iScooter E9PRO Electric Scooter User Manual

iScooter E9PRO Electric Scooter User Manual

Product and parts

Whole scooter

Accessories

• Screw x 4

• Socket head wrench

• Charging adapter

Please carefully check the contents of the box are intact and complete.

Functional Sketch

The control panel

Speed display| Showing normal running speed while riding. Eco(Economic) mode Maximum 13kmh D(Driving)mode Maximum 20kmh,S(Sport) 25kmh, tribble clicks on the power button to switch from km/h to mph Eco 8mph D 12mph S 16mph
---|---
Battery indicator| There are four electric lights to indicate the amount of electricity. With battery consumption, the power light status will change from the top to the bottom in order of light on, flashing, and extinction. When 4 lights are on, the electricity is between 100%-80%; when 3 are lights on, the electricity is between 80%-60%. When the battery is used up, the four lights are all extinct, and the scooter will slide to the natural stop by inertia, please recharge it before using.
Power switch| When the scooter is power on, short press the switch to open the vehicle; long press the switch for 2S can turn it off. After turning on the vehicle, short press the switch can turn ON/OFF the Light; Press the switch twice in a row, switch between comfortable and sport mode.(The bottom light will be green when it changes to comfortable mode.)
Cruise control|

• Activate   CRUISE CONTROL mode: press and hold the accelerator lever at the same speed for 5 seconds.
• Turn off CRUISE CONTROL mode: Braking with the brake lever, the cruise control mode will turned off (when decelerating, the cruise control mode is turn off).

Body assembly

1. Secure the scooter stand pope and open the parking bracket.

2. Install the crossbar on the standpipe.

3. Use the hex wrench in the packing box to lock screws on both sides.

4. After the completion of the installation to carry out switch detection.

Charger connection

1. Open the rubber stopper

2. Insert the charging plug charging prug

3. After checking, close the rubber stopper the rubber stopper

Learn to Ride

There is a risk of falling injury during the study period, so please wear a helmet and a protective gear as shown.

1. Turn on the power and check the power indicator.
   

2. Stand with one foot on the deck & the other on the floor like a regular manual scooter
   

3. Push off with the foot whilst slowly and carefully pressing on the throttle switch until power is activated, (5km / h above the speed will start the throttle)

4. Decelerate by releasing the finger from the throttle.

5. When the focus is slightly tilted to the recovery system automatically open to help slow down,steering direction, and slowly turn the handle emergency brake need to shake the brake,handle at the front left handle.

Safety instructions

DO NOT ride in the rain

Drive slowly or avoid pot holes, lumps & bump. Please keep in the low speed (5-10km/h). Bend your knees & relax your elbows to better adapt to the complex road.

Do not ride your scooter through doors.

Do not accelerate at downhill elevators and other obstacles.

Do not press the throttle when walking

Be aware of your surroundings.

Do not hang heavy objects such as backpack on the handlebar

Keep both feet on the deck whilst riding

Do NOT ride your scooter on roads or turn your scooter suddenly

It’s illegal to ride electric scooter on main roads and residential areas

DO NOT to turn the handlebars at high speed

DO Not Ride your scooter in water

DO NOT allow more than one person at a time to ride the electric scooter or driving with children.

DO NOT to step on the back of the fender.

Do not touch the disc brake

It is forbidden to not hold the handlebar when driving
It is forbidden to ride electric scooters upstairs and downstairs or jump obstacles

Safety instructions

• An electric scooter is not a toy, and if driven in a public area, there are possible safety risks like all modes of transport. Strictly following the instructions in this manual to drive for the maximum extent to protect you and the others’safety, and to ensure compliance with national and provincial traffic regulations and traffic regulations.
  At the same time, you need to understand: Once you have an electric scooter on a public road or other public place, you may be exposed to the risk of unauthorized driving/improper operation of others or scooters, even if you are in full compliance with this safe driving guide. Like walking or cycling may also be hurt by other means of transport. As with all scooters, the faster the electric scooter is driving, the longer the brakes need, and the emergency brakes on some smooth surfaces can also cause the wheels to slip and lose balance or even fall. Therefore, it is important to be vigilant and maintain the proper speed during driving, ad it is important to maintain a reasonable safety distance with others and the transport means. Please be vigilant and drive at low speed before entering unfamiliar terrain.

