Sweetcrispy C-2575 Big and Tall Office Chair Instruction Manual

Sweetcrispy C-2575 Big and Tall Office Chair

Product Information

Specifications

• Model: C-2575
• Package List:
  • (A)*1 Backrest
  • (B)*1 Seat Cushion
  • (C)*1 Mechanism
  • (D)*1 Leg
  • (E)1L 1R Armrests
  • (F)*1 Gas Lift
  • (G)*1 Lift Cover
  • (H)*5 Casters
  • (I)4 Bolts M620mm
  • (J)8 Bolts M630mm
  • (K)*8 Plastic Caps
  • (L)*1 Wrench

Product Usage Instructions

• Step 1: Assembling the Base and Casters
  Turn the Base (D) upside down, then use both hands to press the Casters (H) into the holes at the end of each Base Leg.

• Step 2: Attaching the Gas Lift
  Insert the Gas Lift (F) into the center hole of the Base, and place the Lift Cover (G) over the Gas Lift.

• Step 3: Attaching the Mechanism and Seat Cushion
  Using the Wrench (L), attach the Mechanism (C) to the Seat Cushion (B) with Bolts (I)*4. Make sure the FRONT direction of the Mechanism (C) and Seat Cushion (B) are the same.

• Step 4: Attaching the Armrests
  Using the Wrench (L), attach the Armrests (E)1L1R to both sides of the Seat Cushion (B) with Bolts (J)*4.

• Step 5: Attaching the Backrest
  Tilt the Backrest (A) down. Using the Wrench (L), attach the Backrest (A) to both sides of the Armrests (E)1L1R with Bolts (J)*2.

• Step 6: Finalizing the Assembly
  Rotate the Backrest (A) up and use the Wrench (L) to fully tighten it to both sides of the Armrests (E)1L1R with Bolts (J)2. Adjust the balance on each side of the Chair, and fully tighten all the Bolts. Press the Plastic Caps (K)8 into the screw holes of each side to cover them.

Safety Information:

• Sit in the center of the chair, with your back to the backrest.
• Do not sit at the front edge of the chair.
• Do not stand on the chair.
• Do not use the chair with more than one person.
• Do not push the chair around when a person is sitting in it.
• Do not push down on the backrest when a person is reclined.
• Do not place all your weight on only the backrest.

Maintenance Instructions:

• Before using the chair, check to ensure that all bolts are fully tightened.
• Lubricate all parts and tighten all bolts every 6 months or whenever needed.

How do I deodorize the leather on the chair?
To deodorize the leather, leave the chair in a shady area outside for 1-2 days.

How often should I re-tighten the bolts?
Re-tighten the bolts every 6 months using the enclosed allen-key. Do not use an electric drill as it can damage the chair. Please re-tighten bolts manually.

Package List

Assembly Instruction

1. Turn the Base (D) upside down, then both hands are forced at the same time to press the Casters (H) into the holes at the end of each Base Leg.

2. Insert the Gas Lift (F) intothe center hole of the Base, the Lift Cover (G) should be placed over the Gas Lift.

3. Using Wrench (L), attach Mechanism (C) to the Seat Cushion (B) with Bolts (I)*4.

4. Turn the Seat Cushion (B) upright and align the center hole of the Gas Lift, then push the Seat down ontothe lift firmly until the connection is secure.

5. Using Wrench (L), attach Armrests (E)1L1R to both sides of the Seat Cushion (B) with Bolts (J)*4.
   NOTE:
   The Bolts only need to be screwed in 50%.

6. Tilt the Backrest (A) down. Using Wrench (L), attach Backrest (A) to both sides of the Armrests (E)1L1R with Bolts (J)*2.
   NOTE:
   The Bolts only need to be screwed in 50%. And make sure the screw holes are in the correct position.

7. Rotate the Backrest (A) up. Using Wrench (L), attach it to both sides of the Armrests (E)1L1R with Bolts (J)*2.
   NOTE:
   The Bolts only need to be screwed in 50%. And make sure the screw holes are in the correct position.

8. Adjust the balance on each side of the Chair, and 100% tighten all the Bolts.

9. Press Caps (K)*8 into screw holes of each side.

10. Finish the installation.

CAUTION:

• Before using the chair, check to ensure that all bolts are fully tightened.
• Lubricate all parts and tighten all bolts every 6 months or whenever needed.

To deodorize the leather leave the chair in a shady outside for 1-2 days.

For longer use

1. Re-tighten bolts every 6 months by using the enclosed allen-key.
2. Using an electric drill can damage the chair. Please re-tighten bolts manually.

Safety Information

1. Sit in the center of the chair, with your back to the backrest
2. Do not sit at the front edge of the chair
3. Do not stand on the chair
4. Do not use the chair with more than one person
5. Do not push the chair around when a person is sitting in it
6. Do not push down on the backrest when a person is reclined
7. Do not place all your weight on only the backrest

FAQ’s

How do I deodorize the leather on the chair?

To deodorize the leather, leave the chair in a shady area outside for 1 and 2 days.

How often should I re-tighten the bolts?

Re-tighten the bolts every 6 months using the enclosed allenkey. Do not use an electric drill as it can damage the chair. Please retighten the bolts manually.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>