MAYTAG W11697092A Commercial Gas Dryer Instruction Manual
- June 14, 2024
- Maytag
Table of Contents
MAYTAG W11697092A Commercial Gas Dryer
Product Information
Specifications
- Product Name: Commercial Gas Dryer
- Model Number: W11697092A
Product Usage Instructions
Safety Instructions
Your safety and the safety of others are very important. Please read and
follow all safety instructions provided in this manual and on your appliance.
Safety Alert Symbol: The safety alert symbol alerts you to potential hazards that can cause serious injury or death. All safety messages in this manual will be accompanied by either the word DANGER or WARNING.
Install Labels
Important Note: The Label Kit is only required for installations in Greece, Italy, or Hungary. Apply all Labels supplied in the Label Kit as instructed.
Warning: Before servicing, always disconnect power to prevent electrical shock. Replace all parts and panels before operating the dryer. Failure to do so can result in death or electrical shock.
- Locate the part number printed on the individual Labels provided in the Label Kit.
- Refer to the diagrams on page 8 of these instructions to identify the correct locations for the replacement Labels.
Security of the Dryer
We have provided important safety messages in this manual and on your
appliance. Always read and respect all safety messages.
DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
Additional Safety Instructions
- Follow the instructions provided in this manual to reduce the chance of injury.
- Failure to follow the instructions may result in serious consequences.
- Always refer to the specific sections of this manual for detailed instructions on installation and usage.
- Do not modify or alter the dryer in any way that is not specifically instructed in this manual.
FAQ (Frequently Asked Questions)
Q: When is the Label Kit required?
A: The Label Kit is only required for installations in Greece, Italy, or
Hungary.
Q: What should I do before servicing the dryer?
A: Always disconnect power to prevent electrical shock. Replace all parts
and panels before operating the dryer.
Q: What happens if I don’t follow the instructions?
A: Failure to follow the instructions may result in serious injury or
death.
DRYER SAFETY
Your safety and the safety of others are very important.We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”These words mean:
DANGER
You can be killed or seriously injured if you don’t immediately follow
instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
INSTALL LABELS
NOTE: The Label Kit is only needed if the Dryer is installed in Greece, Italy, or Hungary.
IMPORTANT: Apply all Labels supplied in the Label Kit as instructed.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating. Failure to do so can result in
death or electrical shock.
-
Locate the part number printed on the individual Labels provided in the Label Kit.
-
Reference the diagrams shown in these instructions on page 8 to locate where the replacement Labels need to be installed on the Dryer.
NOTE: In some instances, multiples of the same Label are supplied due to multiple locations on the Dryer for the same label. -
Locate the existing Label on the Dryer that the replacement Label will be installed over.
-
Wipe the surface of the existing Label to remove any dust or oils, using a clean cloth.
-
Remove the Label from the backer and install on top of the existing Label.
NOTE: The replacement Label will be the same size and shape as the existing Label it will be installed over.
DIAGRAMS
©2023 All rights reserved.
Tous droits réservés.
Todos los derechos reservados. Με επιφύλαξη παντός δικαιώματος. Tutti i
diritti riservati.
Minden jog fenntartva.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>