BLACK DECKER BDINF12C 12V DC Multipurpose Inflator Instruction Manual

BLACK DECKER BDINF12C 12V DC Multipurpose Inflator

Product Information

Specifications

• Model: BDINF12
• Main power switch
• LCD display
• Toggle button mode
• Pressure setting buttons
• Handle
• High-volume pump inflate connection
• High-volume pump deflate connection
• High-pressure hose
• Universal valve adapter
• High-volume hose
• Tapered nozzle
• 12V DC vehicle connector
• Cord retainer
• Accessory storage

Product Usage Instructions

Safety Instructions

Please read all safety warnings and instructions carefully before operating the product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage:

• DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.
• WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
• (Used without a word): Indicates a safety-related message.
• NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

Intended Use

Your BLACK+DECKER inflation station is designed to be used in most vehicles from the standard 12 Volt socket to inflate car and bike tires, balls, rafts, air mattresses, swimming pool floats, etc. This product is intended for household, consumer use only.

Warnings:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. Keep the case dry at all times.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not place near any heat sources such as radiators, heaters, stoves, or other appliances that generate heat.
9. Ensure the power cord is undamaged. Do not use the product if the power cord is damaged.
10. Only use attachments and accessories specified by the manufacturer.
11. Do not operate the inflator with wet hands.
12. Do not allow children to use or play near the inflator.
13. Before inflating, ensure the item to be inflated is clean and free from any sharp objects that may puncture it.
14. Do not operate the inflator on a high shelf or surface. Operate at ground or bench level only.

General Safety Rules:

Follow these general safety rules to ensure safe use of the product:

• Use the product only with the specified voltage (12V DC).
• Use the product only for its intended purpose.
• Do not use the product if the power cord or plug is damaged.
• Do not pull or carry the product by the power cord.
• Do not unplug the product by pulling on the power cord. Grasp the plug and pull to unplug it.
• Do not use the product if it has been dropped, damaged, or immersed in water.
• Do not operate the product with a damaged power cord or plug.
• Do not use the product outdoors during a lightning storm.
• Do not operate the product with wet hands.
• Do not immerse the product in water or other liquids.
• Do not overreach. Keep proper jogging and balance at all times.
• Keep the product away from heat sources and flammable materials.
• Ensure proper ventilation when using the product.
• Do not use the product if it is not working correctly or has been damaged.

FAQ:

Q: Where can I find answers to my questions or get support for my BLACK+DECKER purchase?

• A : You can visit our website at http://www.blackanddecker.com/instantanswers. for instant answers and support.
• If you don’t have access to the internet, you can call 1-800-544-6986 from 8 am to 5 pm EST Mon. – Fri. to speak with an agent. Please have the CATALOG NUMBER available when you call.

Q: How do I register my new product?

• A: To register your new product, visit our website at www.BlackandDecker.com/NewOwner .
• If you would like to register your new product, please visit www.BlackandDecker.com/NewOwner.
• To register your new product, visit the website www.BlackandDecker.com/NewOwner.

Definitions Safety Alert Symbols and Words

• This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.
• DANGER: Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.
• WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. (Used without a word) Indicates a safety-related message.
• NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

1. Main power switch
2. LCD
3. Mode toggle button
4. Pressure setting buttons
5. Handle
6. High-volume pump inflate connection
7. High-volume pump deflate connection
8. High-pressure hose
9. Universal valve adapter
10. High-volume hose
11. Tapered nozzle
12. 12V DC vehicle connector
13. Cord retainer
14. Accessory storage

• WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
• WARNING: To reduce the risk of injury, read the instruction manual.

INTENDED USE

• Your BLACK+DECKER inflation station is designed to be used in most vehicles from the standard 12 Volt socket to inflate car and bike tires, balls, rafts, air mattresses, swimming pool floats, etc. This product is intended for household, consumer use only.
• WARNING! Read all instructions before operating the product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WARNINGS:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. Keep the case dry at all times.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the unit when lightning is in the area or when the unit is not in use.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Do not expose to dripping or splashing.
    • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
15. Do not operate near flammable materials, fumes, or gases.
16. Do not disassemble a product, no user-serviceable parts. Incorrect reassembly may result in a risk of electric shock or fire.
17. Provide adequate ventilation and refrain from placing items on or around the product during operation.
18. Keep this product out of the reach of children.
19. Since the vibration produced by the inflator may cause it to “walk”, do not operate on a high shelf or another surface.
    • Operate at ground or bench level only.

