WulaWindy EN8813-RGB Digital LED Alarm Clock User Manual

WulaWindy EN8813-RGB Digital LED Alarm Clock

Product Information

Specifications

• Model: EN8813-RGB
• Power Source: USB or Adaptor
• Battery: Button Cell (CR2016)
• Speaker: Built-in speakers

Product Usage Instructions

Time Setting
To set the time on the digital LED alarm clock:

1. Press and hold the “M” button for more than 3 seconds to enter the time setting mode.
2. Choose between 12 or 24 hours mode by adjusting the data using the “+” or “-” buttons.
3. Press the “M” button once to enter LED time setting.
4. Adjust the hour by pressing the “+” or “-” buttons.
5. Press the “M” button to enter minute setting.
6. Adjust the minute by pressing the “+” or “-” buttons.

Alarm Setting and Snooze Setting
To set the alarm and snooze time:

1. After completing the LED time setting, press the “M” button once to enter alarm setting.
2. Press and hold the “M” button for more than 3 seconds to enter hour-minute-snooze time setting.
3. Adjust the hour by pressing the “+” or “-” buttons.
4. Press the “M” button once to enter minute setting.
5. Adjust the minute by pressing the “+” or “-” buttons.
6. To set the snooze time, press the “M” button after finishing the alarm setting.
7. The default snooze time is 5 minutes. The “05” digit will be flashing to represent 5 minutes.
8. Press the “+” or “-” buttons to set the snooze time between 5-60 minutes.
9. Press the “M” button once to confirm the snooze time setting.

Automatic & Manual Dimming Set
The alarm clock has automatic and manual dimming settings:

• Automatic Dimming: The clock will automatically adjust its brightness based on ambient light conditions.
• Manual Dimming: Press the “-” button to toggle between different dimming options. The AL symbol will indicate whether the alarm is turned on or off.

Night Mode Setting
The night mode setting allows you to control the display brightness during nighttime:

• Turn on and turn off the night mode by pressing the “-” button. The AL symbol will indicate whether the alarm is turned on or off.

Changing Colors of the LED Display
To change the colors of the LED display:

• Use the SNOOZE button to cycle through different multicolor options.

Frequently Asked Questions (FAQ)

• Q: How do I remove the plastic insulator tab?
  A: To remove the plastic insulator tab, open the button battery compartment at the back of the clock and take out the tab.

• Q: How can I power the alarm clock?
  A: You can power the alarm clock by connecting it to electricity using a USB cable or an adaptor.

• Q: What is the default snooze time?
  A: The default snooze time is 5 minutes.

• Q: How long does the buzzer alarm last?
  A: The buzzer alarm lasts for 2 minutes.

• Q: How do I enter snooze mode when the alarm beeps?
  A: Press the SNOOZE button to enter snooze mode. The AL symbol will flash until the snooze time is reached and then the alarm will sound again.

• Q: How do I turn off the alarm and snooze?
  A: When the alarm beeps, press any button except the SNOOZE button to turn off the alarm and snooze. The AL symbol will stop flashing.

Notes

1. Some scratches appear on the protective film due to long-distance transportation, please tear the protective film off before using. (Tips: As our protective film is very thin and fit well, which requires a little patience to find it and tear off.) Please feel free to contact us if you have any other problem, we will try our best to solve it.
2. Auto Brightness Mode and Night Mode cannot be turned on simultaneously.
3. The supplied battery is only for memorizing the time settings; it just could keep time memory when power off, couldn’t support the digital clock light up.
4. Please remove plastic insulator tab from button battery compartment in the back and connect the product with electricity by USB or Adapter.
5. If time mode is 12 hour mode, when is Afternoon Time, there is “PM” symbol in display, when is Morning Time, there is no “PM” symbol in display.

Introduction of Buttons

Product Parameter

1. LED Time display ( Thedefault time display 0:00).
2. There are 5 levels of brightness ( The default setting is the brightest light).
3. Night mode with automatic dimming.
4. Total 4 functional buttons: “M”-Mode button, “+” – Up button, “-”- Down button, “SNOOZE”.
5. Two kinds of time mode option (12/24 hour modes selectable).
6. The default Alarm display is 6:00.
7. Alarm with Pre-settable Snooze function ( 5 minutes).
8. nooze last for 5-60 minutes and unlimited times.
9. Power supply: When powered by DC power, the LED is long bright and all functions are normal. When powered by built-in button cell, the LED light is off and no display, but can keep the time normal walking and original setting.
10. There are 2 USB Output ports on the side (5V, 1A) which allows you to change Android or Apple system smart phone in the same time.

