BREAKOUT BRK-STAT 3 In 1 Wireless Charging Station User Manual

BREAKOUT BRK-STAT 3 In 1 Wireless Charging Station

3-in 1 wireless charging station digital charge up alarm to 3 clock devices I simultaneously BRK-STAT • User Manual
MADE IN CHINA

Overview

1. Qi® Certified Wireless Phone Charger
2. Silicone Stopper
3. Adjustable-Angle Brocket
4. Digital Alarm Clock
5. Charger Holder for Apple Walch®
6. AirPods® Wireless Charger Holder
7. Easy-Access Buttons
8. Type-C Charging Port
9. EVA Gasket

FUNCTIONS OVERVIEW

• Wireless charger
• Alarm clock/Time

WIRELESS CHARGING OPERATION

1. For best charging results, use the QC3.0 adopter
2. Lift the bracket in the wireless charging plate to a position suitable for your mobile phone. You con charge your phone wireless, standing up or flat, by laying ii on the charging plate. A light indicator will turn on when charging.
3. When charging the AirPods®, align the wireless charging case (AirPods® inside) to the charging base. When charging the indicator light turns on. Don’t worry if the light goes off while the headset is charging, because the headset is activating its self-protection function and will automatically restart later.
4. Insert the USB-C end of the watch wireless charger into the charger holder first and plug it into a charger cube to wirelessly charge your watch. The stand con be set tilled or flat lo charge your Apple Watch• (wireless charger and charging cube not included).

EVA Gasket: If you are using a second-generation wireless watch charger, please wear a sponge pad

BUTTON ARRANGEMENT

SETTING TIME

1. Press in the display time interface to enhance the clock brightness. Press the for the clock brightness to decrease.
2. Top in the display time interface to access 24H and 12H Settings. If AM/PM is not displayed, ii is 24H. If AM/PM is displayed, ii is 12H.
3. Long press to set minutes, Short press to odd minute, and short press to reduce minute. Then press   again to set hour. Short press to odd hour, and short press to reduce hour.

ALARM SETTINGS

1. Press on the time display screen to turn on the alarm clock. When the alarm clock icon lights up, press again to turn ii off. Long press to enter the minute setting, short press to odd minutes, and short press to reduce minutes; Press again to enter the hour setting, press to odd hours, and press to reduce hours.
2. When the alarm clock rings, press any key to turn it off.

SPECIFICATIONS

• Material: ABS
• Size: 7″ W x 4.5″ H x 3.26″ D
• Input: DC 5V-9Vccc3A
• Output: 5W (Earphone wireless charging) 15W/10W/7.5W/5W (Mobile phone wireless charging)
• Frequency: 110.8-205KHZ
• Working distance: <8mm
• Charge efficiency: 75%-85%
• Compatibility: Support all phones with the Qi® function FCC ID: 2AANZSTAT

Attention

• Avoid direct sunlight exposure or high temperatures for an extended period.
• Do not disassemble or modify this product.
• Please put this product away from water or other liquids.
• If you want to clean this product. please disconnect the power supply first.

If you use a second-generation wireless watch charger, please use the sponge pad to compensate for the lack of thickness. Peel off the protective layer to reveal the adhesive and stick it inside the charging cavity.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

iPhone9 and AirPods® are trademarks of Apple Inc. and used herein for descriptive purposes only

• Apple is not affiliated with this product.
• This product is not manufactured, approved, endorsed, or affiliated with Apple, Inc. • All company product and service names used on this packaging or product ore for identification purposes only. Using these names, logos, and brands do not imply endorsement.

WARNING: Cancer risk from Lead Exposure

• www.P65Warnings.ca.gov
• DGL Group, Ltd.
• 2045 Lincoln Highway, Edison, NJ 08817
• www.dglusa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>