NUNOO N1700 Double Din Car Stereo Radio Instruction Manual

NUNOO N1700 Double Din Car Stereo Radio

Precautions before using the system

Important security information
Please read and fully understand the following information before use, and keep this manual next to the product for reference.

Warning

• Please install the car player according to the instructions, and contact our technical staff if you encounter any problems during installation.
• For the personal security of you and others, it is forbidden to watch videos and perform related operations while driving according to relevant national laws and regulations. Please do not watch the screen and do related operations while driving the car.
• Please take note of all the precautions in this manual and strictly follow the operating instructions
• Do not tap liquids, as this product may be short-circuited or damaged

Security statement

The reversing camera function in this system should only be used as an auxiliary reference while driving, so please pay attention to the actual situation

Note

• Do not expose this product to moisture.
• The date of the different screens displayed by the main unit must be manually adjusted to display accurately when the product is first turned on and used or whera the vehicle has been disconnected and reconnected for use

Ensuring safe driving

• Always obey safe driving regulations and current traffic rules,
• Do not continue to use this product if its use, including use of the back-up camera function, interferes with your security and concentration while driving.
• If you need to watch the screen to do so, park the vehicle in a safe place and make sure the parking brake is applied.
• When using this product, do not set the volume too high, or you will not be able to hear the traffic and emergency signals outside the vehicle.
• When the vehicle is running, some functions (such as video playback, etc.) cannot be realized for the sake of driving security.
• If you need to watch the video while driving, you need to go to the settings to find the Brake Detection option and turn it off

Other security information

• Use the system when starting the engine to prevent battery exhaustion

Introduction to interface definition.

Precautions before installation

CAUTION

• Never install this product in places where, or in a manner that
  • Could injure the driver or passengers if the vehicle stops suddenly.
  • May interfere with the driver’s operation of the vehicle, such as on the floor in front of the driver’s seat, or close to the steering wheel or gearstick.
• To ensure proper installation, be sure to use the supplied parts in the manner specified. If any parts are not supplied with this product, use compatible parts in the manner specified after you have the part compatibility checked by your dealer. If parts other than supplied or compatible ones are used, they may damage internal parts of this product or they may work loose and the product may become detached.
• Do not install this product where it may( I ) obstruct the driver’s vision, ( II ) impair the performance of any of the vehicle’s operating systems or safety features, including airbags, hazard lamp buttons or (III) impair the driver’s ability to safely operate the vehicle.
• Never install this product in front of or next to the place in the dashboard, door, or pillar from which one of your vehicle’s airbags would deploy. Please refer to your vehicle’s owner’s manual for reference to the deployment area of the frontal airbags.

Before Installing
Consult with your nearest dealer if installation requires drilling holes or other modifications of the vehicle. Before making a final installation of this product, temporarily connect the wiring to confirm that the connections are correct and the system works properly.

Installation notes

• Do not install this product in places subject to high temperatures or humidity, such as
  • Places close to a heater, vent or air conditioner.
  • Places exposed to direct sunlight, such as on top of the dashboard.
  • Places that may be exposed to rain, such as close to the door or on the vehicle’s floor.
• Install this product horizontally on a surface within O to 60 degrees tolerance.
• dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.

Before installing this product

1. Remove the trim ring. Extend top and bottom of the trim ring outwards to remove the trim ring.

2. Trim ring

3. Insert the supplied extraction keys into both sides of the unit until they click into place.

4. Pull the unit out of the holder.

5. Extraction key

Installation with the holder

1. Install the holder into the dashboard.
2. Secure the mounting sleeve by using a screwd river to bend the metal tabs (90 ° ) into place.
3. Dashboard
4. Holder
5. Install this product into the holder
6. Attach the trim ring
7. Trim ring
   When there is a large gap, the trim ring is installed on the side and fixed to the panel. 4 hooks can be cut when they are not installed properly, and Trim ring can also be fixed

Installation using the screw holes on the side of this product
Fastening this product to the factory radio-mounting bracket. Position this product so that its screw holes are aligned with the screw holes of the bracket, and tighten the screws at three locations on each side.

