Govee H6087 RGBIC Smart Wall Sconces User Guide
- June 15, 2024
- Govee
Table of Contents
Govee H6087 RGBIC Smart Wall Sconces
In the Box
- Fixture Light X 4
- Power Adapter
- Control Box
- Cable Clip x 5
- Power Cable X 3
- Mounting Buckle X 4
- Screw Kit X 10
- Chisel
Before Installation
Step 1
Proper up the 4 fixture lights to check if they are working
- Extract the control box cable into the IN port of the first fixture light.
- Connect with the remaining 3 fixture lights in a series using the connecting wires.
- Attach the control box cable with the power adapter and plug it into the power. Disconnect from power before installing on the wall.
Step 2
- Select a suitable installation area on the wall. Confirm whether the light-emitting surface faces up or down since the surface should be in the same direction as the arrow inside the bracket points…
During Installation
- The mounting bracket can be installed in two ways:
Step 1
- Remove the adhesive film of the mounting bracket stick it on the wall and long press for 10s.
Step 2
- Select a suitable installation area on the wall and use an electric drill to make holes for attaching the mounting brackets.
- Insert a plastic screw cap into each hole. Next, align the mounting brackets with the drilled holes and screw caps (making sure the arrow printed inside each bracket is pointing up), and screw the brackets into the wall.
Note: If you need to remove the fixture light from the wall, use the included chisel to detach.
Watch the video tutorial
- Search for Wall Sconces on YouTube or Amazon.
- Snap the fixture lights onto the mounting bracket, making sure to slot the connecting wires through the spaces on the side of each bracket.
Step 2
- Plug into power.
- Use the cable clip to fasten the connecting wires for better cable management.
Govee Home App
- For FAQs and more information, please visit www.govee.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>