• Please respect the right of pedestrian way when driving. Avoid alarming any pedestrians, especially children.
  When passing pedestrians passing , ring the bell and slow down when passing. As far as possible from the left side of the pedestrian (applicable to the country where the scooter is traveling right). Face to face with pedestrians, keep on the right and lower speed. We must strictly follow the safety requirements of this manual for riders in countries and regions, where there are no national standards and regulations for electric scooters. We will not be liable for any liability, personal injury, accident, legal dispute, and all other unfavorable events resulting from the use of violating the instructions indicated in this manual.

• Do not lend the electric scooter to a person who does not know how to operate the scooter. If lending the electric scooter to a friend, be sure to be responsible for the safety of your friends, you should teach him(her), and tell him(her) must heed all of the safety precautions.

• Please check the electric scooter each time before driving. If you find that the parts are loose, the battery life is obviously reduced, the tire is slow to leak or excessive wear, turn to abnormal sound or malfunction, please stop using it immediately

Folding and transporting

Make sure that the electric scooter is turned off. Open the folding wrench, and fold the handle bar onto the rear mudguard. Hook the bell hook onto with the rear mudguard clip . When opening you need to press the bell hook at the hook &then return the vertical standpipe to normal position & and lock folding plate back securely.

After folding, hold the standpipe with one hand or both hands to transport.

Daily maintenance

Electric scooter cleaning and storage

If the electric scooter body surface scratches, please use a soft cloth dipped in a small amount of water to wipe; if there is difficult to clean the dirty, you can use toothpaste and wash with a toothbrush repeatedly, and then use a damp cloth to clean. If there are scratches in body plastic, you can use sandpaper or other grinding materials to polish.

Prompt: Do not use alcohol, gasoline, kerosene or other corrosive, volatile chemical solvent cleaning, otherwise it will seriously damage the appearance and internal structure of the body. It is forbidden to use a pressure water gun to spray and flush,and ensure that the electric scooter is closed all along and the charging cable has been unplugged and the rubber cap is tightened. Otherwise, it may cause electric shock or serious failure due to internal water intake.

When not in use, try to store electric scooter s and tire aging and reduce the lift of electric scooters and their battery pack.

Electric scooter battery maintenance

1. Do not use other models or brands of batteries, or there may be a security risk.
2. Do not touch the battery contacts, and do not open or expose the shell. Avoid metal objects touching the battery contacts to cause a short circuit. Or it may cause damage to the battery or personal injury or death.
3. Only use the original charger to charge, otherwise there is a risk of damage or fire.
4. Improper disposal of used batteries may cause serious contamination of the environment. Observe local regulations when discarding this battery pack. Do not dispose of the battery pack, to protect the natural environment together.
5. After each use, please recharge the battery and then store, and it is conducive to extend battery life

Do not place the battery in a high temperature environment higher than 50°C or below -20°C (for example, do not place the electric scooter or its battery pack put it under summer exposure in a car), and do not put a battery into a fire. Otherwise it may lead to battery failure, overheating, and even fire risk. When not using for more than 30 days, please be fully charged, stored in a cool dry place, and fully charged every 60 days, or it may damage the battery, and this damage is not within the warranty.

To avoid the full exhaustion of electricity and recharge, as far as possible with the charge with the use, which can greatly extend the battery life. In addition, at room temperature, the battery pack can play a higher mileage and performance; And if it is used in an environment below 0°C, battery life and performance will drop. Typically, at -20°C, the mileage may be only half or less at room temperature. And the temperature rises, the battery mileage will be restored.

Prompt: A fully charged electric scooter, depleting its stored power after about 120-180 days of standby. The battery inside has the smart chip to record the battery charge and discharge situation, and prolonged non charging damage will not be recharged, at this time if not timely charging, it is likely to lead to excessive battery discharge damage, this damage is irreversible, and can not enjoy free warranty. (Note: Non-professional personnel is prohibited to the remove the battery pack, or it may be lead to serious security incidents due to electric shock or short circuit!).

Disc brakes debugging

If you feel the brakes are too tight, please use the M5 hex wrench counterclockwise to release the pressure plate screws on the disc brake seat, return the brake line to make the exposed tail length slightly shorter, and lock the pressure plate screws; If you feel the brake is too lose, release the pressure plate screws, drag the brake cable to make the exposed tail length slightly longer, and then lock the pressure plate screws.

