Bohmer-AG BOH-PWRSTA EcoPower Max Portable Power Station User Manual
- June 14, 2024
- Bohmer-AG
Table of Contents
Bohmer-AG BOH-PWRSTA EcoPower Max Portable Power Station
Read this manual carefully before use and keep it for future reference.
Failure to do so may result in injury, property damage and may void the
warranty.
Products covered by this manual may vary in appearance, assembly, inclusions,
specifications, description or packaging.
Thank you for choosing
Your support means the world to us We hope you enjoy our power station as much as we did creating it
Important safety information
- Do not attempt to modify the product in any way
- Using cheap unbranded accessories may cause electric shock
- Use in a well-ventilated envirnoment
- Store in a dry and well ventilated area avoiding rain/moisture
- Always remove the plug from power source when not in use
- Do not expose to fire or excessive temperatures. Risk of explosion if it reaches temperatures of 130° or higher
- Do not disassemble
- Do not use the product if damaged
It is essential you fully read this manual to ensure you are familiar with the
general safety features, precautions and functions necessary to operate your
power station.
Failure to do so may result in injury, damage to your power station or
personal items.
Quick Start Guide
- USB-C Output
- LCD Screen
- 12V Jump Start
- DC 12V-30V Input
- Back Up Battery Port / CP3500 Cable
- DC 12V/10A Output
- Output AC110V/220V 1000W
- USB Quick Charge Output
- USB 5V/2.4A Output
- CP3500 Cable
- Power Check Button
- Power Indicator Light
LCD Screen
LED Flashlight
To turn on the LED flashlight press the button next to the light on the back
of the unit. The flashlight has 3 modes which can be accessed when pressing
the LED button in order. The first mode is low, second mode is strong, third
mode SOS and if pressed for a fourth and final time it will turn it off.
DC Input
Press the DC input button to turn it on. The LCD screen will dsplay the
current charge and when it displays 100% it means it is fully charged. It has
three charging methods:
- AC adaptor (wall) charging – 7-8 hours
- Car charging – 10-11 hours
- Solar panel charging (12-30V) – 7-8 hours
12V Jump Start
- Connect the blue plug fully seated into the charger making sure the cable indicator if off
- Connect the red clamp to the positive (+) battery terminal and the black clamp to the negative (-) battery
- Operate using the following instructions of the cable indicator:
Green light on:
If the connection is correct and the circuit is working, you can turn on the
engine to jump start directly.
Green light blinking:
The vehicle battery is low. Press the “BOOST” button, wait until the green
light is solid, then turn on the engine within 30 seconds.
Red light on with buzzing:
If the connection is wrong and there is a buzzing sound then the clamps are
incorrectly placed. Adjust and wait until the green light is on to turn on the
engine.
No lights, no buzzing:
The vehicle’s battery may be damaged
After this you can start the vehicle, Once the vehicle has started, remove the jumper cable from the vehicle battery but leave the engine running
Battery Life
Safety Design Protection
- Output short-circuit protection
- Output over-current protection
- Over-charge protection
- Over-discharge protection
- Over-temperature protection
- DC anti-reverse charge protection
- Ultimate low electricity consumption protection
- Reverse polarity protection
Specifications
| Capacity | 472000mAh (59000mAh*8) |
|---|---|
| DC Input | DC12-30V (200W) |
| DC Output | Car charger plug + DC port x2 – 12V/10A |
| AC Output | 100V 60Hz / 220V 50 Hz |
| USB Output | USB-C PD 100W (5V/3A, 9V/3A, 12V/3A,15V/3A,20V/5A)x2 5V/2.4A x3 |
QC3.0 (5V/3A, 9V/2A, 12V/1.5A)
12V Jump Start| Start current – 500A Peak current – 1000A
Output Wave| 1000W sine wave
Battery| Lithium-ion
Lifecycles| 2000 cycles
Weight| 16.9Kg
Dimensions| 360mm x 270mm x 280mm
Operating Temperature| -20~55°C
Recharging Temperature| 0~55°C
CE Declaration of Conformity
We hereby declare that the machine described below complies with the relevant
basic safety and health requirements of the EU Directives, both in its basic
design and construction as well as in the version put into circulation by us.
This declaration shall cease to be valid if the machine is modified without
our prior approval.
The undersigned: Michael S McQuaide as authorised by: Union Mart Ltd
Declares that
Description: Portable Power Station
Identification code: Eco Power, Eco Power Pro, Eco Power Max
Conforms to the following directives and standards:
-
EC EMC directive 2014/30/EU
And Complies with the provisions of the following standards: -
EN 55032:2015
-
EN 55035:2017
Notified body: Shenzhen Carku Technology Co., Limited
The technical documentation is kept by: Union Mart Ltd
Date: 07/06/2021
Signed:
Michael S McQuaide
Chief Executive Officer
Name and address of the manufacturer:
Union Mart Ltd, Company No. 8384155. Registered address: Unit 4 Mauretania
Road,
Nursling Industrial Estate, Southampton, SO16 0YS, United Kingdom.
Please scan or visit bohmer-ag.com/warranty
Looking for help?
Contact us to get extra support
bohmer-ag.com
support@unionmart.co.uk
02380 642 687
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>