Voom Sonic GO Series Stylish Toothbrush Instruction Manual

GO SERIES 1
THE STYLISH
TOOTHBRISH

Congratulations on the purchase of your new VOOM GO 1 SONIC toothbrush!
GO 1 SGNIC operates at 22,000 brush strokes per minute and includes a 2 minute timer  (30 second/quadrant) and auto shut-off for ckeaner, healthier teeth and gums.
The quadrant timer feature keeps track of how much time to spend in each quadrant of your mouth (toothbrush vibrations pulse twice every 30 second interval).

How to usa

1. Put toothpaste on the brush.
2. Push the power button firmly until vibration begins.
3. Brush teeth as recommended by your dental professional.
4. To tum G0 1 SONIC off, press button firmly until vibrations stop.

How to care for your GO 1 SONIE

1. After every use, rinse the brush head thoroughly with water.
2. shake excess water from bristles and dry your brush head before covering and storing.
3. Remove batteries if you won’t be using the item far an extended period of time.
4. To clean your GO 1 SONIC, wipe surface with a damp cloth. Make Sure the battery box is closed securely to pravent water from getting into the motor or battery compartment.

Do not immerse your GO 1 SONIC In Water.
Keep out of reach of children.

Ordering extra brush heads:

Replacement GO 1 SONIC brush heads are available. Please check with your place of purchase for more information.
FEEL THE VOOM!

Changing the Reptaceabie Toothbrush Head

1. Firmly hold the GO 1 SONIC base section with one hand and the base of the brush section with the offer.

2. Turn the brush section counter clockwise and when the brush disengages, pull the head off the base.
   Note: you co nod rotate the orush head you risk damaging the brush head or the main boxy.

3. Place the new bnash head on the stam of the base and turn clockwise until the brush is secure on the base.

Replacing the Battery

Alkaline batteries are recommended

1. Grip the GO 1 SONIC at the base of the brush section with one hand and the bottom of the base section with the other.
2. Tum the base section counterclockwise and pull down, exposing the battery box.
3. Remove the old battery. Insert a new AAA battery with the (-) side facing up.
4. Replace the base cover and turn clockwise until the base section is securely in place.
5. Batteries should be recycled or Gisposed of per local or state guidelines.

Note: When battery ts low, vibration gets weaker,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>