EDITOP AP005 Tire Inflator Portable Air Compressor Instruction Manual
- June 15, 2024
- EDITOP
Table of Contents
Smart Air Pump
Instruction Manual
AP-005
TECHNICAL PARAMETER
Charging input voltage: 5V
Working voltage: 1.1V
Maximum power consumption : 60W.
Maximum current: <6A
Maximum inflation flow: 20L / min
Battery capacity: 2000mah x3
LED illumination lumen value: 85LM
Maximum inflation pressure : 150PS!
Pressure unit: PSI, BAR, KPA, KG /om2
Operating temperature: – 20°C – 60°C
Product size: 17069+50mm
Host weight: 5089
A. Preset tire pressure, it wil automatically stop when full.
B. Working light to ensure safety inflation at night
C. When battery is low, the car outlet charging can still be used.
PRODUCT DETAILS
Bicycle adspter- Ball needie
- Swimming circle adapter
- Rubber boat conversion head
INSTRUCTIONS
Connect one end of the air pipe with the air pump ,and screw the other end into the tire valve core . For the French valve core , please connect the adapter
- Intelligent control with LCD display, press the * ” key to activate the power supply and set air pressure on the LCD screen, it will stop inflating automatically in 60 seconds
- Press the “C ” key to select unit of PS, BAR, KPA, AND KG / om2.
- Press “ ” to preset inflating pressure. When set to appropriate pressure value,t will lash for 5 seconds,the automatic setting s completed. Then press the aif pump power “ ” to start inflation.
- When the inflation reaches the set value . the Intelligent control air pump will automatically stop inflation
- Press “SOS”switch to activate SOS emergency call and led light.
- After inflation, pay attention to the temperature of the air pipe, After cooling, quickly screw one end of the air pipe out of the valve core and the other end out of the main engine.
- The charging time of the air pump is 3-5 hours.
LITHIUM BATTERY CHARGING
- Connect the USB charger into charging port
- Wihen ‘” flashes on the air pump, the battery is charging
- It takos about 3-5 hours to fully charge.
FUNCTION DESCRIPTION
POWER ON
Ensure that the battery is fully charged, and long press ” to start
MODE SWITCHING
In the power on state, press the * ” key to switch the mode
[BALL MODE]
The default tire pressure value is: 8PS|
[BICYCLE MODE]
The default tire pressure value s : 50PSI
[MOTORCYCLE MODE]
The default tire pressure value s 2.2 Bar
[CAR MODE]
The default tire pressure value is: 2.58ar
ACCESSORY APPLICATION
[inflatable swimming ring]
[ball inflation]
[bicycle inflation]
RECOMMENDED PRESSURE VALUE OF PRODUC
Inflation pressure value
Bicycle| 12. 14 and 16 inch bicycle tyres| 30-50 Psi
20. 22, 24 inch bicycle tyres6.| 40-50 Psi
27.5, 29 inch bicycle tyres| 45-65 Psi
700C road bicycle split tire| 100-130 Psi
700C road bicycle tube tyre| 120-145 Psi
Motorcycle| Motorcycle and electric motorcycle tyres| 1.8-2.8 Bar
automobile| Small car tyres| 2.2-2.8 Bar
Aall game| Volleyball| 4-5 Psi
Basketball| 7-9 Psi
Rugby| 12-14 Psi
Football| 8-16 Psi
he recommended inflation pressure is for reference only.
Please refer to the requirements of the instruction manual of the inflated
product.
Inflation time
| Filled with 700*25c road vehicle tires /0-120 PSI | Time <4 minutes |
|---|---|
| Fill 26*195 mountain bike tires /0-55 PSI | Time <3.5 minutes |
| Charge 5# football /0-5 PSI | Time <2 minutes |
Note : inflation time is for reference only
MATTERS NEEDING ATTENTION
It s forbicden for children to use the air pumpand place It in a safe place
out of the reach of chicren. Never insert the trachea into the mouth, ears or
eyes of people or animals. ‘o infate. Dort use the ar pump s a oy
It s forbidden to use this gas pump near flammable and explosive liquids and
gases ( such as gas stations ).
During inflation, the high-pressure gas will generate heat. In order to ensure
the good operation of the air pump, the machine must be stopped for 15 minutes
after 5 minutes. of use, 50 that the machine can be used after cooling, so as
o prolong the servic life.
When there is abnormal noise during infation or the temperatre s t0o high,
plesss turn off the machine immediately and allow It to cool for a least 15
minutes, Be carefu to be hot when removing the air pipe.
The product s rain proof, water intrusion and impact proof.
If the sir pump s not used for a fong time, it must be stored n a dry place. I
It s stored for a long time, it Is recommended to use t every six months.
Picase check whether the air pump Is fully charged before use. The special
charger attached to the product must be used for charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>