this machine in a 24V vehicle-
mounted, otherwise it will damage the machine.
Do not repair the power fuse without professional guidance. Improper use of
the fuse will caused mage to the machine and cause a fire.
In order to avoid violating traffic rules, drivers cannot watch videos while
driving and operating machines to avoid unnecessary accidents.
For safety and to ensure the normal use of the product, please invite
professionals to install, disassemble or repair the machine to avoid damage to
the machine and accidents.
For more information, please contact your local professional car audio store.
Please avoid putting this product in humid environment and water to avoid fire
caused by electric shock or other unnecessary damage.
Note: To prevent short circuit, please remember to turn off the car and disconnect the ACC connected to B+ before installation.
Machine Reset
- The first use of the system before or after the replacement battery, the machine must be reset.
- When the machine function is not normal, the machine must be reset.
- Click restore factory settings in system settings interface, make the machine is in the initial state.
- Use a pointed object, press the RESET button on the panel, or click the system RESET in the system settings, the machine will be RESET to turn it off, back to the factory the initial state.
Note: press the RESET button and the system initialization will lose time and set the value before
Installation
-
Screw fixed installation
-
Card position fixed installation
-
Special frame fixed installation
As shown in the figure above, there are three ways to install the machine, please choose one of them according to the actual situation. Of course, you can also re-install the nonradio according to the installation method of the original car radio.
Wiring
Product Dimension
Back interface diagram
Harness
- MIC
- CVBS IN 1
- VIDEO OUT
- SUB WOOFER
- VIDEO IN
- GAUX R IN
- AUX L IN
- AUDIO OUT R
- AUDIO OUT L
- AMP CONT
Installation Steps
How to find the power cord of the car?
First turn the car key to the ACC state. Then regulate the Universal Watch to
the 20Vgear. Connect the black stylus to the power ground (the outer ironclad
of the cigar lighter) and use the red stylus to test each wire of the car.
Normally a car has two wires about 12V(some cars only have one). That is the
positive pole line. How to distinguish the ACC and memory line? Pull out the
car key after you find the two positive pole lines. The memory line is the
electrically charged one after you nu plug the key. * (Lochte Picture 1
How to find the ground wire of the car (negative pole)?
Turn the Universal Watch to the on/off beep gear. Then connect the black
stylus to the power ground (the outer ironclad of the cigar lighter) and use
the red stylus to test each wire except the two power lines. The energized one
is the ground wire(negative pole). Some cars have two ground wires. * (Look
the Picture 2)
How to find the horn line of the car?
Turn the Universal Watch to the on/off beep gear. Connect the black stylus to
any wire except the power cord and ground wire. Then use the red stylus to
test each remaining wire. The energized one is the horn wire. Then use the
same method to find out the other horn lines. *( Look the Picture 3)
How to test whether the unit work properly?
When you get the unit, you’d better test the unit with battery or power supply
before installation. Wire connection method: Twist the red wire and yellow
wire together and then connect them to the positive pole. Connect the black
wire to the negative pole. Then press the switch to turn on the unit and get a
horn to connect to the horn wire. (Two wires connected to the horn are of the
same color. The white wire is supposed to be connected to the positive pole
and the white one with black part connected to the negative pole of the horn.
You can make no distinction between the positive and negative poles of the
horn.) Then test the function of the unit.
How to connect Bluetooth?
Turn on the unit and initiate Bluetooth function of phone, and then search for
the user name of the unit. Click the connect button and the phone will show it
is connected. If you want to play music with Bluetooth, press the function
transition button to switch to Bluetooth mode and then click songs on your
phone. You can also dial numbers on your phone to make a phone call with
Bluetooth.
How to fix the unit ?
Since each car has a different way of fixing the unit and the location of the
screws are different, there is no defined way to fix the unit. You may consult
the fixing method of the original unit. If it was fixed by tightening screws
with the steel angle, you can unload the steel angle of the original unit to
both sides of our unit, then use the electrician tape to tight the steel angle
(since screw hole size is probably unmatched). If the original unit was fixed
with iron frame, you can fix the iron frame of our unitin the car first, and
then push the unit to fasten it. If the size is not fit, you can wrap the unit
with electrician tape to increase the volume of the unit, and then put itin
and fasten it. Or you can think of a better way to fix it, but anyway, you can
fix it.
How to install the navigation antenna?
First you should tighten the screws of the navigation antenna and the unit.
Then you must fix the navigation antenna module in a place that has sunlight
or on the windshield. (That’s very important because poor installation will
affect navigation signals.)