Handle shake debugging

If your standpipe in electric scooter is shaking, please use the M5 hex wrench to lock the two screws at the fold mechanism.

If your electric scooter front and rear tires are soft, please use the hose to connect tires & the pump to inflate:

Model parameter table

Riding requirements

| Max loading| 120KG
Applicable age| 14-50 years old
Applicable height| 120-200cm
Main parameters| Max speed| 25KM/H
Range (km)| 18-28KM(depends on battery capacity)
Climbing ability| ≦15°
Applicable terrain| Flat dirt road, no higher than 1cm steps, no more than 3cm wide channel
Working temperature °C| -10~40
Storage temperature °C| -20~45
Protection levels| IP54
Battery parameter| Rated Voltage (VDC)| 36V
Max charging voltage（VDC）| 42V
Rated power (W)| 350
Motor parameter| Max power (W)| 700
Rated power (W)| 71
Rated input voltage (VAC)| 110-240V
Rated output voltage (VDC)| 42V
Rated current (A)| 1.7V
Charging time| 5-6H

1. Body height: the distance from the ground to the top of its body.
2. Typical life: When the electric scooter is full, 75kg load, 25 degrees Celsius, flat road without wind environment, in the energy-saving mode to keep at 15km/h even speed conditions measured, the actual life due to load, temperature, wind speed, road and operating habits and other factors to be different.

Note: Data and parameters vary with different models. Subject to change without notice.

Name and content of harmful substances in the product

Diphenyl ehters (PBDE)
Charger| X| O| O| O| O| O
Battery| X| O| O| O| O| O
Air tap| X| O| O| O| O| O
Charging port| X| O| O| O| O| O
Master Control board| X| O| O| O| O| O
Instrumentation circuit board| X| O| O| O| O| O
Wheel motor| X| O| O| O| O| O
Scooter frame| O| O| O| O| O| O
Tire| O| O| O| O| O| O
This table is formulated in line with the SJ/11364.
O: Indicate that the content of this harmful substance in all homogeneous materials of this components is below the limit prescribed in GB/T 26572X: Indicate that the content of this harmful substance in at least one homogeneous materials of this components is beyond the limit prescribed in GB/T 26572

Warranty policy

For Electric scooter after-sales service contact the distributor

The warranty content

forehead main body, middle tank instrument board, rear wheel, brake disc, disc brake assembly, folding handle, front fork, front fork tube rotating parts, the control bus and brake line| One year
Accessories| Battery charger, brake and finger, switch| Six months
Wearing parts of appearance| Anti-collision strip, headlight assembly, instrument cover, tires, outer tubes, inner tubes, bell components, fender, rear taillights, decorative cover, foot support components, battery compartment, cover, foot pad, charging port seat and rubber stopper| Three months

Notes: Socket head wrench and extended inflatable mouth as the product random supplies, and it has no warranty period.

Non-warranty regulations

1. Unauthorized repair, misuse, collision, negligence, abuse, infusion, accident, alteration, improper use of non product accessories or torn, altered label and anti-counterfeit mark;
2. Has been beyond the period of validity of the three guarantees;
3. Any damage is caused by force majeure;
4. Does not conform to the listed performance situation in the Performance Fault list of Electric Scooter Performance Table;
5. Due to man-made causes of this product and its accessories produce listed performance fault in the Electric Scooter Performance Table;
6. Damage caused by man-made reasons (including but not limited to the liquid entering into scooters, puncture, impact, the traces and damage of the normal use of the appearance, etc):
7. NOT FOR COMMERCIAL USE .

The performance fault table of electric scooters

Under normal use, the controller appears a failure
Under normal use, battery appears failure
Under normal use, appearing deformation, break can not continue to use

Optional MINIROBOT Mobile APP
Please search and download MINIROBOT App in App Stores Make sure your phone’s Bluetooth function is turned on Connect your phone with your eScooter.

IMPORTANT!
Always wear a helmet and safety protectors to avoid personal injury in case of possible falls.

It must be used on flat and safe private grounds and respect the local traffic regulations.
Overload, use on a lawn will damage the power supply and motors, also voids the warranty.
Charge for 5 hours prior to first use, regular charge required to keep battery in good condition.
Keep the original packaging for future use, it contains important information and maybe used for potential servicing

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>