Operating Instructions

Note: Please remove plastic insulator tab from button battery compartment in the back and connect the product with electricity by USB or Adaptor .

Time Setting

• First Press and hold “M” button for more than 3 seconds to start setting time mode.There is “12/24 hours” mode.
• Adjust the data using “+” or “-” button. For example, if you choose “24 hours” mode, but “12 hours” in display, then you can press “+” or “-” to adjust.
• After “12/24 hours” mode is setting, you can press “M” once to enter LED Time setting. The sequence is “Hour” – “Minute”. First is “Hour” setting, adjust the data using “+” or “-” button, after “Hour” setting is done, press “M” to enter “Minute” setting.
• Remarks: In LED Time setting, there is no “AL” symbol in LED Time display. Adjust the data using “+” or “-” buttons, after setting is done, the setting object is not flashing.

Alarm Setting and Snooze Setting

• After LED Time setting is done, press “M” once to enter Alarm setting, then press and hold “M” button for more than 3 seconds to make “Hour” – “Minute” – “Snooze time” setting.
• First Adjust the data using “+” or “-” buttons to make “hour” setting, then press “M” once to enter minute setting.
• After Alarm is finished, then press “M” to enter snooze time setting. The defualt Snooze time is 5 minutes, “05” digit is flashing ( represents of 5 minutes). You can press “+” or “-” button to set 5-60 minutes snooze time. After snooze time setting is done, press “M” once to confirm.
• Remarks: Turn on and turn off Alarm. Press “-” to select. For example, when you press “-” once, you can see “AL” symbol in LED Time display and Alarm display. Next you press “-” again, you can see “AL” symbol only in Alarm display. ( There is “AL” symbol both in LED Time display and Alarm display means Alarm is turn on.
• Please check below pictures of LED Time display and Alarm display when Alarm is turn off. The first picture means the Alarm turns off, the second means the Alarm turns on.

When the Alarm Beeps

• BUZZER alarm last for 2 minutes
  • When the alarm beeps, press “SNOOZE” button to enter snooze mode. The corresponding “AL” symbol flashes till reach to the snooze time set and then alarm again.
  • When the alarm beeps, press any other buttons except the “SNOOZE” button to turn off the alarm and snooze. “AL” symbol stops flashing.

Automatic & Manual dimming set
Press and hold “+” button for more than 3 seconds. “OFF” displays which means manual mode. In manual mode, Press the “+” key to adjust the brightness of LED display: 100% – 80% -50% – 30% – 10% -OFF by cycle. Press and hold “+” button for more than 3 seconds. “ON” displays which means auto mode. The default is auto mode, which means the brightness is changing automatically by the environment, when the environment is dark, the brightness is low; when the environment is bright, the brightness is high.

Night Mode Setting

• Night mode means that LED automatically enter into the low brightness display status at night
• In LED Time display mode, press “M” button twice to turn on the night mode setting. Select “ON” or “OFF” by pressing “+” or “-” manually.
• The default period of 18:00 to 6:00 the next day, it will automatically enter into the lowest bright-ness displays status. When night mode is “ON”, Press and hold “M” button for more than 3 seconds to enter interval time setting mode. The setting sequence is: “start hour” – “start minute”- “end hour” –“ end minute”. At start hour and minute setting status, the upper point in the center of the screen is long bright. At end hour and minute setting status, the lower point in the center of the screen is flashing.
• Remarks: Auto Brightness Mode and Night Mode cannot be turned on simultaneously. If you need to make Night Mode setting, please make sure the dimming setting (Brightness Mode) is manual. You can choose any time for interval time setting.

Changing Colors of the LED Display

When it is in time mode, press “SNOOZE” button to change the color of the LED display.

The 11 colors sequence:
Random Color – RGB Changing – RGB Left to Right Flowing – RGB Downward Top Flowing – White – Red – Yellow – Green – Light Blue – Blue – Purple

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>