TIP
The amount of this units protrusion from the dashboard/console can be adjusted by shifting the position of the screw hole of this unit to the factory radio- mounting bracket.

1. Factory radio-mounting bracket
2. If the pawl interferes with installation, you may bend it down out of the way.
3. Dashboard or console
4. Flush surface screw Be sure to use the screws supplied with this product.

Introduction and operation of the main page features

1. Home key
   Tap this key to return to the main interface;

2. Volume key
   Tap the volume key to display the current volume information; You can adjust the volume\ switch mute\ display the current volume status.

3. Radio mode icon
   Tap the radio mode icon to enter the radio operation interface.

4. Bluetooth mode icon
   Tap the Bluetooth mode icon to enter the Bluetooth operation interface.

5. Backlight mode icon
   Tap the backlight mode icon to switch between day and night or turn off the backlight mode.

6. Displays the device connection status
   Displays the connection status of Bluetooth or USB. When Bluetooth or USB is connected, the corresponding icon will be highlighted on the screen, otherwise it will not be displayed.

7. USB mode icon
   Tap the USB mode icon to enter the USB operation interface.

8. Time display
   Displays the current system time; Tap it to switch the clock format\ digital format display.

9. Phone link mode icon
   Tap the mode icon of Phone link to enter the operation interface of Phone link;

10. 5D card mode icon
    Tap the SD card mode icon to enter the SD card operation interface;

11. Setting mode icon
    Tap the setting mode icon to enter the setting mode for operation;

12. AUX mode icon
    Tap the AUX mode icon to enter the AUX operation interface;

13. FCAM mode icon
    Tap the FCAM mode icon to enter the FCAM operation interface;

14. DSP mode icon
    Tap this DSP icon to Audio regulation

Introduction to radio features and operation

1. Tap this key to browse the stored station information; long-tap this key for one second to search the station from the lowest to the highest frequency, and save the searched information to the search list, and the list will be refreshed and replaced;
2. Tap this key to cycle through FM> AM> FM modes;
3. Tap this key to switch to stereo/mono;
4. Tap this key to toggle remote/near distance;
5. CCI Tap this key. The frequencies can be moved backward, long­ touch for one second to search backward, and automatically stop when a valid station is found.
6. Tap this key. The frequencies can be moved forward, long­ touch for one second to search forward, and automatically stop when a valid station is found.
7. Radio Storage Area. 18 stations can be stored in FM and 12 in AM; (AM function is optional).
8. Tap this key to Browse the radio
9. Tap this key to Audio regulation
10. Tap this key to RDS Function setting

Brief introduction and operation of Bluetooth function

Introduction of Bluetooth Function
The system is compatible with Bluetooth +BR+E DR+BLE and supportsA2DP \AVC TP \AVDTP \AVR CP \ HFP \ SPP \ATT\ GAP\ GATT \ RFCOMM \SOP\ L2CAP

1. Tap this key to enter the Bluetooth extraction interface;
2. Tap this key to enter the Bluetooth call recording interface;
3. Tap this key to enter the Bluetooth phone book interface;
4. Tap this key to enter the Bluetooth music interface;
5. Tap this key to enter the Bluetooth connection interface;
6. Tap this key to delete the connected phone’s information;
7. Tap this key to disconnect the connected phone\ reconnect the phone to Bluetooth;

Function introduction and operation of USB flash disk \SD card

1. Introduction and operation of the music playback function.
2. Introduction to the music playback feature.
3. Supports playing MP3\WMA\AAC\WAVE\FLAC\APE\OG G\M 4A(QT)\RA;

1. Tap this key to enter the audio setting interface;
2. Tap this key to toggle the single song loop/ folder loop/ all loop function;
3. Tap this key to switch to the previous song to play;
4. Tap this key to turn on random play function
5. Tap this key to toggle on the pause/play function;
6. Tap this key to turn on the\ Off numeric keyboard function;
7. Tap this key to switch to the next song;
8. Tap this key to turn on\ off the song list function;
9. Tap this key to enter \exit file list screen;

