YELLORE FL-240W Outdoor LED Flood Light Instruction Manual
- June 14, 2024
- YELLORE
Table of Contents
LED LIGHT SMANUFACTURER
STALLATION INSTRUCTIONS
FL-240W Outdoor LED Flood Light
-
Choose the installation
-
1. Install the lamp into where you need.
2. Use some expansion Nails to fix the bracket of the lamp.
3. Connect the power cord as following diagram then make waterproof protection.
4. Adjust light fixture to the angle as you want, and then fix it.
5. When you use junctionbox and strain relief, please make sure to follow the installation requirements as below:
Material: Zinc-iron Turn off power supply.
The diameter of the hole for power cord do not more than 100mm Put the power cordin the junction box, and make a knotin the cord as strain relief.
Connect the wire in the junction box by close-end connector as following diagram, Please note that the the green/yellow wire should be connected to the ground.
6. Finally, ix the junction box cover with screws.
LED FLOOD LIGHT
Documents / Resources
|
YELLORE FL-240W Outdoor LED Flood
Light
[pdf] Instruction Manual
FL-240W Outdoor LED Flood Light, FL-240W, Outdoor LED Flood Light, LED Flood
Light, Flood Light, Light
---|---