CATLINK CL-07 Self Cleaning Automatic Litter Box for Cats User Manual

CATLINK CL-07 Self Cleaning Automatic Litter Box for Cats

Thank you for purchasing a CATLINKAI Cat Litter Box Scooper Pro – X!

• CATLINK aims to develop products that keep your pets happy and make your life easier. This manual will help you get the most out of your Scooper Pro – X. We will guide you through the setup process, as well as provide you with useful tips and advice.
• There are many features to explore with the Scooper Pro – X, so keep this manual handy for future reference. If you need assistance or a little extra time, please email us at [email protected] or call us +1 833 440 2772.
• Enjoy your Scooper Pro – X, and Enjoy your Freedom!

Important Safety Instructions

• Always be sure any cat in your household that might use the Scooper Pro-X weighs at least 3.3 pounds. Cats must weigh 3.3 to 22 pounds to safely use the Scooper Pro-X.
• Always place the Scooper on a firm, level surface. Avoid soft, uneven, or unstable flooring, which may affect the ability of the unit to detect your cat.
• Always unplug the unit before servicing.
• Never force your cat into the Scooper.
• Never put anything in the unit other than clumping litter or litter beads that are small enough to pass through the screen.
• Never sit on or place anything on top of the Scooper
• Never push the Scooper against a wall or into a corner (must not be touching any walls).
• Never remove the Globe or Bonnet while the unit is rotating or turn the unit on if the Globe or Bonnet are removed.
• Never wet or submerge the Bonnet or Base.
• Never allow children and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge to use, clean, or maintain the Scooper without supervision, instruction concerning its use in a safe way, and understanding of the hazards involved. Children below 8 years of age should not be allowed contact with the Scooper.
• Never allow children or others to play with the Scooper.
• Never use an external power supply other than the one provided with the unit.
• If the external power supply is damaged, please contact us for a replacement.

Product Structure

Packing List

• The carbon filter box has been placed in the waste box. CATLINK recommends taking this part out every month exposing it to the sun, and replacing it every 2 months.

Setting Up Your Scooper Pro – X
Once you have assembled the product and confirmed that the package is complete, get started by following the steps below.

Placement

1. Make sure that the unit is placed on flat and solid ground with no other object at the bottom. Avoid soft, uneven, or unstable flooring.
2. Locate the unit near a power outlet. Ensure the unit isn’t pushed against a wall or into a corner (must not be touching any walls), and there is no other objects are placed on the top.
3. Make sure that the unit is close to the Wi-Fi signal and far away from electrical appliances with strong interference.

Power and Initial Test Cycle

1. Check whether the Trash Liner is properly placed, and properly push the Waste Drawer back to its position.
2. Plug the small end of the power supply into the power input at the back of the Base. Then plug the adapter into a wall outlet.
3. The unit will perform a test cycle every time it is plugged in. DO NOT touch the unit or buttons during this process. It takes about 3 minutes.

WIFI Connection

NOTE

• Please place the litter box as close to the router as possible, and make sure the litter box is powered on.
• Please authorize the location information, and the Android phone also needs to turn on GPS.
• Please note that the WIFI name can only contain letters and numbers, so as not to affect the connection.
• Please use 2.4GHz WIFI, 5GHz WIFI is not supported, as well as hotels, airports, etc. that require special certification of WIFI.

1. Download the CATLINK APP in the application market of your phone or scan the QR code.
2. Register your account in the app and log in. ( Please authorize location, please turn on GPS for Android.)
3. On the DEVICE page, click the’+’ in the upper right corner, select the SCOOPER, and follow the instructions tions to complete the WIFI connection. (Before connecting, your mobile phone needs to be connected to WIFI)
   Step1.
   Long press the 2 buttons until you hear 2 beeps. Make sure that the WIFI indicator is flashing, and click NEXT on the APP.

Step 2

• Enter your WIFI password. Click NEXT.

Step 3

• Waiting for a few moments. During this process, please ensure that the phone and the device are kept close to each other.
• Da dal Device added successfully, the WIFI indicator is solid blue.
• If you can’t find your device, please pull down the DEVICE page to refresh.

