lynker YM02 Rechargeable Electric Salt and Pepper Grinder User Manual
- June 14, 2024
- lynker
Table of Contents
lynker YM02 Rechargeable Electric Salt and Pepper Grinder
Notice
- The grinder has the locking protection function. When grinding the stone, the grinder will automatically start the protection function to stop working, please clean the stone in the seasoning before continuing to use.
- Do not over-adjust the coarseness adjustment rod at the bottom of the grinder. If the adjustment is too tight, the grinder may stop rotating, and if ii is too loose, the adjustment knob may fall off.
- The grinder can only grind dry seasoning, it is not suitable for grinding wet or fine seasoning. If your seasoning is wet, please let it air dry for more than 48 hours before grinding.
- Grind seasonings up to 5 mm in diameter. Clean the grinder every 6 months or according to individual needs. Do not immerse the grinder in water or any other liquid.
- The output voltage of the grinder is “;!.5V/2A. The grinder can be powered by USB and then plugged into a mobile power supply, G power supply or 5V car USB for charging. If the supply current is less than 2.0A, it may lead to insufficient power supply.
- The package box contains 2 type-C charging cables, no adapter included.
- Please fully charging the grinder before using it for the first time.
Operation Guide
-
Follow the arrow prompts to rotate the grinder to the unlocked position and pull ii up to open.
-
Fill the prepared pepper or coarse salt into the container, then install the grinder and turn it to the locked position.
-
Remove the dust cover, then turn the adjustment knob at the bottom of the electric grinder to select the gear of grinding coarseness according to your needs.
Note:The grinder is equipped with a warm and soft LED light that turns on automatically when grinding. -
Just press the switch once, the grinder will start grinding spices without keeping your finger on the switch during use. Or you can choose the 10-second timer function, the grinding will stop automatically after the 10 seconds countdown.
Power Supply
Note: if the power supply current is less than 2_QA, ii may result in insufficient power.
Product Parameters
Input voltage: | 5V/2A |
---|---|
Battery capacity: | 1000mAh |
Charging current: | 0.5A |
Charging method: | base charging; Type-C USB charging |
Working time: | continuous grinding for 1 hour |
Speed: | 9000RPM |
Transmission ratio: | 1:128 |
Torque : | 1 N. M |
Noise: | <40 dB |
Container capacity: | 38ml |
Timing function: | 10s |
Length of power cord: | 80 cm |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>