The default factory mode password
Factory mode password: 8888. (Different products, the password may be
different)
The default Bluetooth Pin Code
Bluetooth Pin Code : 0000/1234
Schematic diagram of reversing camera wiring
There is a separately Camera Input, please do not connect to RCA cable.
Here’s the complete steps of camera wiring.
-
Camera power cable: red and black.
Red connection to reverse the positive light, black to reverse the negative light. -
Camera RCA cable: yellow port.
Insert it on the radio rear input cable. It’s a single cable with yellow port with label
“REVERSE/BACK/REAR CAMERA”)
Trigger Cable
- near the radio: the red wire A — NO Need to connect
- near the camera: the red wire B — connects to car’s rear light positive.
When you pull the rear gear, the device will automatically display the rear view image.
- Monitor (Not Induced in the Package)
- Camera Power Source
- Camera (Optional)
Wiring method:
Preparation tools: tape, screwdriver, wire cutters, plastic prying tool,
traction wire .
Step 1: Insert the original accessory camera wire harness into the rear
license plate light hole, and then directly snap it in.
Step 2: Step 2: Remove the trunk lining, pull out the waterproof rubber
ring, use the tow line to pull the camera cable out of the suitcase, insert
the camera wire harness and data connector into the hole of the baffle, and
finally rein stall the waterproof rubber ring.
Step 3: Remove the decorative lining board on the left side of the trunk,
plug the data power integrated extension cable with the camera harness, and
lead out from the rear trim panel along the original car harness.
Step 4: Peel off the sealing strip on the left side door of the rear
seat, route the cable into the rear cockpit, and pull out the data power
integrated plug and the remaining extension cords.
Step 5: Recover the trunk, and insert the extension cord into the gap of
the plastic panel along the rubber strip on the door side, all the way to the
cockpit door.
Step 6: Remove the storage box under the headlights, pass through the top
of the OBD interface, and then connect the wiring interface to the navigator
interface.
NOTE: Whether you are using a rear view camera or not, please connect the rear view wire. Otherwise, your WIFI and Bluetooth signals will suffer!
Fixed machine
- Fix the bracket on the left and right sides of the machine with screws, and adjust the position of the bracket according to the actual installation.
- Screw the machine in the mounting position of the central console of the car.
Suitable models
This car radio is specially used for BMW X3 E83 (2004-2010), the size is: 233 (Top Width)145 (Height)320 (Bottom Width)mm, depth 220 mm, please refer to the compatibility table for suitable models. Please measure your car dashboard size before orders.
NOTE: If your car is with Optical Fiber, you need to buy extra Optical
Fiber box.
NOTE: If your car original radio is with Premium Factory Sound System,
Premium BOSE,) SONY Sound System, On star, or Premium Amplified Systems, the
car radio does not fit !
Parameters
System: Android 10.0
Chipset : 8227L-DEMO
Screen size : 10.1″
Memory: 1GB (RAM)+16GB (ROM)
Screen resolution: 1024600
Mirror link: Android/IOS
Radio chip: MTK
Power output: 445W
Work temperature: -40°C-80°C
Steering wheel control function : Support
Bluetooth version : 4.0
Power amplifier chip: AC7388
Radio Band : FM
Video output : Support
External microphone: support
Maps: Built-in offline maps
WIFI: Support
USB: Double USB interface
Audio format: APE/FLAC/WAV/MP3/WMA etc
Video format : MKV/RMVB/AVI/MP4/MDV etc
Picture format: PNG/JPEG/JPG/GIF/WBMP/BNP etc
Factory setting keyword: 8888
Language:
Chinese/English/French/Italian/Korean/Japanese/Arabic/Spanish/Portuguese/Russian/Turkish/Viet
amuse/Hebrew/Polish/German
Introduction to basic functions
Main interface
Icon Introduction
Machine-Host
Symbol | Operations & Controls |
---|---|
MIC | Built-in microphone hole |
RST | Reset (press with a sharp object) |
Power on the device Press and hold for 3 seconds to power off the device |
Short press repeatedly to mute or unmute
| To main menu
| Return to the previous interface
| Press or hold repeatedly to increase volume
| Press or hold repeatedly to decrease volume
0n screen – APP Icon
Icon | Name | Operations |
---|---|---|
HERE WeGo | Touch to enter offline map | |
PODOFO Voice | Touch to enter Smart Voice to set up | |
PODOFO+ | Touch to enter Smart Voice software | |
Touch to go to Google | ||
DAB+ | Touch to enter DAB+ | |
Car Settings | Touch to enter settings, enter password 8888 for factory |
settings
| Maps| Touch to enter google map online
0n screen – Drop-down list
Icon | Name | Operations |
---|---|---|
Wi-Fi | Turn on/off Wi-Fi | |
Bluetooth | Turn on/off Bluetooth | |
**** | Screen off | Open/Close Screen |
Car Amplifier | Turn on/off Car Amplifier | |
Screenshot | Touch to take a screenshot | |
Car setting | Touch to enter Car setting | |
Clean-up | Touch to clean | |
Video out | Touch to set Video out |
Choose correct Model and Year]
- Car Settings – Factory Settings (passwords: 8888) – Parameter Settings – Protocol settings Oudi – BMW
- Turn off your car and restart
- You can check the can bus “connect” or “disconnect” through “Car Settings – System info”
- If this protocol does not work, please try other BMW models or other brands for BMW, because some protocols maybe do not integrate your steering. Need to turn off the radio each time to activate, you can check the connection status on the “Settings”.
