taurus M91214890 Licuadora Blender Owner’s Manual

: June 14, 2024
: taurus

Table of Contents

taurus M91214890 Licuadora Blender
BEFORE STARTING
OPERATING INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

taurus M91214890 Licuadora Blender

taurus-M91214890-Licuadora-Blender-product-image

BEFORE STARTING

Dear Customer,

Thank you for purchasing a TAURUS• appliance. Its technology, design and functionality will give you total satisfaction for a long time.
Its technology, design and functionality will provide you with total satisfaction for a long time. TAURUS• actively participates in the preseNation of the environment. The packing materials of this appliance are recyclable. II you want to get rid of them. you can use the appropriate public containers for each type of material.

IMPORTANT

Read this user manual completely before assembling or starting to use your product.
Before connecting the appliance to the power source, check whether the mains voltage is compatible with the one marked on the appliance 127V -.
Remove all packing material from the product.
Follow cleaning instructions before using it for the first time.

TIPS AND SAFETY WARNINGS

READ ALL INSTRUCTIONS BEFORE ASSEMBLING AND USING THE PRODUCT. SAVE THESE INSTRUCTIONS FDR FUTURE USE.
KEEP THIS APPLIANCE AWAY FROM WATER, DD NOT USE NEAR SINKS DR OTHER CONTAINERS THAT MAY CONTAIN LIQUIDS.
PLACE YOUR APPLIANCE ON DRY, STABLE AND FLAT SURFACES. DD NOT PLACE THE UNIT NEAR OR OVER GAS OR ELECTRIC STOVES, NEITHER NEAR HOT OVENS.

DANGER: AS MOST ELECTRICAL APPLIANCES, THE PARTS OF YOUR APPLIANCE HAVE ELECTRICAL CURRENT WHILE IT IS CONNECTED ALTHOUGH THE APPLIANCE IS OFF.
WARNING: DANGER OF ELECTRIC SHOCK

Recommendations:

Use grounded outlet only
Do not use extension cords, adapters or timers.
Do not overload the electrical outlet where you are using this appliance.
Always place on dry and stable surfaces. Do not handle with wet or damp hands. Before connecting, check that the connection and the cord are completely dry.
Do not immerse in water or any other liquid. DO NOT USE IT IF THE PRODUCT FALL INTO THEWATER.

IMPORTANT SAFEGUARDS

Before using the product for the first time, clean all the components of the appliance that may come into contact with food according to the cleaning section of this manual.
Children should not use this device. Keep the device and the cable out of reach.
Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge.
Close suspension is necessary when any appliance is used by or near children or incapacitated persons. Be sure to store the appliance out of reach.
This unit is not a toy. You should sunrise children to make sure they do not play with the unit.
To reduce the risk of electrical accidents, never operate this unit with wet or damp hands, do not immerse in water, or place it on spilled liquids.
Do not leave the power cord hanging, or allow it to come in contact with hot or sharp surfaces.
Do not leave it or keep appliance near where there is a risk of falling or throwing it in the bathtub, sink or other water container.
If it accidentally fall into water, “unplug” it immediately. DO NOT introduce your hand in the water to take out.
Never use this unit if the power cord or plug is damaged, ii it is not operating property, if it has been dropped, damaged in any par, leaked, or accidentally dropped into water or liquid. Take the unit to an authorized snice center by the manufacturer for inspection and/ or repair.
Use this blender only for the purpose for what it was designed and described in this manual. Do not use accessories that are not recommended by the manufacturer.
Do not place the unit near or over gas or electric ranges, or near hot ovens.
You must not use it outdoors.
Watch oooo Tum off and unplug the appliance before start cleaning, changing accessories or storing it.
Always turn off and unplug your blender immediately alter use.
To avoid the risk of electric shock, do not insert anything into the cavities of the appliance.
If any of the enclosures of the appliance break, disconnect immediately from the electrical network to avoid the possibility of an electric shock
Do not force the power cord. Never use the power cord to transport, lift or disconnect the blender.
Never wrap the power cord around the appliance. Constantly check the perfect condition of the cable, as damaged or entangled cables increase the risk of electric shock. Do not let it get wrinkled or trapped.
DO NOT INSERT Am STRANGE OBJECT INTO lye JAR WHILE he BLENDER IS IN OPERATION, once your blender is turned off and unplugged you can use a rubber spatula to move the food, which must be removed from the jar before plugging the blender again.
IT IS NOT RECOMMENDED TO PROCESS HOT LIQUIDS OR INGREDIENTS, AS lei MAY GET PRESSURIZED AND SUDDENLY Ejected LID CAUSING SOME PHYSICAL INJURIES.
The manufacturer is not responsible for any damage caused by improper use of the device.
Never overfill the blender jar, be sure not to fill above the maximum level mark.
Make sure the unit is on a Ila, safe surface before it is turned on.
Make sure all electrical connections are clean and dry.
Make sure that the lid is property closed before turning on the unit.
Keep your face, hands and arms or any part of the body sensitive to heat away from the steam that may emanate from the lids orifice when processing warm or hot foods (not commended). Always start processing hot ingredients with lowest speed and DO NOT fill blender jar beyond the 1 liter level
Never leave the appliance unattended while it is in use.
Do not move or turn around the appliance while it is in operation or connected to the outlet.
When removing the blades for washing, be sure to assemble them correctly. Before using again make sure they are completely do\J.
Do not use the unit with timers or any device that automatically turns the device on and off.
NEVER put your hand or any foreign object into the blender jar, if it is placed over the blender engine and even less if the appliance is connected to the electret outlet.
Extreme caution if pouring hot liquids into your blender, as they could be thrown out of the appliance suddenly as a result of sudden steam.
Switch off and disconnect the appliance from the power supply, before handling, changing accessories or have contact with the moving parts of the appliance.