GENERAL SAFETY RULES

• KEEP THE WORK AREA CLEAN. Cluttered areas and benches invite injuries.
• CONSIDER THE WORK AREA ENVIRONMENT. Don’t expose power tools to rain. Don’t use power tools in damp or wet locations. Keep the work area well-lit. Do not use tools in the presence of flammable liquids, dust, or gases.
• GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, and refrigerator enclosures.
• KEEP CHILDREN AWAY. Do not let visitors contact the tool or extension cord. All visitors should be kept away from the work area.
• STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-up places — out of reach of children.
• DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was intended.
• USE RIGHT TOOL. Don’t force small tools or attachments to do the job of a heavy-duty tool. Don’t use tools for purposes not intended.
• DRESS PROPERLY. Do not wear loose clothing or jewelry.
• They can be caught in moving parts. Rubber gloves and nonskid footwear are recommended when working outdoors. Wear a protective hair covering to contain long hair.
• USE SAFETY GLASSES. Also, use a face or dust mask if the operation is dusty.
• DON’T ABUSE CORD. Never carry the tool by cord or yank it to disconnect from the receptacle. Keep cord from heat, oil, and sharp edges.
• SECURE WORK. Use clamps or a vise to hold the work. It’s safer than using your hand and it frees both hands to operate the tool.
• DON’T OVERREACH. Keep proper footing and balance at all times.
• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.
• Inspect tool cords periodically and if damaged, have them repaired by an authorized service facility.
• Inspect extension cords periodically and replace them if damaged. Keep handles dry, clean, and free from oil and grease.
• DISCONNECT OR LOCK OFF TOOLS when not in use, before servicing, and when changing accessories, such as blades, bits, and cutters.
• REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.
• AVOID UNINTENTIONAL STARTING. Don’t carry a tool with your finger on the switch. Be sure the switch is off when plugging in.
• EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current product. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
• OUTDOOR USE EXTENSION CORDS. When a tool is used outdoors, use only extension cords intended for use outdoors and so marked.
• STAY ALERT. Watch what you are doing. Use common sense. Do not operate the tool when you are tired.
• CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by the authorized service center. Do not use a tool if the switch does not turn it on and off.
• DO NOT OPERATE portable electric tools near flammable liquids or in gaseous or explosive atmospheres. Motors in these tools normally spark, and the sparks might ignite fumes.

ADDITIONAL SAFETY WARNINGS FOR YOUR INFLATOR WARNING: FOR HOME AND CAR USE ONLY:

• Inflate bike tires, balls, rafts, swimming pool floats, air mattresses, and more in and around the home.
• The recommended maximum continuous duty at 65 psi is 2 minutes on with 5 minutes off.
• WARNING: RISK TO BREATHING.
• The compressed air from your inflator is not safe for breathing. Never inhale air from your inflator or from a breathing device connected to the inflator.
• WARNING: RISK OF BURSTING.
• Too much air pressure causes a hazardous risk of bursting.
• Check the manufacturer’s maximum pressure rating for objects being inflated.
• Do not leave the inflator running unattended. It could burst tires or other items.
• Use a tire gauge to check the tire pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure.

WARNING: RISK OF UNSAFE OPERATION.

• Do not modify or attempt to repair. Never drill into, weld, or make any modifications to the inflator or its attachments.
• Operate only with the accessories included or air handling parts acceptable for not less than 160 psi. The use of any accessory not recommended for use with this tool could be hazardous.
• Never “horseplay.” High-pressure air is dangerous. Don’t direct airflow at yourself or others.
• WARNING: Always leave the valve adaptor lever open when not in use.

WARNING: RISK OF FIRE:

• The inflator can become hot during use. Allow the inflator to cool for 30 minutes before storing it away.
• CALIFORNIA PROPOSITION 65 WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling

LIQUID CRYSTAL DISPLAY FLUID (FIRST AID MEASURES)

If liquid crystal comes in contact with your skin:

• Wash the area off completely with plenty of water. Remove contaminated clothing.

If liquid crystal gets into your eye:

• Flush the affected eye with clean water and then seek medical attention.

