DIGITEK DSL-25W RGB Handheld RGB LED Light Wand with Barn Door Instruction Manual
- June 15, 2024
- DigiTek
Table of Contents
DIGITEK DSL-25W RGB Handheld RGB LED Light Wand with Barn Door
Handheld RGB LED Light Wand with Barn Door
In order to bring you a better experience, Please read this Manual carefully before using the product and Keep it properly for Future Reference.
Function Description
OPERATION PANEL
How to operate
-
Tum the Light ON and OFF : Press the ON/OFF Key for 2 Seconds to Tum ON the Light & Press the ON/OFF Key for 2 Seconds to Tum OFF the Light.
-
Press the ‘Function Selection’ button to switch between the 3(Three) modes of ‘CCT/HSI/FX’ (Special Effects)
-
In CCT Mode, press the Up/Down key to adjust the color temperature value changes from 2700-7500K. Brightness+/-‘ key to adjust the Brightness, the Brightness Value varies between 1-100%
-
In HSI mode, press the Up/Down Key to select the submenu and press the Brightness’+/-‘ key to adjust the value.
HSI : Hue, Saturation & Intensity. -
In FX mode, press the Up/Down Key to select the Mode, Short Press the ‘Brightness’+/-‘ key to adjust the Sub Mode and Long Press the ‘Brightness’+/-‘ key to adjust the Brightness
-
There are 39 modes in 14 categories:
Remote control instructions
The working frequency band of the remote control is 433MHz. It can only be
used by pairing before use. Only one remote control can be memorized, and the
last paired one will cover the previous remote control.
Pairing method: Within 5 seconds of turning on the light for the first time
after installing the battery, or within 5 seconds of turning on the light for
the first time after plugging in the adapter, short press the pairing button
on the remote control, and the light flashes to indicate successful pairing.
Remote control key description
- Turn on the lights
- Turn off the lights
- pairs
- Up key
- Main mode switch
- Left button
- right click
- down keys
- CCT working mode
- HSL working mode
- Hue adjustment
- Color Saturation Adjustment
- Brightness adjustment
- FX effects mode
- Color Light Cycle
- Flash
- Thunder Lightning
- Laser Lights
- Bad bulbs
- TV
- Fire
- candles
- Fireworks
- Police lights
- Ambulance
- Fire department
- Music Mode
- SOS
Remote control operation instructions
- Press the ON key to tum on the light, and press the OFF key to tum off the light M key CCT/HSI/FX mode switch.
A pair of color temperature modes
- Press the CCT key, the dual color temperature mode, continue to press the CCT key to switch the color temperature 2700K, SSOOK, 7500K.
- Press up/down color temperature adjustment, adjustment range: 2700-7500K, in units of 100.
- Press left/right to adjust the brightness, the adjustment range: 1-100%.
2 Color light mode setting
- Press HSL key for color light mode, press H to select hue adjustment, and press left/right to adjust hue value.
- Press the S key to select Color Saturation Adjustment , and press the left/right color saturation value to adjust.
- Press L key to select llluminance Adjustment , and press the left/right illuminance value to adjust.
Three FX effects mode settings
Press the FX key to switch to the special effect mode, and directly press the
special effect mode shortcut key to enter the corresponding special effect
mode. Enter the special effect mode, press to select the previous or next
mode, press to select a sub mode, and tong press to adjust the brightness
value.
Precautions for use:
- Battery charging method: After the battery is installed in the fill light rod card position, you can directly use the DC power supply to connect the rod light to charge the power supply, and the display screen shows the charging status; of course, you can also use it while charging.
- The shading plate can be removed or installed. The factory standard is the installed state •
- If it is not used frequently, please charge it every two months to avoid battery damage;
- If there is water or solution entering the product, please disconnect the power supply in time and place the product in a dry place, and then use it after it is completely air-dried;
- Children under the age of 14 should be used under adult supervision.
- For normal fixed use or indoor use, no external battery is required, and it can be directly connected to the power adapter to work; it can also be used wirelessly by installing the NP-F750 battery.
- Do not use the NP-F750 battery without certification and safety regulations.
For any query please contact :
IMS Mercantiles Pvt. Ltd. 704, Ring Road Mall, Outer Ring Road, Near Deepali
Chowk, Sector-3, Rohini, Delhi – 110085 Tel.: 91-11-47074444 mail:
support@digitek.net.in
Website :www.digitek.net.in