Introduction and operation of the video playback function

Video playback function overview
Support playing MP4\MP5\D IVX\AVI\M KV\OnM PG\AS F\FLV\RMVB\ TS;

1. Tap this key to switch to the previous video;
2. Tap this key to toggle the pause/play function;
3. Tap this key to switch to the next video;
4. Tap this key to toggle between single loop/ folder loop/ all loop function;
5. Tap this key to turn on random play;
6. Tap this key to zoom in on the video;
7. Tap this key to switch to the next Function menu;
8. B Tap this key to enter the audio setting interface;
9. 15″‘1 Tap this key to enter the interface of display settings; 2.10.
10. Tap this key to turn on/off the numeric keypad function;
11. El Tap this key to turn on/off the song list function;
12. m Tap this key to switch to the previous page of Function menu;

Introduction and operation of picture playback function
Picture playback function description: support playing JPG\BMP\PNG;

1. Tap this key to switch to the previous picture;
2. Tap this key to toggle the pause/play function;
3. Tap this key to switch to the next picture to be played;
4. Tap this key to turn on/off the numeric keyboard function;
5. a Tap this key to switch to the next Function menu;
6. B Tap this key to zoom in on a picture;
7. Tap this key to rotate the picture;
8. Tap this key to toggle between single song loop/ folder loop/all loop functions;
9. Tap this key to turn on the random play function;
10. Tap it to switch to the previous page of the Function menu;

Function introduction and operation of Phone link

Note: In order to use the cell phone connection function, you need to select the connection method on the vehicle side first.

• Introduction to Phone link’s functions: When using an Android phone for wired phone interconnection, the phone needs to turn on “USB Debugging” in “Developer Options”.
• When using the lphone connection, you need to keep the phone unlocked, then connect the phone with the USB cable and click “Trust” to complete the Mirror Link.

Phone Type select

1. Tap this key to enter the interface of Android device wired phone interconnection function;
2. Tap this key to enter the interface of wired mobile interconnection for Apple devices;
3. Tap this key to enter the wired CAR PLAY interface;
4. Tap this key to enter the Android auto interface;

Common problems when using the cell phone interconnect function

1. When using the wired phone interconnect back control function, you need to connect Bluetooth to use;
2. Some Android phones need to be touched in Mobile>Application Management> Auot link> Open “Force full screen display”;

Introduction and operation of setting menu function

1. Tap this key to enter the function setting interface, which can be slid up and down by touching it;
2. Tap this key to enter the audio setting interface;
3. Tap this key to enter the display settings interface;
4. Tap this key to enter the time setting interface;
5. Tap this key to enter the wallpaper setting interface;
6. Tap this key to enter the direction control setting interface;

Brief introduction and operation of learning function of direction control

1. Press and hold the steering wheel key, then click on the key icon on the steering wheel interface, the icon will change color;
2. After pressing all keys, tap ,and learning is complete.

Brief introduction and operation of remote control function

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FAQ

Is there a detailed installation and trouble shooting guide available for this car stereo?

There is a QR code for your reference in the package. Please scan the code and watch the video. Any other questions, please feel free to contact us. We are here to help you. Thank you.

What should I do when I encounter the problem that the firmware is required to be updated?

You can mail us and state your problems you have encountered, and we will provide you with the corresponding updated software according to your problems.

Why does the time and date keep resetting?

Please check the car battery, it is usually caused by low on battery.

What to do when the machine is not working?

You can reset the car radio by inserting a pin into the RST hole on the exterior of the machine. If previous operation is not working, please contact our technical customer service staff to provide you with an upgraded software.

When connecting Car play and mirror link functions, it keeps disconnecting and reconnecting.

It is usually caused by the loose data cable. You need to use a new phone data cable. Note the original charging cable is the best choice.

How do I change the start-up screen's logo to my own car's logo?

Enter the setting surface, find LOGO and enter the password 0000 to select different car logos.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>