NUTOMO Keyless Entry Keypad Door Lock with Handle User Manual

NUTOMO Keyless Entry Keypad Door Lock with Handle

Letter of thanks to clients

Hi dear client,
First of all, thank you so much for choosing the NUTOMO brand among plenty of products.
NUTOMO aims at the “safe, simple, smart life”. NUTOMO has
its own manufactory and mainly produces locks selling all around the world, such as United States, Europe, Japan, etc.
Further, all products are the most assuring products selected after countless uses, tests, and personal experiences of staff. Up to now, we have also received the encouragement and love of numerous customers, for which we are also very gra­teful. In the future, all staff of our company will work harder and NUTOMO will always study and integrate the world’s m­ost cutting-edge technology into our products that will exceed customers’ expectations. We are also very willing to listen to every customer’s opinions and advice to make more improv­ements and efforts in the future.
Last but not least, if you have any issues such as installation or suggestions about the product, please do not hesitate to contact us by phone or email at any time, “Customer forem­ost” will always be our constant principle.
Wish you all the best and luck. Please continue to support NUTOMO in the future, thank you~

PRODUCT DETAILS

Package Included

Product Overview

Front Panel:

Specifications

GETTING STARTED

1. Identify Left/Right-Hand Door
   Stand by OUTSIDE facing the keypad.

2. Check Door Measurements

INSTALL THE LOCK

1. Adjust the Latch

   • A Measuring if the latch is long enough, pull it to ad-just from 60mm to 70mm.
   • B If the ‘square’ latch hole is centered in the door hole, no need to adjust.
   • C If not, adjust it until it is centered.

2. Install the Latch and Strike Plate

   • Insert the latch and keep the latch square hole horizontal.
   • Use related screws to tight up.

3. Adjust the Handle Direction

   • Left Hand Door: Turn the front handle to Left and turn the back handle to Right.
     Right Hand Door: Turn the front handle to Right and turn the back handle to Left.

   • After the adjustment, tighten the screws according to the pictures in the corresponding direction.

4. Install the Front Panel

   • Insert the flat ruler and keep it horizontal.
   • The IC wire needs to pass under the latch.

5. Route the IC Wire & Install the Mounting Plate

   • Connect the IC wire of front and back panel.
   • Tighten up 3*mounting plate screws to fix the mounting plate. Note: If the thickness of your door is greater than 48 mm, please use longer screws.

6. Install the Back PanelTighten the 3*back panel screws.

   • Install the batteries and cover.

7. Test

   • Press the handle of the back panel to see whether the latch can retract normally.
   • Before the administrator password is set (in reset mode), any password /fingerprint/ IC card can unlock.
   • Enter 6-1 O digits end with# to unlock, it will auto-lock within Ss.

8. How to reset

   • Remove the battery cover when powered on, press and hold the reset button for about 55, and release it after hearing the voice “Initializing”.
   • When you hear “succeed” it indicates that the reset is successful. (any 6-1 O digits password /fingerprint/ IC card can be unlocked now.)
   • If you don’t have a screwdriver or tool of sufficient size to press the reset button, you can remove the back panel and hold the reset button directly (also ensure that it is powered on).

HOW TO PROGRAM BY KEYPAD

Notes:

• The[*] on the keypad can be used to return to the previous menu, clear the input content, and exit the system/menu.
• The[#] on the keypad is used to operate all entered confirmation keys and doorbell functions.
• Wake up the keypad and enter[ #] to enter the menu.
  (After having the administrator password, you need to enter the “#+ administrator password#” to enter the menu.)

*Press[#] to enter the menu**

MORE FUNCTIONS

1. Doorbell
   After waking up the keypad, press#, and the doorbell will sound three times.

2. Low Battery Alarm
   When the battery is low, every time you wake up the keypad, there will be a voice reminder that the battery is low, and please replace the battery.

3. Password Input Error Protection
   Enter the wrong password 5 times in a row and enter the locked state for 3 minutes (the keypad cannot be woken up in the locked state, and an alarm will sound when you touch the keypad).

AFTER-SALES CONTACT INFORMATION
E-mail: Honestrend@hhnest.com
Toll Free: {888) 988-2118
(Available from 6:00pm-8:00am in Pacific Time)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>