Hangshi Electronic MD360 Wireless 2.4G Dual Mode Mouse User Manual

Hangshi Electronic MD360 Wireless 2.4G Dual Mode Mouse

Product Information

• Specifications
  • Connected by: Bluetooth & 2.4G receiver
  • Dimensions: 112.7672.1942.06mm
  • Operating distance: 8 m / 26.2 ft
  • Rechargeable lithium battery: 300mAh
• Product Preview
  • The Wireless+2.4G Dual-mode Mouse comes with the following features:
  • ON/OFF Switch: turns the mouse on and off.
  • Connect Switch: 2.4G/bluetooth 1/bluetooth 2 channel switch button.

Product Usage

• Mouse Re-pairing (2.4G Connection)
  • To re-pair the mouse with the 2.4G connection, follow these steps:
  • Turn off the mouse and unplug the 2.4G USB receiver.
  • Hold down the Left-button, Wheel button, and Right-button simultaneously for 3 seconds without releasing them.
  • Turn on the mouse while still holding down the buttons.
  • Immediately insert the 2.4G USB receiver into the computer within 10 seconds and keep the mouse close to the receiver within 30cm (0.98 ft).
• Wireless Bluetooth Connection
  • To pair the mouse using Bluetooth, follow these steps:
  • Turn on the mouse.
  • Click the Connect button to choose Bluetooth 1/2 channel.
  • Hold and press the Connect button for 5 seconds to enter pairing mode.
  • On your device, find the name of BT 3.0 Mouse / BT 5.0 Mouse and click to connect.
• Sleep Mode
  • The keyboard and mouse will enter sleep mode if idle for 10 seconds. Press any key to exit sleep mode.
• Charging
  • To charge the keyboard or mouse, follow these steps:
  • Connect one end of the included type-c cable to a USB charger.
  • Connect the opposite end of the cable to the charging slot on the keyboard or mouse. (Note: Output: DC 5 V / 500mA; USB charger is not included)
  • The charging indicator will glow red while the keyboard or mouse is charging.
  • A full charge takes approximately 2 hours.
• Frequently Asked Questions (FAQ)
  • Q: What is the operating distance of the mouse?
  • A: The mouse has an operating distance of 8 meters or 26.2 feet.
  • Q: How long does it take to charge the keyboard or mouse?
  • A: A full charge takes approximately 2 hours.
  • Q: Can I use this mouse with both Bluetooth and the 2.4G receiver simultaneously?
  • A: No, you can only use one connection mode at a time. You can switch between Bluetooth and the 2.4G receiver using the Connect Switch button.
  • Q: Does the package include a USB charger?
  • A: No, the USB charger is not included in the package. You need to use your own USB charger with an output of DC 5 V / 500mA.

Packing Content

• 1* Dual-mode Wireless Mouse

• 1 2.4G USB receiver ( For 2.4G connection only )
  1 Type-C Charging Cable

• 1* User manual

Specification

Product Preview

1. ON/OFF Switch: turns the mouse on and turn off.
2. Connect Switch: 2.4G/bluetooth 1/bluetooth 2 channel switch button.

a. Mouse re-pairing:

• Step 1. Turn off the mouse and plug out the 2.4G USB receiver.
• Step 2. Holding down “Left-button, Wheel button and Right-button” for 3s without loose, and then turn on the mouse.
• Step 3. Immediately insert the 2.4G USB receiver into the computer within 10s and keep the mouse close to the receiver within 30cm (0.98 ft ).

Bluetooth Connection

A. Wireless Bluetooth Connection

• Mouse pairing:
  • Step 1. Turn on the mouse.
  • Step 2. Click the “Connect button” to choose Bluetooth 1/2 channel.
  • Step 3. Hold and press the “Connect button ” for 5s to enter pairing mode.
  • Step 4. On your device, find the name of “BT 3.0 Mouse / BT 5.0 Mouse” and click to connect.

Sleep Mode

• The keyboard and mouse will enter sleep mode if idle for 10 seconds.
• Press any key to exit sleep mode.

Charging

• Step 1. Connect one end of the included type-c cable to a USB charger, and connect the opposite end to the charging slot on the keyboard or mouse.
  • ( Note: Output: DC 5 V / 500mA; USB charger is not included)
• Step 2. The charging indicator will glow red while the keyboard or mouse is charging. A full charge takes approximately 2 hours

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference  to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>