JBL Rallybar S Powered 21 Inch Bluetooth 8 Speaker User Guide
- May 16, 2024
- JBL
Table of Contents
JBL Rallybar S Powered 21 Inch Bluetooth 8 Speaker
Product Information
Specifications
- Transducers
- 4 x 2.75 (70mm) woofers
- 2 x 1 (25mm) Tweeters
- 2 x 7.2 (182.8mm) x 3 (76.2mm) Racetrack Passive Radiators
Product Usage Instructions
Mounting
To mount the JBL RallyBar, follow these steps
- Choose the appropriate C-Clamp size and rubber.
- Place the RallyBar on the desired surface.
- Use the hex wrench to tighten the cable, ensuring that the distance is over 2 inches (50mm) from the cable end.
- If needed, rotate the JBL logo badge to the desired position.
Bluetooth Connection
To connect your Bluetooth devices to the JBL RallyBar, follow these steps
- Make sure the RallyBar is powered on.
- Enable Bluetooth on your device.
- Search for available devices and select “JBL RallyBar” from the list.
- If prompted, enter the provided passcode to complete the pairing process.
Music Control
To control your music playback on the JBL RallyBar, use the following
buttons
- x1 : Play/Pause
- x2 : Previous track
- x3 : Next track
Map Light
The JBL RallyBar features a map light for reading. To control the map
light, use the following buttons
- Button 1 : Turn on/off the map light
- Button 2 : Cycle through different light patterns (Rock, Flow, Cross, Ripple, Flash, Mix, Static1, Static2, DIY)
Broadcast Mode
The RallyBar has a broadcast mode that allows you to change the light
behavior. To activate broadcast mode, press the button and select the desired
behavior.
Frequently Asked Questions (FAQ)
-
Q: How many mounting positions are available for the RallyBar and RallyBar S?
A: There are 4 mounting positions for both the RallyBar and RallyBar S. -
Q: How many mounting positions are available for the RallyBar XL?
A: There are 8 mounting positions for the RallyBar XL. -
Q: Can I rotate the JBL logo badge on the RallyBar?
A: Yes, the JBL logo badge on the RallyBar is rotatable. -
Q: How do I connect my Bluetooth devices to the RallyBar?
A: To connect your Bluetooth devices, make sure the RallyBar is powered on and enable Bluetooth on your device. Then, search for available devices and select “JBL RallyBar” from the list. Enter the provided passcode if prompted.
Quick Start Guide
Before using this
product, read the safety sheet carefully.
WHAT’S IN THE BOX 
DIMENSIONS
RALLYBAR XL 
MOUNTING
- Top mount view
- Back mount view
- Step 1 -Choose Cleat Mount options on soundbar
- Note : There are 4 (RALLYBAR &RALLYBAR S), or 8 (RALLYBAR XL) mounting positions for left cleat and right cleat;
- Step 2 -Put cleat on soundbar
- Step 3 -Choose C-Clamp Size and Rubber.
- Step4 -Mount soundbar on the pole.
- Note : JBL Logo badge is rotatable.
- Step 5-Safety Cable
- Tight the safety cable screws.
