BANG OLUFSEN 5V Beosound Explore Instruction Manual
- June 14, 2024
- bang olufsen
Table of Contents
BANG OLUFSEN 5V Beosound Explore
Product Information
Specifications
- Charging Adapter: Maximum 5V / 3A
- Charging Cable: USB-C
- Charging Time: Approximately 2 hours (using the included USB cable and a 5V / 3A charger)
Product Usage Instructions
Charging Instructions
We recommend charging your Beosound Explore before using it for the first
time.
- Connect the included USB-C cable to your Beosound Explore.
- Plug the other end of the cable into a charging adapter with a maximum rating of 5V / 3A.
- The battery indicator on the lower side of Beosound Explore will flash amber to indicate charging.
- Once the battery is fully charged, the indicator will turn green.
- If the battery level drops to 15% or below, the indicator will turn red and a sound prompt will be heard. At 10% or below, the indicator will flash red.
- You can check the battery status using the Bang & Olufsen App.
Charging from a Computer
You can charge your Beosound Explore using a USB-C connection from a
computer, but the charging time may vary depending on the computer’s charging
capability. It is recommended to use a charger with at least a 5V / 1A rating
and a maximum of 5V / 3A rating to charge Beosound Explore.
Switching On and Resetting
If your Beosound Explore does not switch on or respond to button presses,
you may need to perform a hardware reset. Follow these steps:
- Connect the speaker to power using the USB cable.
- Press and hold the power button.
Charging After Long Periods of Non-Use
If you cannot switch on your Beosound Explore after not using it for a long
period of time, follow these steps:
- Use a charger with at least a 5V / 1A rating, and a maximum of 5V / 3A rating to charge Beosound Explore.
- Refer to the article “What do the indicator lights on Beosound Explore mean?” for information about battery level status.
Using Beosound Explore While Charging
You can enjoy music while charging your Beosound Explore. Make sure to use
a USB cable or charger that provides a maximum of 5V / 3A.
Checking Battery Level
The battery level of your Beosound Explore cannot be viewed on the main
screen of a phone due to lack of support for a Handsfree Profile. However, you
can check the battery level using the Bang & Olufsen app.
Connecting the Charging Cable
To connect the charging cable to your Beosound Explore:
- Insert the cable fully until you hear a mechanical clicking sound.
- The light indicator will flash orange to indicate successful connection.
FAQ
-
Can I charge my Beosound Explore using USB-C from a computer?
Yes, you can charge your Beosound Explore using a USB-C connection from a computer. However, the charging time may vary depending on the computer’s charging capability. It is recommended to use a charger with at least a 5V / 1A rating and a maximum of 5V / 3A rating to charge Beosound Explore. -
Can I charge my mobile device while playing music on my Beosound Explore?
No, Beosound Explore does not offer a charging output for mobile devices. -
Why can I not check the battery level of my Beosound Explore on my phone?
Beosound Explore does not support a Handsfree Profile to view battery level on the main screen of a phone. However, you can check the battery level using the Bang & Olufsen app.
Beosound Explore charging instructions
- We recommend that you charge your Beosound Explore before using it for the first time.
- You can charge the Beosound Explore using the USB-C cable which is included in the box. The battery indicator flashes amber when charging and turns green when the battery is fully charged. At 15% battery level the battery indicator will turn red, and a sound prompt is heard. At 10% battery level or less, the indicator will be flashing red.
- You can always use the Bang & Olufsen App to check the battery status.
- Note: A charging adapter of a maximum of 5V / 3A can be used to charge your Beosound Explore.
Can I charge my Beosound Explore using USB-C from a computer?
Yes, but the charging time varies depend on laptop or PC charging capability.
Use a charger of at least 5V / 1A rating and a maximum of 5V / 3A rating to
charge Beosound Explore.
Battery indicator (on the lower side of Beosound Explore)
Green (solid)| Battery fully charged
Orange (flashing)| Battery charging
Orange (solid) (for 5 minutes)| Battery moderately low (under 40% charge
remaining)
Red (solid)| Battery low (under 20% charge remaining)
Red (flashing)| Battery critically low (under 10% charge remaining)
My Beosound Explore will not switch on or respond to button presses. What should I do?
In certain cases, a hardware reset might be required. To initiate a hardware reset, connect the speaker to power via the USB cable and press and hold the power button.
What do I do if I cannot switch on my Beosound Explore after not using it for a long period of time?
Use a charger of at least 5V / 1A rating, and a maximum of 5V / 3A to charge Beosound Explore. Please refer to the article What do the indicator lights on Beosound Explore mean? for information about the battery level status.
Can I charge my mobile device when it is running low on battery while playing music on my Beosound Explore?
Beosound Explore does not offer a charging output.
Can I play music while charging my Beosound Explore?
Yes, you can enjoy music while charging Beosound Explore. Remember to use a USB-cable or a charger providing a maximum of 5V / 3A.
Why can I not check the battery level of my Beosound Explore on my phone?
Beosound Explore does not support a Handsfree Profile to view battery level on the main screen of a phone. However, the battery level can be checked via the Bang & Olufsen app.
How do I connect the charging cable to my Beosound Explore?
Insert the cable fully until there is a mechanical clicking sound, and the light indicator flashes orange.
What do the battery level indicator lights on my Beosound Explore mean?
The battery indicator on the side of the speaker flashes orange when charging and turns green when the battery is fully charged. The battery indicator will briefly turn orange at 40% battery level to give an early warning indication of a lower battery level. This indication will disappear after 5 minutes. At 20% battery level, the battery indicator will turn red, and it will begin to flash red at 10% battery level. The battery status can always be viewed in the Bang & Olufsen app.
What is the battery life of Beosound Explore?
Battery life depends on a number of factors including volume level, intensity of music and equaliser settings. At a typical listening volume, battery life will be up to 27 hours.
Battery indicator (on the lower side of Beosound Explore)
Green (solid)| Battery fully charged
Orange (flashing)| Battery charging
Orange (solid) (for 5 minutes)| Battery moderately low (under 40% charge
remaining)
Red (solid)| Battery low (under 20% charge remaining)
Red (flashing)| Battery critically low (under 10% charge remaining)
What is the charging time for Beosound Explore?
Typical charging time is approximately 2 hours when using the included USB
cable and a 5V / 3A charger (which is maximum). However, charging times can
vary significantly depending on the charger type used.