ZKYMZL DMX512 Mini Gobo Moving Head Light User Manual
- June 15, 2024
- ZKYMZL
Table of Contents
ZKYMZL DMX512 Mini Gobo Moving Head Light
CAUTION! Keep this device away from rain and moisture!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INITIAL
STAZKYMZL-LOGORT – UP!
Please read the instructions carefully before use
Thank you for using our gobo moving head light
Note: This manual contains important information
Installation and operation according per manual Please keep this manual
properly Start-up steps for the various modes
Auto model
- Press MENU to find SLnd, and press ENTER twice to start the player
- After starting the automatic play program, press up key to fine shnd, press ENTER key
- Then press up key or down key to select sho-3, and then press
- Enter key to switch the program play effect.
Sound model
- Press Menu to find Sound, then press Enter, and then press up or down to find On and Enter to start Voice Player.
- Note: The speech player must be closed before other players can be started
Master From Machine mode
- Set the host to “Auto Mode” or “Voice Mode”in the same steps as 1 or 2
- The slave is set to “AOOt”, operating steps “ENTER” key
Control model
- Press the “MENU” button to find “Addr”, then press the “ENTER” button and then press the “up” or “DOWN” button
- Find the same “DMX” address, press the “MENU” button, note the DMX192 DMX240 controller, etc.) The DMX address code is generally set to the 16 decimal system, that is, add 16 to the address value of the previous one. For example: The address code of luminaire #1 is “d001”. The 2 light address code is 1 + 16 = 17, i.e. the “dO17” No. 3 light address code is “d033”)
- Signal connection: connect the controller DMX output to the DMX input of lamp 1 with signal line, and connect the DMX output of lamp 1 to the DMX input of lamp 2 to connect No.4, No.5…
“Technical parameters”
- Voltage AV100-240V 50/60HZ
- fuse; 3А
- Channel 9/11CH, control model ROM mode DMX512 Automatic run, music control, master
- 8 gobos+8 colors Manual focus
- X:570°Y:270°
- NG 3.2kg
- Internal box size 332223CM
Packing instructions
“When you receive the device, open the packaging and check that the contents are complete and intact. If not, please notify the carrier immediately and keep the packaging. If damage is indicated, keep the packaging and all Packing materials for safe transport to the equipment”
- 1 light
- 1 power cord
- 1 manual
- 1 bow mount
- 2 hex screws
- Control button MENU- UP DOWN ENTER)
- Display 3.DMX In 4DMX Out 5.Power interface 6.Fuse 7.Fan heat dissipation
Safety instructions and operating instructions
After the power is connected, the display shows “rst”, the wiggling headlamp
is set to detect, does not work, and then connects “dmx out” to “dmx in” of
the next light and in turn to the “dmx in” of the last light
Safety measures
- The floor operated seat must be used.
- To avoid fire or electric shock, do not expose the device to rain or moisture, and make sure there are no flammable objects during operation.
- Install the device in a well-ventilated place at least 50cm away from any surface to ensure that the ventilation duct is not blocked.
- Disconnect the device from the power supply before carrying out any work or maintenance
- The ambient temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Do not operate the device at a higher temperature.
- In case of breakdown, do not repair the device by yourself, because you should stop using the device immediately. Improper maintenance can lead to damage and failure. Please contact Technical Support for approval. For repairs or replacements, use only the same accessories as the original parts to ensure that the power cord does not become blocked or damaged.
- Lights and lanterns for decorative purposes only. not suitable for ordinarv household lighting.
- Spare fuse: Disconnect the device from the power supply and remove the fuse seat with a screwdriver. Remove the blown fuse, replace the same features and connect the device to the power supply.
- Warning: If the fuse still burns after replacing it, stop using it. See below for further instructions.
- Please contact customer service, continued use may cause serious damage.
- Fix the device to the bracket with screw holes to ensure that the device is securely fixed to prevent vibration and movement during operation, and start to check whether the structure of the supporting device is strong enough to at least 10 times the weight of the device, please read this manual carefully before operating this product.
- product scrap; This sign indicates that the product must not be thrown in our household waste. To protect the environment and human health, waste is recycled in a responsible manner to
- support the sustainable reuse of resources. For information on recycling used devices, go to Device manual collection point or contact the retailer where you purchased the product who arranges for the ecological recycling of the product.
Description Of The Mounting Bracket Steps
Note: The package does not include the hook bracke.
Parameter declaration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>