Govee B0BCQ926C1 Permanent Outdoor Light User Manual

: June 14, 2024
: Govee

Table of Contents

Govee B0BCQ926C1 Permanent Outdoor Light
Safety Instructions
Pairing Your Light with the Govee Home App
Controlling the Light with Your Voice
Specifications
Troubleshooting
FCC and ISED Canada Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Govee B0BCQ926C1 Permanent Outdoor Light

Govee-B0BCQ926C1-Permanent-Outdoor-Light-product

Model: H705B

READ AND SAVE THESE INSTRUCTIONS

Safety Instructions

This product is rated as IP67 Waterproof. It can be used outdoors but being immersed in water is not recommended.
The control box and power adapter are both rated as IP65. They can be used outdoors but cannot be immersed in water.
To prevent the light string from falling down, ensure it is installed with both the adhesive tape and the clips.
Tighten up the waterproof cap before using the light.
Do not allow children to assemble and install this product.
Avoid installing this product near major heat sources or other dangerous sources.
Avoid using other non-standard adapters for this product.
External dimmers cannot be used with this product.
Use this product with the provided power adapter only.

What You Get

Govee-B0BCQ926C1-Permanent-Outdoor-Light-fig-4

At a Glance

a. Power Adapter
b. Control Box
c. Permanent Lights
d. Waterproof Connector

Pairing Your Light with the Govee Home App

What You Need

A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
A smartphone or tablet running iOS 8.0 (or above)or Android 4.3 (or above).

Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
Turn on the Bluetooth on your smartphone.
Open the app, tap the “+” icon in the top right corner, and search for “H705B”.
Tap the device icon and follow the on-screen instructions to complete the pairing.

Controlling the Light with Your Voice

Open the app, then tap the device icon to enter the details page.
Tap the setting icon in the top right corner.
Select Using Guidance and follow the on-screen instructions to control the device using your voice.

Specifications

Govee-B0BCQ926C1-Permanent-Outdoor-Light-fig-5

Troubleshooting

The adhesive tape is not strong enough. Use the clips to secure the strip lights firmly during installation.
Cannot connect to Bluetooth.
- Do not skip the Bluetooth connection in the app.
- Ensure the Bluetooth on your smartphone has been turned on.
- Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
- Power the light and your smartphone’s Bluetooth off then on, then try again.
- Ensure that your smartphone is within 1m/3.28ft of the light when connecting.
- Clear any obstructions that are between the light and your smartphone.
The light do not display the selected color fully/Some LED beads do not light up. Please contact the Govee support team for rapid product replacement.
Cannot sync the light to the beat of my music.
- Move the control box closer to the music source.
- Clean the mic on the control box then try again.
Cannot connect to Wi-Fi.
- Do not skip the Wi-Fi connecting steps in the app.
- 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
- Connect your smartphone to Wi-Fi and check whether the network works well.
- Make sure you have entered the correct Wi-Fi name and password.
- Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
- Connect hotspot in your phone to the lights and check whether the router works with the lights.
Cannot connect to Alexa.
- Pull out every connective part of the lights and firmly re-connect them.
- Re-connect your smartphone to Wi-Fi.
- Plug out the adapter port and re-plug it in.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radionic technician for help. This Class B digital apparatus complies with Canadian ICES-005. Cet appareil numerique de la classe Best conforme a la norme NMB-005 du Canada.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced. Not intended for illumination. Only used for creating ambiance.

Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
Do not use the rope light when covered or recessed into a surface;
Do not open or cut the rope light;

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.

Responsible party