If liquid crystal is swallowed:

• Flush your mouth thoroughly with water. Drink large quantities of water and induce vomiting. Then seekmedical attention.
• The label on your tool may include the following symbols. The symbols and their definitions are as follows:

INTENDED USE

Your BLACK+DECKER inflation station is designed to be used cordless or in most vehicles from the standard 12 Volt socket to inflate car and bike tires, balls, rafts, air mattresses, swimming pool floats, etc.
This product is intended for household, consumer use only.

ASSEMBLY

HOSE AND CORD STORAGE

• Wrap the 12V DC cord around the cord retainer 13 and snap the 12V DC connector 12 into its storage location on the cord retainer.
• The high-pressure hose 8 is located in a storage channel around the face of the unit. Open the lever on the valve adapter 9 and slide the adapter over the nub 15 inside the channel. Close the lever to latch the adapter to the nub.
• The accessories are stored on the face of the unit inside the accessory storage area 14.
• The high-volume hose 10 is stored around the edge of the unit and snaps into position at both ends.

FITTING THE ACCESSORIES

Universal valve adapter (Fig. B)

• Your inflator is supplied with the standard tapered nozzles ( 15 and 16 ) and the needle inflator nozzle 17, located on the front of the unit.
• To use the universal valve adaptor 9, make sure the lever is in the up position.
• Place the valve adapter over the stem of the inflator needle or tapered nozzle.
• Press the lever 18 on the valve adapter down to lock it in place.
• Place the inflation needle or tapered nozzle into the item to be inflated.
• NOTE: Always make sure that the lever is in the up position when not in use. Operate your inflator only with the universal valve adaptor or with the included nozzles.
• NOTE: Make sure the universal valve adapter is firmly locked in place before turning the inflator on.

High-volume hose (Fig. C)

• Remove the high-volume hose 10 from the storage location.
• Line up the notches 19 of the hose with the nubs 20 of the high-volume pump inflate connection 6.
• Then, slide the hose on and twist counter-clockwise to secure.
• To remove, twist the hose clockwise and slide the hose off.
• Many inflatables have an internal flap that prevents air loss during inflation, especially air mattresses. Unless this flap is displaced by the nozzle the inflatable will not inflate.
• Push the nozzle firmly into the valve to make sure that you push this flap out of the way.
• WARNING: Risk of Bursting. Excessive air pressure may cause a hazardous risk of bursting or personal injury. Check the manufacturer’s maximum pressure rating for items being inflated.
• NOTE: If the pressure rating for the item being inflated is above 100 psi, note that the maximum run time is 10 minutes, leave to rest for 20 minutes before reusing.

OPERATION

• WARNING: Do not operate the inflator when the car engine is running.
• NOTE: Make sure that your 12 Volt accessory socket is live.
• On some vehicles, the accessory socket may only become life when the ignition key is in the accessory position.

Switching on (Fig. D)

• WARNING: Risk of Bursting. Do not leave the unit running unattended. Overinflation of tires and other items could result in serious injury and property damage.
• Always fully extend the 12V DC cord before each use.
• Connect the 12V DC adapter 12 to your vehicle’s 12 V accessory socket.

To turn on high-volume

• The high-volume hose is meant to be used for objects that hold large amounts of air, such as air mattresses, rafts, and swimming pool floats.
• NOTE: The high-volume mode DOES NOT have an auto shut-off feature.

1. Attach the high-volume hose 10 to the high-volume pump inflate connection 6 as described in the “High volume hose” section.
2. Insert the hose, or its tapered nozzle 11 into the object being inflated.
3. Press the high-volume side of the main power switch 1, indicated by the air mattress symbol 21.
4. To turn it off, push the power switch to the center position.

To turn on high-pressure

The high-pressure hose is meant to be used for objects that need more air pressure, such as tires and basketballs.

1. Remove the high-pressure hose 8 from the storage.
2. Attach a nozzle as described in the “Universal valve adapter” section.
3. Insert the nozzle into the object being inflated.
4. Press the high-pressure side of the main power switch 1, indicated by the tire symbol 22.
5. To turn it off, push the power switch to the center position. Figure D

Deflate using the high-volume hose (Fig. E)

WARNING: Beware of objects being ejected.

When deflating, large amounts of air will exit the high-volume pump inflate connection 6. Ensure the high-volume pump inflate connection is not pointed at anyone or anything.

