MELCO N1 Digital Music Library User Guide

N1 Digital Music Library

N1
Digital Music Library
Quick Setup Guide

Warning

• This product is not waterproof. To prevent fire or electric hazards, do not place any containers filled with liquid near this product (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

• To prevent fire hazards, do not place any naked flame sources (such as a lighted candle) on or near the product.

• This is a class A product. Class A devices are those that are marketed for use in a commercial, industrial or business environment. This product is only intended for professional use, and should not be used in an office or household environment.
  This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.

• Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazards, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) and never operate the product on thick carpeting or a bed.

Caution

• This product becomes warm, so be careful not to touch it to avoid hazards.
• This product is not suitable for use in locations where children are likely to be present.
• Make sure to leave space around the unit for ventilation to improve heat radiation (at least 20 cm; 7.9 in. at top and rear, and 5 cm; 2 in. at each side). Do not block the front of the unit such as with doors.

Operating Environment
Operating environment temperature and humidity: +5°C to +35°C (+41°F to +95°F); less than 80% RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).

Diagrams

Buttons and Ports

1. Power LED
2. Power Button ( )
3. Display
4. Back Button ( )
5. Menu/Enter Button ( )
6. Up Button ( )
7. Down Button ( )
8. USB 3.0 Port
9. Clock Generator Select Button
10. Connector for External Clock Generator
11. USB 2.0 Port for USB-DAC
12. USB 3.0 Port for USB-DAC
13. USB 3.0 Port for Expansion USB Drive
14. USB 3.0 Port for Backup USB Drive
15. Ethernet Port for Player
16. Ethernet Port for Router or Hub
17. SFP Port
18. Power Connector

Diagrams

Display – Home Screen

1. Status of Connected Router or Hub
   Connected
   Not connected

2. Status of Connected Player
   Connected
   Not connected

3. Markerless DSD Compatibility for USB-DAC (lit when connected)
   Markerless DSD-compatible
   Markerless DSD-incompatible

4. Optical Drive Indicator (lit when detected)

5. Expansion Drive Indicator (lit solid when detected, flashes when recognizing)

6. Backup Drive Indicator (lit when detected)

7. Friendly Name (Hostname)

8. IP Address

9. Status of Downloader
   Working
   Disabled
   An error occurred

10. Controller Settings (lit when a USB-DAC is connected)
    Hybrid mode enabled
    UPnP/DLNA-compatible mode enabled
    Playlist mode enabled
    Roon Ready mode enabled

11. File Sharing Indicator (lit when enabled)

12. Usage Capacity of Internal Drive

Note: The icons and the layout displayed may be different after future firmware updates.
For the latest information, refer to the product manuals available from our website.
Display – Menus and Dialogs

Menu Screen Press the Menu/Enter button ( ) while the home screen is displayed to bring up the menu screen.
Move the cursor by pressing the Up/Down button ( ) and press the Menu/Enter button ( ) to make a selection.
Dialog Screen The dialog screen will be displayed when confirming an operation. Press either the Up button ( ) or the Down button ( ) then the Menu/Enter button ( ) to make a selection.

Power On

Available Devices and Ports

Enabling the External Clock Generator

1. Turn the Digital Music Library Off

2. Connect the Clock Generator

3. Press the Clock Generator Select Button to Get It to the Unpressed Position Unpressed Position
   The external clock generator will become the master clock generator. If the clock generator has not been connected, the power LED will blink.
   Pressed Position (Default)
   The internal clock generator of the Digital Music Library will be the master clock generator.

4. Turn the Digital Music Library On

Importing Files

Checking Imported Files

For Mobile Devices
Install a UPnP/DLNA-compatible app to check the imported files and make sure importing was finished successfully.
For Computers

1. Enter “\\” and the N1’s IP address or friendly name (hostname) into the address bar of  Explorer, then press the Enter key.
   For macOS, click Go from Finder and select Connect to Server, then enter “smb://” and the N1’s IP address or friendly name (hostname).
   If the username and password are required, enter “nobody” for both.

2. The “Internal” folder will be displayed.
   Double-click the “Internal” folder and if all the imported files are displayed, import was finished properly.

You can also directly import files from the computer to the displayed “Internal” folder mentioned in the step above by dragging and dropping them from one folder to the other.

Preparing the Player for Playback

USB-DAC
After turning it on, you may be able to play music files by changing the input to USB. You can use ports other than the USB-DAC port, but only one device will be detected if two or more USB-DAC devices are connected.
Network Audio Player
After turning it on, you may be able to play music files by changing the input to music server or network. You can also use another player on the network rather than the player connected to the player port.
The N1 has an Ethernet port that can connect a Network Audio Player directly. Using this port is recommended for high quality audio playback. To play music files using a Network Audio Player, refer to the manual of the player before playing. The N1 will be used as a NAS (network-attached storage) device.

1. Select the Player

2. Select the Libraries or Files
   

3. Play

Play music files by using a UPnP/DLNA-compatible controller app on your mobile device or computer.
If playing music files on the Network Audio Player, it is best to use an app recommended by the player manufacturer.
If playing music files on the USB-DAC, it is best to use an app recommended by us. Recommended apps are listed on our website. You can also play music files using buttons on the N1.

Using SFP Ports Instead of Ethernet Ports

The SFP port can be used instead of the LAN port (the Ethernet port for router or hub) by using an SFP module (not included).

Specifications

Dimensions*
(W × H × D)| 440 × 82 × 353 mm;
17.3 × 3.2 × 13.9 in.
---|---
Weight| Approx. 14 kg; 31 lbs
Power Supply| AC 230 V, 50/60 Hz
Clock Input| BNC, 10 MHz, 50 Ω, 0.5–5 Vpp
Data Transfer Rates| LAN Port, Player Port (RJ-45): 100/1000 Mbps
SFP Port: Max. 1000 Mbps
Number of USB Ports| USB 3.0 (front): 1
USB 3.0 (rear): 3
USB 2.0: 1
Output Current| USB 3.0: Max. 0.9 A per port Max. 1.8 A total
USB 2.0: Max. 0.5 A

*Excluding protruding parts

Operation Manuals Available Online

Product specifications and operating procedures may change after future firmware updates to improve the product. For the latest information, refer to the product manuals available from our website. You can access the site using the URL or QR code at the right.https://melco-audio.com/downloads/

Additional Support and Service

If you need help or repair services, please send us an email by referring to our website, accessible using the URL or QR code at the right, or call the vendor from whom you purchased the product. ‘https://melco- audio.com/support/

References

• Downloads - Melco Audio
• Support - Melco Audio

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>