IMPINJ xArray Gateway RFID Reader User Guide
- June 4, 2024
- IMPINJ
Table of Contents
xArray Gateway RFID Reader
User Guide
OVERVIEW
This guide provides simple steps to quickly start using your new xArray®
gateway. For a full description of connection methods, reader configuration,
and system setup options, please consult the xArray and xSpan Installation and
Operations Manual.
Box Contents
- 1 x Impinj xArray Gateway
- 1 x Quick Start Guide
- 1 x Safety Screw (and Allen Wrench)
Accessories Sold Separately
- Universal Power Supply
- Region-Specific AC Power Cord
- Console Cable
- Speedway Connect Software
- ItemSense Software
Connections and Ports
- +24 VDC Locking Power Supply (24 V, 2.1 A minimum)
- RJ-45 10/100 BASE-T Ethernet Port
- Power over Ethernet (PoE / PoE+) Enabled
- USB Type-B Device
- USB Type-A Host
- Management Console Port
Software for Download
Before getting started, download and install the following on your PC:
- Impinj ItemTest software (available on the Impinj Support Portal – PC only)
- Latest Octane firmware for Impinj xArray (available on the Impinj Support Portal)
Unfasten the Mounting Plate
The xArray gateway has a detachable mounting plate to serve all applicable mount configurations. It must be unfastened to access the gateway’s ports and connectors
- Insert a flathead screwdriver into the latching mechanism as shown. Push the mounting clip out and unfasten the mounting plate.
- If unfastened correctly, the mounting plate should slide and release. It can be removed during setup.
Powering the Gateway
The gateway can be powered in one of two ways: through the gateway’s Power
over
Ethernet (PoE / PoE+) capability, or with an AC power source.
NOTE: Use either AC Power or PoE / PoE+. Do not use both simultaneously.
With PoE / PoE+
-
Use the appropriate PoE/PoE+ Power Sourcing Equipment (PSE).
• R680-EU2 models: IEEE 802.3at certified (PoE+)
• All other models: IEEE 802.3af certified (PoE) -
Route an Ethernet cable from the PSE to the Ethernet port.
With AC Power
- Connect an Impinj universal power supply to the +24VDC power supply port.
- Secure the cable using the locking connector
- Route an Ethernet cable from the work area outlet to the 10/100BASE-T port on the reader
NOTE: This product is intended to be supplied with a Listed/Certified
power supply, marked LPS or Class 2, with 24Vdc output, rated minimum 2.1A.
(Ce produit est conçu pour être alimenté avec une alimentation Mis /certifiés,
marqué LPS ou de classe 2, avec sortie 24V, 2,1 A nominal minimum)
xArray Connectivity with DHCP Services
-
Make sure your xArray is connected to your local network via Ethernet.
Determine the xArray hostname to connect to a network with a DHCP server.
• Hostname: xArray-XX-XX-XX (where XX-XX-XX is the last 3 hex couplets of the reader MAC address, e.g. xArray-12-AB-CD) -
If desired, test your connection by pinging
.local in your PC’s command prompt (e.g., ping xarray-12-AB-CD.local).
NOTE:
If you are connecting your xArray to a network with a static IP address, refer
to the xSpan and xArray Installation and Operations Guide on the Support
Portal for instructions.
Updating the Firmware
-
Connect to the web configuration page using a web browser at the URL
http://. -
Log in using default credentials:
• username: root
• password: Impinj -
Select your region from the drop-down list. (Optional)
NOTE: The user is responsible for ensuring operation with the correct RF settings and is solely responsible for any fines and other damages due to incorrect or non-compliant country/region settings
NOTE: GX1 and GX2 gateways have no region pre-configured and will not transmit RAIN RFID signals until a region is selected. -
The gateway runs Impinj Octane firmware. Make a note of the “Software Version” shown on the web configuration page. If you are not running the latest version, upgrade using the “Reader Upgrade” utility. (Download from the Support Portal or ask your Impinj authorized partner for the latest released version.)
-
Click the REBOOT button. When changing the operating region, the change does not take effect until the next reboot.
Using Impinj ItemTest Software
-
Open the Impinj ItemTest software application
-
Add a new data source by clicking :
a. Enter the reader hostname (xArray-XX-XX-XX) or static IP address
b. Click Add Data Source
c. Ensure the reader data source is enabled : -
Select the Inventory showcase (default)
-
Place tags in the antenna field of view
-
Start tag inventory operation by clicking :
a. Click a column header to sort by a specific attribute
b. Right-click any column header to select which attributes are displayed -
Stop tag inventory operation by clicking :
a. Click the Settings button to change how inventory runs are configured
b. Click Save to apply the updated configuration (Cancel to revert changes) -
Click the reader name (under DATA SOURCES ) to change reader settings
a. Update reader settings as desired
b. Click Save to apply updated reader settings (Cancel to revert changes)
Fasten the Gateway to the Mounting Plate
- Swing the xArray chassis upwards towards the mounting plate and latch mechanism with sufficient force to ensure a successful connection.
NOTE: The user can apply the safety screw with the Allen wrench included in the packaging to prevent unwanted removal of the mounting plate. The screw hole is located next to the latch mechanism as shown.
RESOURCES & NEXT STEPS
Develop business applications using the Impinj Octane SDK, Impinj Octane LLRP toolkit, or Impinj Octane ETK. For more information, contact Impinj using the resources listed below.
- Sales: www.impinj.com/contact-us
- Support: support.impinj.com
- Developer site: developer.impinj.com
- Postal Address: 400 Fairview Avenue North, Suite 1200, Seattle, WA 98109
NOTICES
Copyright © 2021, Impinj, Inc. All rights reserved.
Impinj gives no representation or warranty, express or implied, for the
accuracy or reliability of the information in this document.
Impinj reserves the right to change its products and services and this
information at any time without notice.
EXCEPT AS PROVIDED IN IMPINJ’S TERMS AND CONDITIONS OF SALE (OR AS OTHERWISE
AGREED IN A VALID WRITTEN INDIVIDUAL AGREEMENT WITH IMPINJ), IMPINJ ASSUMES
NO LIABILITY WHATSOEVER AND IMPINJ DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY,
RELATED TO THE SALE AND/OR USE OF IMPINJ PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR
INFRINGEMENT.
NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY PATENT,
COPYRIGHT, MASK WORK RIGHT, OR ANOTHER INTELLECTUAL PROPERTY RIGHT IS GRANTED
BY THIS DOCUMENT.
Impinj assumes no liability for applications assistance or customer product
design. Customers should provide adequate design and operating safeguards to
minimize risks.
Impinj products are not designed, warranted, or authorized for use in any
product or application where a malfunction may reasonably be expected to cause
personal injury or death or property or environmental damage (“hazardous
uses”) or for use in automotive environments. Customers must indemnify Impinj
against any damages arising out of the use of Impinj products in any hazardous
or automotive uses.
Impinj, Monza, Speedway, xArray, Spain are trademarks or registered trademarks
of Impinj, Inc. All other product or service names are trademarks of their
respective companies. For a complete list of Impinj Trademarks visit:
www.impinj.com/trademarks
The products referenced in this document may be covered by one or more U.S.
patents. See www.impinj.com/patents for
details.