Amazon Basics B0773BHCVD Two Port USB Wall Charger Instruction Manual
- June 15, 2024
- amazon basics
Table of Contents
Amazon Basics B0773BHCVD Two Port USB Wall Charger
Contents:
Before getting started, ensure the package contains the following components:
Operation
NOTE: You can charge or operate two USB devices simultaneously using the wall charger. The output current per slot is max. 2.4 A (4.8 A total for both slots).
- Connect the switched-off USB device to the wall charger.
- Connect the wall charger to a common household power outlet. The power indicator on the wall charger lights up to indicate the wall charger is operational.
- Your USB device is now charging. Should you wish to operate the USB device, you may turn it on now.
- Turn off the USB device before disconnecting the wall charger from the power outlet.
- Unplug the wall charger after use.
Cleaning and Maintenance
- Always unplug the product from the wall outlet before cleaning.
- Clean the product with a dry, lint-free cloth.
- Always store the product in a dry place.
Safety and Compliance
- Use the product only as instructed. Read all instructions before operating the product.
- Do not disassemble any of the components. Refer all services to qualified personnel only.
- Do not place or store the product in a humid area and do not expose it to water or rain.
- The device is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. These may become dangerous playing material for children.
- Protect the product from extreme temperatures, direct sunlight, strong jolts, flammable gases, vapours and solvents.
- Also observe the safety and operating instructions of any other devices which are connected to the product.
- Disconnect the product from the power outlet and the USB devices when it is not in use.
- Never connect or disconnect the product if your hands are wet.
- Make sure that your device meets the product’s power requirements (see Specifications).
FCC Statement
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance may cause interference and void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC
- Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
IC Regulatory Statement
This Class B digital apparatus complies with Canadian ICES-3(B)/ NMB-3(B).
WEEE
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.
Specifications
- Input voltage 100-240 V ~, 50/60 Hz
- Input current 0.6 A max
- Output voltage 5V
- Output current 4.8 A (each port 2.4 A max)
- Protection Class
- Operating temperature range 0° – 40°
POWER SUPPLY
Feedback and Help
- We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
- Scan QR Code below with your phone camera or QR reader:
- amazon.co.uk/review/review-your-purchases#
- If you need help with your Amazon Basics product, please use the website or number below.
- US: amazon.com/gp/help/customer/contact-us
- UK: amazon.co.uk/gp/help/customer/contact-us
- +1 877-485-0385 (US Phone Number)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>