1. Remove the high-volume hose 10 from the storage location.
2. Line up the notches 19 of the hose with the nubs 23 of the high-volume pump deflate connection 7. Then, slide the hose on and twist counter-clockwise to secure.
3. Insert the hose, or its tapered nozzle 11 into the object being deflated.
4. Press the high-volume side of the main power switch 1, indicated by the air mattress symbol 21.
5. To turn it off, push the power switch to the center position.
6. To remove the hose, twist the hose clockwise and slide the hose off.

Setting the automatic shut-off pressure

NOTE: The LCD will only show inflation pressures when the inflator is being used. In both inflation and pump mode, the unit will show battery status.

1. To switch between the different units (psi, bar, or kPa), press the mode toggle button 3 until the required units are displayed.
2. Press the – or + pressure setting buttons 4 until the required pressure is displayed.
3. After 3 seconds the display will flash and return to a reading of “0.0”. This is normal.
4. Connect the universal valve adaptor and accessories, if required, to the item to be inflated, making sure that the lever of the valve adaptor is in the down position to lock it in place.
5. To start the inflator press the main power switch 1 on the side of the tire symbol 22.
6. When the item to be inflated has reached the preset value the unit will automatically turn off.
   • NOTE: You may notice the actual pressure reading may drop after a couple of seconds. This is normal.
7. To stop the inflator at any time, press the main power button back to the center position.

• NOTE: If the main power switch is turned off, all settings will be lost and will need to be reentered. This is a safety feature to prevent the risk of items OVER INFLATING.

USING THE INFLATOR AS A PRESSURE GAUGE

1. Connect the universal valve adaptor 9 to the item to be checked.
2. Press the main power switch 1 on the side of the tire symbol 22
3. The LCD will display the item’s pressure.
4. After checking, press the main power button back to the center position and return the air hose to the storage location.

MAINTENANCE

• Use only a dry cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
• IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance, and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

ACCESSORIES

• Recommended accessories for use with your appliance are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.
• WARNING: The use of any accessory not recommended for use with this appliance could be hazardous.

SERVICE INFORMATION

• All BLACK+DECKER Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
• Whether you need technical advice, repair, or genuine factory replacement parts, contact the BLACK+DECKER location nearest you. To find your local service location, call: 1-800-544-6986 or visit www.blackanddecker.com

LIMITED TWO-YEAR HOME USE WARRANTY

• BLACK+DECKER warrants this product to be free from defects in material or workmanship for a period of two to 2 years following the date of purchase, provided that the product is used in a home environment. This limited warranty does not cover failures due to abuse, accidental damage, or when repairs have been made or attempted by anyone other than BLACK+DECKER and its Authorized Service Centers. A defective product meeting the guarantee conditions set forth herein will be replaced or repaired at no charge in either of two ways:
• The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges.
• Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to take or send the product (prepaid) to a BLACK+DECKER-owned or authorized Service Center for repair or replacement at BLACK+DECKER’s option. Proof of purchase may be required. BLACK+DECKER-owned and authorized service centers are listed online at www.blackanddecker.com.
• This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest BLACK+DECKER Service Center. This product is not intended for commercial use, and accordingly, such commercial use of this product will void this warranty. All other warranties, express or implied, are hereby disclaimed.
• LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country-specific warranty information contained in the packaging, call the local company, or see the website for such information.
• FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544- 6986 for a free replacement.
• Imported by Black & Decker (U.S.) Inc., 701 E. Joppa Rd. Towson, MD 21286
• BlackandDecker.com
• 1-800-544-6986
• Date of purchase · Fecha de compra

PRODUCT INFORMATION

• Serial Number—————————-
• Name——————————-
• Last Name————————
• Address—————————————
• City—————————–
• State——————————-
• Postal Code————————–
• State——————————-
• Country—————————-
• Telephone—————————–
• Importador: Black & Decker S.A. de .C.V Bosque de Cidros Acceso Radiatas No.42 3ra.Seccion de Bosques de las lomas C.P.05120, Mexico, D.F. Tel: (01 55) 5326 7100

SOLAMENTE PARA PROPOSITOS DE MEXICO

• BLACK & DECKER S.A. DE C.V.
• BOSQUES DE CIDROS ACCESO RADIATAS NO. 42 COL. BOSQUES DE LAS LOMAS.
• 05120 MÉXICO, D.F
• TEL. (01 55) 5326 7100 01 800 847 2309/01 800 847 2312

References

• Home | BLACK+DECKER
• Home | BLACK+DECKER
• Home | BLACK+DECKER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>