CATLINK PURE2 Cat Water Fountain User Manual
- June 14, 2024
- CATLINK
Table of Contents
CATLINK PURE2 Cat Water Fountain
Important
- Thank you for purchasing CATLINK Al Water Fountain – PURE2. CATLINK will, as always, put pet safety, health and service experience first.
- Please read this user manual carefully before use. Once the product is used, it means that the following safety precautions have been carefully read and accepted.
- CATLINK is not responsible for any accident or loss caused by illegal operation and assumes no legal responsibility.
- The right to interpret and modify this statement belongs to CATLINK.
Important Safety Instructions
Failure to comply with the following terms may result in product failure or other accidental damage.
- Please assemble and use the product in strict accordance with the instructions.
- Please use this product indoors, avoiding high temperatures, high humidity, and direct sunlight.
- This device uses a low-voltage 5V power supply. Pets will not get electrocuted by biting wires, but it will cause leakage. Please guide your pet to use this product correctly.
- Please use the original adapter, otherwise, it will damage the device or cause safety hazards.
- Please place the device on a dry, stable, and level floor. Keep it horizontal and do not overturn it, otherwise, the device will not work properly.
- The base of this product should not be immersed in or soaked in water.
- If children use this device, be sure to use it under the guidance of an adult.
- Please carry out maintenance under the guidance of professionals to avoid accidental injuries.
- To provide a better experience, we will regularly carry out product upgrades. The actual equipment or related functions may be different from this manual.
- Feel free to contact us if you have any problems.
Package List
Device Structure
Button Functions
Indicator Lights
Device Setting
WIFI connection
-
Search “CATLINK” in the app store, or scan the QR code, download and install the CATLINK APP. 10S Android.
-
Connect your phone to 2.4G Wifi. The App currently does not support 5-GHz, and WiFi that requires special certification such as hotels and airports.
*Note: The WiFi name cannot contain spaces or other special characters, otherwise it will affect the WiFi connection. -
Open the CATLINK APP, register an account and log in, click (Devices), add a water fountain and follow the prompts.
*Please turn on the mobile phone’s Bluetooth and allow location access; the Android phone also needs to turn on GPS. -
Press and hold the function button for 5 seconds, release the button after you hear 2 beeps and see the blue Wifi indicator flashing.
*Please keep the water fountain as close to the router as possible, and make sure the water fountain is powered on. -
Follow the instructions of the APP to operate.
-
After completing the above steps, all functions of the water fountain can be used.
*If the WiFi setting fails, please try again patiently and check whether the WiFi password is entered correctly. If the wifi setting fails many times, please contact the after-sale service for assistance.
Working Mode
Installation Instructions
Install the Ultrafiltration Filter
Please clean the Bucket and related parts before use. (*Do not wash the
Base, keep it dry.)
- Put the Ultrafiltration Filter along the groove inside the Bucket.
- Rotate the Ultrafiltration Filter to the left until it reaches the end of the groove.
- Install the Water Pump Pipe to the Filter Inlet.
Add Water
Fill the Bucket with water up to the Max line.
Install Tray, Water Outlet, Preliminary Filter Box
- Install the Water Tray.
- Install the Water Outlet, Insert the Water Outlet as far as possible to fix the Water Tray.
- Install the Foam Filter at the bottom of the Preliminary Filter Box, and then install the Preliminary Filter Box to the Water Fountain.
Power On
Power on the Base and place the Bucket on the Base.
Product Cleaning
- Cleaning and Attentions
1. Do not wash the Base, keep it dry.
2. Before disassembling and cleaning, please pull out the Water Outlet.
3. It is recommended to disassemble and clean the Water Pump every 7 days.
4. It is recommended to simply rinse and dry the Ultrafiltration Filter with clean water every 7 days. Replace Ultrafiltration Filter
- Replacement Cycle
- The service life of the Ultrafiltration Filter is 3 months, please replace it every 3 months.
- When the service life of the Ultrafiltration Filter expires, in the state of sufficient water, the Water Volume Indicator will flash alternately red and green. In addition, you can also view the Ultrafiltration Filter usage in real time on APP
- Activate the Ultrafiltration Filter
1. Install a new Ultrafiltration Filter
2. In the state of sufficient water, press and hold the button for 15 seconds until the water indicator light stop flashing, which means the Ultrafiltration Filter is activated.Replace Foam Filter
- It is recommended to replace (or clean once) the Water Pump Foam Filter (black) once a week.
- Preliminary Filter Box
It is recommended to replace the Foam Filter (white) of the Preliminary Filter Box once a week (Repeated cleaning is not recommended)
Other Accessories
- Smart Collar ( Only for the PRO version)
- CATLINK Smart Collar – CoNet (sold separately), only for PRO version Water Fountain Pure 2, for multi-cat identification.
Product Specifications
Customer Service
We will provide customers with a one-year free warranty service. If you have
questions or need assistance, contact us!
Phone Support: + 1 833 440 2772
Mon-Fri: 1 0AM-6PM EST
Email Support: support@catlink.cn 24/7
Toll free: +1 833 440 2772
Email: support@catlink.cn
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>