ELEMARA TQ10125 Kids Toy Electric Ride On Bumper Car Vehicle User Guide

ELEMARA TQ10125 Kids Toy Electric Ride On Bumper Car Vehicle

Product Information

Specifications

• Model: Unknown
• Manufacturer: Unknown

Product Usage Instructions

Step 1: Unpacking and Setup

1. Open the packaging and remove all contents.
2. Inspect the product for any visible damage. If damaged, contact the manufacturer or retailer.
3. Locate the user manual and read it thoroughly before proceeding.
4. Verify that all necessary accessories are included.
5. Ensure you have a compatible power source available.

Step 2: Installation

1. Identify a suitable location to place the product.
2. Ensure proper ventilation around the product to prevent overheating.
3. Connect the product to a power outlet using the provided power cable.

Step 3: Connectivity

1. If applicable, connect any external devices (e.g., speakers, display) to the product according to their respective instructions.
2. Verify that all connections are secure.

Step 4: Powering On

1. Press the power button located on the product or its remote control.
2. Wait for the product to initialize.

Step 5: Product Operation

1. Familiarize yourself with the product’s control panel or remote control.
2. Refer to the user manual for specific instructions on navigating menus and accessing features.
3. Adjust settings, if desired, according to personal preferences.

Step 6: Maintenance and Cleaning

1. Regularly clean the product using a soft, lint-free cloth.
2. Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.

Frequently Asked Questions (FAQ)

• Q: What should I do if the product does not power on?
  A: First, ensure that the product is properly connected to a power source. If it still does not power on, check the power outlet by connecting a different device. If the outlet is functional and the product still does not power on, contact the manufacturer or retailer for further assistance.

• Q: How can I get technical support for the product?
  A: For technical support, please contact [email protected]. Provide them with detailed information about the issue you are facing, including any error messages or symptoms observed. They will assist you in resolving the problem.

Kids Tov Electric Ride-On Bumper Car Vehicle
With Remote Control, LED Lights, and 360 Degree Spin, 2 Driving Modes

The owner’s manual contains important safety information as well as assembly, use, and maintenance instructions. The Ride On Bumper Car must be assembled by an adult who has read and understands the instructions in this manual.

• Keep the package away from children and dispose of it properly before use.
• Keep this manual for future reference.
• Made in China.

About Your New Ride-On

• On the purchase of your new Ride On Bumper Car.
• This Ride On Bumper Car will provide your child with many miles of riding of enjoyment. To help assure you and your rider a safe ride we ask you to please read this manual carefully, and keep it for future reference.
• Follow the recommendations in this manual, they are designed to improve the safety and operation of your Ride On Bumper Car and it’s rider.

User Notice

WARNING

• CHOKING HAZARD-Small parts. Not suitable for children under 36 months. The product contains small parts, so keep children away when assembling.
• ADULT ASSEMBLY REQUIRED.
• Always remove protective material and poly bags and dispose before assembly.
• Protective equipment should be worn. Always wear shoes and sit in the seat when operating the vehicle.
• Only drive on level ground. Never use it on the lawn.
• Never leave a child unattended.
• Keep your hands, hair, and clothes away from moving parts.
• To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools, or other bodies of water, always wear shoes, and never allow more than 1 rider

SAFETY

The following safety hazards may result in serious injury or death:

• Never leave a child unattended. Direct adult supervision is required. Always keep the child in view when a child is in the vehicle.
• Never use in unsafe conditions such as snow, rain, loose dirt, mud, sand, or gravel, otherwise may result in an unexpected accident such as tipping over, and could damage the electrical system or battery
• Not to be used in traffic.
• This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
• This toy is unsuitable for children under 36 months due to its maximum speed; Maximum user weight is 30kg.
• This toy has no brake.

BATTERY INFORMATION

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Different types of batteries or new and used batteries are not to be mixed.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.

Parts List

Assembly

1. Fit the backrest into the groove on the body, and push until you hear it”click” into place.
2. Loosen two screws on the top of the seat with a screwdriver and remove the seat.
3. Plug the connector on the vehicle body into the connector from the battery.
4. Replace the seat.

Use Your New Ride On

1. Power button: Turn the product on and off.

2. Left and Right joysticks: Control the product to move forward, backward, turn left (circle) and right (circle).
   Standard Edition

3. Lights button: Turn the lights on and off. Press and hold to increase volume.

4. Music button: Press for music/sound playing. Press and hold to decrease volume. Option I Edition (if equipped)

5. Play/pause: Press and hold to increase volume.

6. Next: Press and hold to decrease volume. Option II Edition (if equipped)

7. Lights switch: Turn the lights on and off.

Charging

WARNING

• ONLY an adult is allowed to charge and recharge the battery!
• This product with Charging Protection: When charging, all functions will be cut off.
• The POWER SWITCH must be turned in the OFF position when charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid overheating the charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time is 8 to 12 hours, less than 20 hours at most.
• Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery or the charger with another brand. Using another battery or charger may cause a fire or explosion.
• Do not use the battery or charger for any other product.