Note: Before using the hex wrench to tighten the cable, please make sure the distance is over 2″(50mm) from the cable end
WIRING AND POWERING ON
Main power switch
Power button
BLUETOOTH CONNECTION
USB DISK CONNECTION
AUX-IN &AUX OUT CONNECTION
MUSIC CONTROL
MAP LIGHT
RGB LIGHT
NOTE: Find out more
detailed information about RGB Light Brightness Setting Mode and RGB Light DIY
Setting Mode on Owner’s manual
BROADCAST MODE
PARTY MODE 
SPECIFIATION
| RALLYBAR| RALLYBAR S| RALLYBAR XL
---|---|---|---
Transducers|
- 4 x 2.75″ (70mm) woofers;
- 2 x 1″ (25mm) Tweeters;
- 2 x 7.2″ (182.8mm) x 3″ (76.2mm)
- Racetrack Passive Radiators
|
- 4 x 2.75″ (70mm) woofers;
- 2 x 1″ (25mm) Tweeters;
- 2 x 7.2″ (182.8mm) x 3″ (76.2mm)
- Racetrack Passive Radiators
|
- 8 x 2.75″ (70mm) woofers;
- 2 x 1″ (25mm) Tweeters;
- 4 x 7.2″ (182.8mm) x 3″ (76.2mm)
- Racetrack Passive Radiators
Output Power| 150WRMS; 300W PEAK (IEC60268)| 150WRMS; 300W PEAK (IEC60268)|
300WRMS; 600W PEAK (IEC60268)
THD at Rated RMS Power| <1%| <1%| <1%
Voltage Range| 9 – 16VDC| 9 – 16VDC| 9 – 16VDC
Quiescent Current Draw| <0.9A| <0.9A| <1.7A
Maximum Current Draw| 25A| 25A| 40A
Frequency response| 45Hz-40kHz| 45Hz-40kHz| 45Hz-40kHz
Signal-to-noise Ratio| > 80 dB| > 80 dB| > 80 dB
Cable type| 12AWG.| 12AWG.| 10 AWG.
Cable length| 12 Feet (3.66m)| 12 Feet (3.66m)| 12 Feet (3.66m)
Bluetooth® Version| 5.3| 5.3| 5.3
Bluetooth® profile| A2DP V1.3, AVRCP V1.6| A2DP V1.3, AVRCP V1.6| A2DP V1.3,
AVRCP V1.6
Bluetooth® transmitter frequency range| 2400 MHz – 2483.5 MHz| 2400 MHz –
2483.5 MHz| 2400 MHz – 2483.5 MHz
Bluetooth® transmitter power| ≤ 15 dBm (EIRP)| ≤ 15 dBm (EIRP)| ≤ 15 dBm
(EIRP)
Aux-In|
- 2Vrms (0.37Vrms – 2Vrms); 4Vrms (0.74Vrms –
- 4Vrms); 6Vrms (1.11Vrms – 6Vrms): (3.5 mm connector)
|
- 2Vrms (0.37Vrms – 2Vrms); 4Vrms (0.74Vrms –
- 4Vrms); 6 Vrms (1.11Vrms – 6Vrms):
(3.5 mm connector)
|
- 2Vrms (0.37Vrms – 2Vrms); 4Vrms (0.74Vrms – 4Vrms); 6Vrms (1.11Vrms – 6Vrms): (3.5 mm connector)
Aux-Out| 2 Vrms (3.5 mm connector)| 2 Vrms (3.5 mm connector)| 2 Vrms (3.5 mm
connector)
USB Drive File System| FAT32| FAT32| FAT32
USB Drive Maximum Capacity| 64GB| 64GB| 64GB
Soundbar Dimension (L x W x H)| 21-5/32″ x 4-5/8″ x 5-5/16″ (537.5 x 118 x
135.2mm)| 21-5/32″ x 4-5/8″ x 5-5/16″ (537.5 x 118 x 135.2mm)| 35-11/32″ x
4-5/8″ x 5-5/16″ (897.5 x 118 x 135.2mm)
Soundbar Weight| 11.57 lbs (5.25 kg)| 11.46 lbs (5.2 kg)| 20.83 lbs (9.45 kg)
Packaging dimensions (W x H x D)|
- 24″ x 7.6″ x 9″
- (611 x 193 x 229mm)
|
- 24″ x 7.6″ x 9″
- (611 x 193 x 229mm)
|
- 38.2″ x 7.6″ x 9″
- (971 x 193 x 229mm)
Gross weight| 17.14 lbs (7.79 kg)| 17 lbs (7.74 kg)| 27.5 lbs (12.52 kg)
Maximum operation temperature| 45 °C| 45 °C| 45 °C
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
- Rally bar S/Rally bar/Rally bar XL ** Rally bar XL
- Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES. www.jbl.com
- © 2023 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.
- CA_JBL Rally Bar_QSG_Global_SOP_V11