THE FAILURE TO FOLLOW ANY OF THE SAFETY WARNINGS, IMPORTANT SAFEGUARDS AND INSTRUCTIONS IS A MISUSE OF YOUR BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.

HOW TO EXTEND THE LIFETIME OFYOUR PRODUCT
- Do not remove the jar from the blender body until the blades have stop completely. This action will prevent the wear of the drive system.
- Make sure to assemble correctly the integrated blade assembly and the rubber ring to the jar before using the appliance to avoid any leakage that could damage the motor.

Parts of the blender

. Motorbuses
Control panel
ON/OFF button
Blades system
Integrated blade coupling
Sealing ring (rubber ring)
1.5 Liters glass jar
Hermetic lid
Fillercap

taurus-M91214890-Licuadora-Blender-image-1

OPERATING INSTRUCTIONS

Use and care

Before each use, fully unwrap the power cord of the appliance.
Do not use the appliance if its accessories are not properly attached.
Do not use the appliance with empty jar.
Do not use the appliance if the on/ off function does not work.
Do not move or turn around the appliance while it is in use or plugged to the outlet.
Do not exceed the maximum capacity indicated on the glass jar.
Unplug the appliance from the outlet when it is not in use, before removing or installing accessories and before starting cleaning.
Extreme precautions when handling the blades; either when emptying the jar, removing or putting them on the appliance and during cleaning. The blades of your appliance are extremely sharp and could cause damage.
Before each use, check that the moving parts are not misaligned or locked, that there are no broken parts or other conditions that may affect the proper functioning of the appliance.
Never leave the device connected and unattended, this will also save energy and extend the life of the device.
Do not forget to position correctly the sealing ring with the integrated blade assembly, since food or liquids could leak.
IT IS RECOMMENDED NOTTO USE THE BLENDER FOR MORE THAN 5 CONTINUOUS MINUTES. FOR EVERY 5 MINUTES OF USE, YOU SHOULD ALLOW IT TO COOL DOWN FOR 10 MINUTES BEFORE USING IT AGAIN.
Your produce, like any other blender, is not recommended for processing hot liquids or foods.

Assembling the jar

Insert the sealing ring into the integrated blade coupling.
Screw the blade system to the bottom of the jar by turning it counterclockwise to tighten.
Place jar assembly onto the motor base fitting the labs of the blade coupling into the slots in the base and turning clockwise. The click sound (Easy Fit Technology) indicates that the jar assembly is correctly attached to the motor base.
To remove the jar from the motor base, turn it counterclockwise and lift.