1. Plug the charger port into the input socket (the socket below the seat).
2. Plug the charger plug into a wall outlet. The battery will begin charging.
3. The indicator light is red when charging, and turns green when fully charged.

Battery Disposal

The battery will eventually lose the ability to hold a charge. Depending on the amount of use, and varying conditions, the battery should operate for one to three years. Important! Recycle the dead battery responsibly. The battery contains lead acid (electrolyte) and must be disposed of properly and legally. It is illegal in most areas to incinerate lead acid batteries or dispose of them in landfills. Take it to a federal or state-approved lead acid battery recycler, such as a local automotive battery retailer. Do not throw the battery away with your regular household waste!

Troubleshooting Guide

Completely read through this manual and the troubleshooting guide table before mailing. If you still need help resolving the problem contact us please.

Maintaining

• It is the parent’s responsibility to check the main parts of the toy before using it. Must regularly examine for potential hazards, such as the battery, charge, cable or cord, plug, screws fastening enclosure of other parts, and in the event of such damage, the toy must not be used until that damage had been properly removed.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Recharge the battery after each use. Only an adult can handle the battery. Recharge the battery at least once a month when the vehicle raider is not being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do not drive the vehicle in rainy or snowy weather. Water will damage the motor, electric system, and battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.
• When not in use, all the electrical sources should be turned off. Turn off the power switch and disconnect the battery connection.

Fuse
The battery features a thermal fuse with a rest fuse that will automatically trip and cut all power to the vehicle if the motor, electric system, or battery is overloaded. The fuse will reset and power will be restored after the unit is turned OFF for 20 seconds and then turned ON again. If the thermal fuse trips repeatedly during normal use, the vehicle may need repair. Contact us, please.

To avoid losing power, follow these guidelines:

• Do not overload the vehicle.
• Do not tow anything behind the vehicle.
• Do not drive up steep slopes.
• Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
• Do not drive in very hot weather, components may overheat.
• Do not allow water or other liquids to come in contact with the battery or other electric components.
• Do not tamper with the electric system. Doing so may create a short, causing the fuse to trip.

Use the Remote Controller

WARNING: ADULT OPERATING REQUIRED!

The remote control has precedence over foot pedal operation. (The foot pedal won’t work while you operate the Remote Controller)

1. Connect button (build connection): Lift the battery compartment door on the back of the controller and insert two AAA (LR03) batteries.
   NOTE: Batteries not included. Refer to the battery information on page 3. Press and hold the connect button for 3 seconds, and the indicators flash, which means that the remote controller is in the connected state. Then power ON the product:

   • The indicators go long and bright, which means the connection is successful.
   • If the indicator does not respond, means the connection failed. Turn off the remote controller (by removing the batteries) and the product. And try again.

2. Brake button: Press the button to stop the vehicle, and press it again to release the brake.

Note:

• Leave the remote controller idling for about 10 seconds, it will shut down automatically.
• After replacing the batteries of the remote controller, please rebuild the connection. (step 1)

Features

• 360° Spinning Bumper Car
• High-Quality and Adjustable Safety Belt
• Light Button, Control Panel, and Soft Bumper
• Anti-Flat Tires
• Colorful Flashing Lights
• Built-in Rechargeable Battery
• Durable Wheels for more Flexible Steering
• Easy to Install and Use
• No Assembly Needed

What’s in the Box

• Ride-on Bumper Car
• Remote Control
• Charger (12V500mA)
• Screwdriver
• User Guide
• Sticker

Technical Specs

• Construction Material: PP
• Motor: 12V/30W
• Speed: 1.875mph (3km/h)
• Weight Capacity: 66Ibs
• Charger: 12V 500mA
• Battery Type: 12V 4.5 Ah
• Recommended for Ages: 37-96 months
• Use Time: 45 minutes.
• Charging Time: 8-12 hrs.
• Remote Control Battery Operated, Requires (2) x ‘A AA’ Batteries
• Remote Control Battery Type: alkaline battery
• Battery Life: Up to 2+ Hours
• Dimension: 29.9″ x 25.2″ x 17.7″ -inches

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Questions? Comments?

We are here to help!

• Email: [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>