Gwenttin LED Magic Book Lamp User Guide

Gwenttin LED Magic Book Lamp

Introductions

1. The LED book lamp is featured with a creative switching mode.When you open the book lamp, soft light will brighten your life, and it will be of when you close the book lamp.The lamp will be completely powered off after you close.
2. With innovative design, the book lamp can be adjusted to different forms. You can choose a form that you expect to create a pleasing innovative space. In addition,the book lamp is portable and rechargeable. Its built-in Lithium-ion battery which keeps the lamp illuminating for 5-6 hours. Therefore, you can use it anywhere without worrying about power source.
3. Powerful magnet is embedded in the front and rear cover so that the lamp can be attached to any metal surfaces. Pages of the book lamp are made up of krafe paper which is durable, environment friendly and 100% recyclable.
4. The LED book lamp is powered by a professional power supply chip, which could not only ensures the consistency of light intensity and avoids lighting tensity receding-in the process of using, but also improve the energy efficiency and extend the battery life.
5. Mobile phone Bluetooth can be connected to to the LED book lamp,and it can play mobile phone music.
6. Bluetooth Speaker, intelligent voice controlling (English), and intelligent remote controlling. Voice controls on/off light, color light brightness, magic mode and song playing

Shape combination

The LED lamp with novel shape, and can complete a variety of shapes, The open angle is from 0 degrees to 360 degrees.

Lighting and color and switch change

1. Continue mode(always on): yellow, green, purple, blue
2. Breathing light mode: yellow, green, purple and blue flash alternately

Indicator and charging

The indicator is on and red when the battery is being charged, and it will become blue when the battery is fully charged.

In the box

• LED book lamp*1
• USB cable*1
• Remote control*1
• Manual*1

Specifications

How to use

Please charge the lamp continuously for about 3 hours before using it for the first time. Local voice offline control (voice operation within one meter)

1. Turn on the LED book lamp and play music. When the music ends, please say “Magic Book”, the book will answer “My lord, I am here”, enter the voice command state, the voice command state time is 6 seconds. If you do not issue a voice command within 6 seconds, you must Repeat the wake word “magic book” to enter the voice command state.
2. 2. The following are the words of the local offline voice commands. Turn on the light Lights off, Turn off the ligh
   • Yellow light
   • Green light
   • purple light
   • Blue light
   • Switch the lights colors, change the lights colors, change light
   • Magic light mode
   • Brightness up
   • Brightness down
   • Maximum brightness
   • Minimum brightness
   • Play the music, start playing
   • Pause play
   • Keep playing
   • Next song
   • Last song, Previous song
   • volume up, Increase volume
   • volume down, Reduce volume
   • single cycle, Single repetition
   • Order cycle, Play in Order
   • Turn on voice prompt
   • Turn off voice prompt, key voice prompt off
   • Timer function on
   • Cancel timer function
   • Count down thirty minutes
   • Count down one hour
   • Count down two hour
3. If the LED book lamp is playing music. Please say “magic book”, the book will answer “My lord, I am here”, enter the voice command state. The voice command state time is 6 seconds. If you don’t give a voice command within 6 seconds, you must repeat the wake word “magic book”.
4. After opening the book, operate to say the wake-up word: “magic book”; enter the voice-activated command state, the voice-activated state time is 6 seconds, after the voice-activated command (within the voice-activated time, there is no other operation), you can actively exit, the exit command is: “goodbye or see you”
5. The LED switch key of the remote control, when the LED light is turned on, there will be a voice prompt to broadcast: Welcome to use the magic book, After calling the magic book to respond, you can command Turn on the light, Turn off the light, change the light, Switch the lights colors, Magic light mode, Brightness up, Brightness down, Play the music, Pause play, single cycle, Order cycle, Increase volume, Reduce volume, Next song, Previous song etc. Voice prompts can be turned on or off by voice commands, say the wake-up word: “magic book”; enter the voice command state, say: Turn on voice prompt or Turn off voice prompt ( key voice prompt off ).
6. The minimum volume key on the remote control is a dual-function key. You can turn on or off the countdown function through voice commands， say the wake-up word: “magic book”; enter the voice command state, voice commands： Timer function on(the button switches to the countdown function). Voice command: Cancel timer function. (Turn off the countdown function, the button switches to the minimum volume function).

Operating Remote Control

(When you use the remote control for the first time, please pull out the clear plastic sheet from the remote control)

• LED on/off
• LED brightness reduction (five brightness adjustments)
• LED brightness enhancement ( five brightness adjustments) Breathing mode ( two breathing modes: pressing one time,the lamp enter the current color breathing changing mode,and pressing again, the lamp will switch colors in order(yellow,green, purple and blue), and flash alternately.
• Switch between music loop and sequence play mode
• LED color switching: each pressing changes a color, and there are four colors for switching
• Track volume reduction
• Track volume minimum (5% micro volume) (Version B: countdown timing button)
• Track volume increased
• Previous track
• Track pausing or playing, press the button one time to stock,and press it again to play
• Next track

Bluetooth Mode

1. Open mobile phone Bluetooth, and update the available devices,and click to connect “ Magic Book”。
2. The battery level of the LED book lamp will be displayed under Bluetooth mode.
3. When the battery power is lower than 3%, the device will prompt charging, and the remote control and music function will stop working (special reminder: please connect the USB power supply when using the countdown function, so as to avoid the countdown function being suspended due to low battery power).

Safety and Precautions

• Please strictly observe the following rules, violation of these rules may be dangerous to use this product safely and effectively be sure to read the following information before using.
• Please do not place and use the product in direct sunlight or in high temperature or abnormally low-temperature environments in summer, which will cause the product deformation and damage to the battery of electronic devices.
• Please do not place and use the product in a wet environment. It is not waterproof, please be careful not to let the liquid in the lamp soaking in water and damp may cause internal circuit operation failure.
• Please place the product in a stable place to prevent the damage of the product and its electronic devices caused by violent shock and fall. Please do not press the product or place heavy objects on the product to prevent the rupture of the book and avoid personal injury.
• Please do not place the product in the place where the dust is dirty and corrosive gas is generated. Otherwise,the normal use of the product will be affected.
• Please do not use chemical solvent to wipe the surface of the product. If the shell is dirty, please use a soft cleaning cloth dipped in a litle pure water or weak acid cleaner to wipe.
• Please do not disassemble and open the product without permission （only by the company or authorized maintenance center maintenance personnel), so as not to cause the product scrap.
• Please keep the product and its accessories out of the reach of children to avoid physical injury and damage to children.
• Please do not place the product near the magnetic field to avoid magnetic interference.
• Please use a 5V charger to charge in a well-ventilated place with normal temperature.
• During the charging process, the product will heat slightly, which is normal.

FCC STATEMNT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>