Main functions and usage
Music Player
-
Intelligent navigation
-
Click on the “Intelligent Navigation” icon to enter the navigation state
In the navigation state, only GPS navigation-related functions can be performed on the screen. If you need to do anything else, you need to exit the navigation first. Navigation music function In the network music / super CD/ local music / world broadcast / local radio / Bluetooth music state switch to GPS navigation, can normally enjoy the original state of music, when there is a navigation prompt, the system will automatically switch to navigation voice prompt state. -
Function operation »This machine has the function of touching handwritten input destination query, please refer (o the operation help of navigation into reface for the operation of navigation function.
-
Local music
-
Click the “Local Music” icon to enter the local music playback interface (this machine must have a SD card or USB port and core spending media files) Touch icon description.
-
On the music list, you can play songs that you like to choose from different styles Loop play mode switch
-
prep( oust /next Pause / plays Sound effect setting Rerum to the previous menu
-
Back to the main interface
Video Player
- Click the “Video” icon to enter the video list interface (this machine must have a SD card or USB port and correspond name: meish.mp4 ng media files) > Click on the video and enter the video play interface
- Touch icon description
- Back to the main interface >
- Return to the previous menu
- Pause s pay Previous next.
- Sound effect setting Video scale
Radio
- Local radio
- Click the “local radio” icon to enter the local radio interface
- Touch icon description
- Back to the main interface – Return to the previous menu
- Up / down search station , any radio station be searched the searching will stop
- To the left/ to the right FM switch Save station
Press this icon to select ST/LOC options.
Users can save his favorite radio frequency here. Press the relative column for 3 seconds, the current radio frequency is saved in this place.
Bluetooth
- Bluetooth
- Click on the “Bluetooth” icon to enter the Bluetooth interface
- Touch icon description
- Bluetooth Settings Bluetooth connect : Bluetooth Music Bluetooth call record
- Bluetooth Phonebook : Bluetooth dial keyboard
Bluetooth Music
- Bluetooth Music
- Touch icon description
- ****Previous song Next song Bluetooth Music play
Car audio settings
- Audio setting
- EQ setting.
- Adjust up and down
- Sound field setting
- Drag to adjust the sound field
- EQ setting.
- Default Settings
- Up
- Down
- Left
- right
Steering wheel control studying
Please press and hold a button of the steering wheel button and click the
corresponding icon
Please follow below steps to connect the wires:
- Find your car steering wheel control button signal wires, it is normally located under your driving wheel.
- The signals have two, one gives “+” voltage and another gives GND voltage.
- Check our unit power cable, there is a wire labled “key1″ or ” key1″
- Connect the “+” Voltage wires to the “key1” or “key1l” wires.
- Connect the GND wire to GND wires of our unit.
- Go to the this option to learn the steering wheel control function.
- Press the relative function icon on the unit.
- Press your steering wheel control button and there will be a voltage on our unit to memory.
- Step by step to finalize all the buttons.
Mirror Link Feature for smartphone.
Use the APP named “TIMA” for the smartphone mirror link features.
After you open the APP, you will go to the selection page according to your
smart phone type.
Please follow the steps in the APP according to the instruction displayed.
Car Setting:
This APP is special designed for Car Android Device
System Info
Users can check the unit system information here (The above information is
for reference only and is based on actual configuration).
Factory Settings
Users can change the unit presetting’s here. We do not recommend users to
change any settings here as it may result unrecoverable damages to the unit
(Password: 8888)
Car Settings:
If users want to use the CANBUS to decode the car system do have the
original steering wheel control, air conditioner etc, please contact with the
sellers to buy the suitable CANBUS Decoding Box and make relative changes.