How to use

Put inside the jar the food that will be processed without exceeding the maximum indicated level (1.5 liters).
Place the lid with the assembled filler cap onto the jar and press down to seal hermetically.
Place jar assembly onto the motor base as it is indicated in the “assembling jar” section.
Plug the blender to the electric outlet.
Push the ON/OFF button , a light below the symbol will turn on indicating that the blender is on and ready to use.
Select the desire function by pushing the button with the symbol (see “Program selection” to learn how every program works), a light below the function symbol will turn on indicating the selected program.
Use the filler cap hole to add ingredients into the jar at any time while the blender is working.
When finished processing, turn off the blender by pushing the ON/OFF button and unplug the appliance from the power outlet.

Program selection

taurus-M91214890-Licuadora-Blender-image-3

Unclogging the engine

It could happen that food residuals may get under the blades or even the blend itself could be too thick and the blades could stuck, in that case stop the blender by pushing ON/OFF button, remove the jar from the motor base and unclog the food residuals with a rubber spatula, once you unclog the residuals, take the spatula outside the blender, close the lid, put the jar back onto the motor base following the section “Jar assembly” and continue to blend.

CLEANING

Push the ON/OFF button to stop the blender and unplug it from the power outlet. Wait until the appliance has completely cool down before start cleaning.
Clean the motor base unit with a lightly wet cloth with a small amount of soap and dry.
Do not apply solvents or any cleaning agent with an acid PH degree such as bleach, nor abrasives. Do not let water or any other fluid to enter into the ventilation grid, nor submerge the motor base in water or allow the direct contact of the waterjet.
In order to clean the jar, remove it from the motor base and wash it with a soft sponge and dish wash detergent. Allowed to completely dry before setting it back, wash the lid and the filler cap as well.
We strongly suggest to remove the sealing ring and the blades as well regularly and wash them with a soft sponge and dish wash detergent, before attach them back, these attachments should be completely dry before operating the blender again.

CARE AND MAINTENANCE

This appliance requires just a little maintenance since it does not contains any parts which could be repaired, so that do not try to repair them by yourself. If necessary take your appliance to an authorized service center or directly to the original place of purchase.

STORAGE

Be completely sure the appliance is turn off and unplug it from the electrical power supply, clean it as described on the CLEANING part and allowed to dry completely, then you can storage it in a clean, dry place away from the reach of the children or people with any sort of disability.

DEFECTS AND REPAIRMENT

If the electrical power supply cord is damaged in any way, it should be replaced directly by the manufacturer or in an authorized service center in order to avoid any personal hazard. Do not try to repair it yourself, do this for any other defect which ray further appear.

SPECIAL RECOMMENDATIONS

TAURUS will not be responsible for any defect which occur as a bad interpretation of the text frown this ins?auctions nahual In case you need further information contact directly with your seller.

GUARANTEE
This “blender” is guaranteed bell TAURUS for a 2 Clears lapse, starting from the purchase date.
TERMS

In order to apply the guarantee, you will only be asked to present the product itself and this policy, properly filled and sealed along with the actual date when this appliance was purchased, by the place where it was originally acquired or any authorized service center you are able to find through the directory attached within. Our guarantee includes repair, replacement or the physical change of the product or any attachment or spare part free of charge, this includes the labor as well as the shipping cost. The time spent to repair this unit will be a thirty working day period starting from the date when the unit was received by the authorized by the manufacturer service center where this guarantee can be claimed.
The customer can claim the guarantee directly through the place where the appliance was purchased, as well. Please note that if this guarantee is in misplaced or lost the customer can always go to supplier in order to ask for new guarantee policy by presenting his purchase ticket or invoice.

VOID OF THE GUARANTEE
This guarantee does not cover:

AL situation derivate of operating this product differently from the normal conditions.
AL situation derivate of operating this product differently from those guidelines mentioned in this instructions manual.
When this product had been disarmed, repaired or modal bill non-authorized bill TAURUS-ESPANA SA de CV. personnel.

No other guarantee, either verbal or print different from his one will be accepted bill TAURUS-ESPANA SA.DEC)!.
Original spare parts or attachments can directly be acquired through any of the authorized snice centers mentioned on the directory attached within.
In order to claim the guarantee of this product:

Take the appliance along with this polycell properly filled, sealed and dated bell the place where his unit was purchased, to the nearest authorized snice center. You can find the nearest to Lou home on the director attach within or at our web page: https:www.taurus.com.mx/servicio-tecnico/
If there is not an authorized snice center near Lou call BOO 777 8162 where someone will guide Lou on how to claim the guarantee.