Connection Failed

• Please turn off the power, and give it a try one more time. Please read the NOTE under the title [WIFI Connection] of this chapter, to ensure that there are no errors in the process.
• If the connection is unsuccessful, please feel free to contact us. (Toll free:+1 833 440 2772, Email: [email protected] )

Cat Litter

• Fill the Globe through the opening with clumping litter until it meets the Fill Line when spread flat. Be careful not to overfill the Globe.

• The Scooper Pro – X litter sifting system requires clumping litter or mixed litter to work properly We recommend a high-quality, clay-clumping litter.

• DO NOT use a litter that is strictly absorbent, non-clumping, loose-clumping, news- paper-based, or wood-based pellets.

• If you are using a litter alternative not listed here, please contact Customer Service to make sure you are using a compatible litter.

• Congratulations!

• Your Scooper Pro – -X is now ready to use.

Control Panel – Button Functions

Control Panel

Button Functions

Indicator Lights

Working Mode

Protection Mechanism

Radar

| ****

Level 1

| ****

During the rotation of the Globe, if a moving object enters, radar protection will be triggered first, and the Globe will stop rotating.

When the object is detected to leave, the Globe will resume rotation.

Weighing

| ****

Level 2

| ****

During the rotation of the Globe, if an object over  3.31bs enters, the weighing protection will be triggered, and the Globe will stop rotating. When the object is detected to leave, the Globe will resume rotation.

Anti-pinch

| ****

Level 3

| ****

When the Globe’s litter outlet is facing downwards and the anti-pinch device is triggered during rotation, the globe will release the maximum litter outlet space and stop rotating.

This protection can only be lifted after human intervention.

Motor Stalled

| ****

Level 4

| ****

The Globe will stop rotating when the motor resistance suddenly increases during the rotation. This protection can only be cancelled with human intervention.

Replace All Cat Litter

1. Click the Mode button to switch to Empty mode.
2. Click the Clean/Pause button and the Globe will rotate clockwise.
3. After all the cat litter has fallen into the Waste Drawer, click the Clean/Pause button again, and the Globe will return to its original position.
4. Take out the Waste Drawer, seal and discard the waste cat litter; put on a new Trash Liner, and push the Waste Drawer back to its original position.
5. Add new cat litter, below the MAX mark, then click the Clean / Pause button to clean once to smooth the cat litter.

Cleaning and Attentions

1. Power off after emptying the cat litter, Refer to the steps for [Replace All Cat Litter]
2. Remove the top cover, If it is a luxury model, please remove the connecting wire as shown in the figure before removing the top cover.
3. Take out the Globe (Pay attention to removing the support rod of the rotating shaft on the back of the Globe).
4. Take out the Waste Drawer and the Carbon Filter (The Carbon Filter is recommended to expose it to the sunshine once a month and replace it every two months).
5. Globe and Waste Drawer can be washed directly (be sure to wipe and dry thoroughly after washing).
6. Top Cover and Base can be wiped with wet wipes ( Due to the electronic parts inside, it cannot be washed directly).
7. After cleaning up, install a new Carbon Filter back into the Waste Drawer, and follow the reverse steps to assemble the device properly.

Troubleshooting

Accessories

• You can order the above products on Amazon.com. or www.catlinkus.com.

Product Specifications

• Product Name: CATLIN KAI Cat Litter Box (Pro – X) – SCOOPER
• Product Model: CL-07 I CL-08
• Main Material: pp
• Product Size: 23.62 x 22.83 x 27.95 inch
• Rated Voltage: 12V
• Rated Power: 5W
• Applicable Scope: Cat (3.3-22 lbs)
• Weight: 24.25 lbs
• Carried Standard: GB 4706.1-2005

Compare CATLINK Models

Weight Sensor

| |
Anti-pinch Sensor| |

Radar Sensor

| |

UV Steril ization

| |
Deodorization| |

NOTE
Deodorization function: This function is enabled by default. Closing and mode adjustment are not supported.

Customer Service

• We will provide customers with a one-year free warranty service. If you have questions or need assistance, contact us!
• Phone Support
• +1 833 440 2772
• Mon-Fri: 10AM-6PM EST
• Email Support
• [email protected] 24/7
• Toll free: +1 833 440 2772
• Email: [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>