Android Settings
Users Press the “Go to settings” here to go to the android setting mode.
GPS Detection:}
If users can not get the position in the navigation software, users can go
here to check the hardware performance. If users can not find the GPS signal,
please check if the GPS antenna is placed in the right way, make sure the
receiver side is up, the side with stickers is down.
Volume Settings
Users can adjust the volume ratio in different mode here.
Brightness
Usefs can change the brightness of the screen here.
Navigation
Users can select the relative navigation software as his preset one
Other Settings
Float Bar: press this feature on to have the assitive touch point
display on the screen all the time Handbrake: press this on, then the device
will not allow to watch video during driving due to safety reason
Screen Setting: This setting will force the screen in the Horizontal
screen mode
Revers Settins : if you need to have the sound of the unit when you are
reversing the car and enter into reverse camera mode, please click it on
Offline Map—HERE WeGo
(Note: You can also use Google Maps online) In order to use the offline
feature of your device, follow the steps below to set it up.
-
Power on the device and connect the device to the internet via Wifi.
-
Find the APP named HERE WeGo in the main menu.
-
Follow the APP prompts to enter the main map page and find the options menu.
-
Click “Use the app offline” and download your favorite map data in the country list.
-
Click “Use the app offline” and download your favorite map data in the country list.
Supported Additional Devices
(Note: Additional devices are not included in the product and
accessories, you need to purchase additionally! )
Icon | Name | Connection Way |
---|---|---|
External Microphone | RCA MIC Interface | |
DAB+ | USB | |
DVR | USB | |
OBD | Bluetooth | |
Subwoofer | RCA audio output or subwoofer interface | |
Amplifier | RCA audio output interface | |
Video Output | USB | |
U disk | USB |
Thank you again for using our product. If you have further questions, please contact our customer service staff. Product Ul interface or functions may be modified and upgraded from time to time without notice. It is normal if the manual has some discrepancies!
Common troubleshooting wizard
If you encounter the following problems in use, troubleshooting will help you quickly solve the problem, if the problem is still not resolved, it is recommended to contact our service department to help solve.
The system is not started, rearview image reversing the process, the key is invalidThe driving safety of the emphasis on the principle of product design, the car after the preset priorityGPS cannot locateGPS antenna not insertedBoot can not locate and navigateNavigation map blind, some remote mountain or road has not been established in the local area
Phenomenon | Reason | Handle |
---|---|---|
Can not boot | The car key is not inserted into the switch and the | |
switch is not open | Insert the vehicle key and open the door | |
Power line insertion host | Insert power cord | |
May be the fuse of this machine is burned | Replace fuses with the same rated |
current
Touch screen is not allowed| Please press 5 fingers on the main page of the
unit for 20seconds. Users will go to the screen/touch button
calibrate page automatically
Touch screen does not respond| System is dealing with transactions (road
search etc.), a moment,lf the system is not working, you can try
to reset it ,if still can not be resolved, it is recommended to contact our
service department to help solve
The back light of the button is not
working| Please check if the wire labled “ILL” is connected to the front lamp
wire. When the front lamp is on, the unit
back light will be on automatically. Users can also connect this ILL wire to
continues +12V to keep the
button light on always.
Without reversing visual image| No camera installed| Install the camera,
insert the CCD plug of the host
Camera standard is wrong| Replace camera with matching system
Must terminate the reverse action, in order to press the
original car power button to start the system boot
Insert GPS antenna
May be in a number of GPS signal shielding area| Test the car out of a
distance, to observe whether the
recovery of GPS signal, if not restored, please contact
the service department
Please contact the after-sales service department to
confirm the updated map
Fuzzy search can not find the place to
go| First confirm whether the input is correct, and then try to enter the
location of another name, if you can not
find, it may not be in our database, It is recommended to connect WiFi to use
online maps.
The navigation system to the selected
road detour| Navigation system in the road search will consider various
factors, in addition to the distance will consider
the level of road, traffic rules, viaduct, trunk, etc., in short, to
facilitate the drivers in the shortest possible
time to reach the destination.
A blank on the map| It may be too large or too small for navigation scale. Try
to change scale size to see if you can restore the
map display. If it is not resolved, Maybe map data is lost, It is recommended
to connect WiFi to use online
map.
**Thank you for your time.
**
Documents / Resources
|
OSSURET BMW X3 E83 Android Car
Stereo
[pdf] Instructions
BMW X3 E83 Android Car Stereo, BMW X3, E83 Android Car Stereo, Android Car
Stereo, Car Stereo
---|---